• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.2
• /
• pp.161-168
• /
• 2008

In this paper, a tuned liquid mass damper(TLMD) was proposed and experimentally investigated on its control performance, which can control bi-axial responses of building structures by using only one device. The proposed TLMD controls the structural response in a specific one direction by using a liquid sloshing of TLCD. Also, the TLMD reduces the response of structures in the other orthogonal direction by behaving as a TMD that uses mass of the container itself and liquid within container of TLCD installed on linear motion guides. Force-vibration tests on a real-sized structure installed with the TLMD were performed to verify its independent behavior in two orthogonal directions. Test results showed that the responses of a structure were considerably reduced by using the proposed TLMD and its usefulness for structural control in two orthogonal directions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.213-217
• /
• 2008

In this paper, a new design method for IMC-PID that adds a phase scaling factor of system identifications to the standard IMC-PID controller as a control parameter is proposed. Based on analytically derived frequency properties such as gain, phase margin and maximum magnitude of sensitivity function, this tuning rule is an optimal control method determining the optimum values of controlling factors to minimize the cost function, integral error criterion of the step response in time domain, in the constraints of design parameters to guarantee qualified frequency design specifications. The proposed controller improves existing single-parameter design methods of IMC-PID in the inflexibility problem to be able to consider various design specifications. Its effectiveness is examined by a simulation example, where a comparison of the performances obtained with the proposed tuning rule and with other common tuning rules is shown.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.334-337
• /
• 2003

본 논문에서는 멀티웨이브릿 변환영역에서 스토케스틱 모델과 지각적 동조특성을 이용한 적응 디지털 워터마크 은닉 방법을 제안한다. 워터마크는 4레벨로 분해된 멀티웨이브릿 변환영역에서 최저주파 영역과 최고주파 대역들을 제외한 중간 및 고주파 영역에, 인간 시각 시스템(human visual model ： HVS)을 이용한 JND(just noticeable difference) 특성과 NVF(noise visibility function)를 이용한 통계적 특성을 기반으로 정상상태 가우시안 모델에 따라 지각적 동조 특성을 이용하여 적응적으로 은닉된다. 실험 결과 제안한 방법에서 에지나 텍스쳐 영역에 더 강하게 삽입할 수 있었고, 평탄영역에서 보다 적응적으로 은닉할 수 있었으므로 우수한 비가시성과 강인성을 확인하였다

• Journal of Sensor Science and Technology
• /
• v.10 no.1
• /
• pp.1-8
• /
• 2001

Conventional microgyroscopes of vibrating type require resonant frequency tuning of the driving and sensing modes to achieve high sensitivity. These tuning conditions depend on each fabricated microgyroscopes, even though the microgyroscopes are identically designed. A new micromachined resonator, which is applicable to microgyroscopes with self-toning characteristics, is presented. Since the laterally driven two degrees of freedom (2DOF) resonator was designed as a symmetric structure with identical stiffness in two orthogonal axes, the resonator is applicable to vibrating microgyroscopes, which do not need mode tuning. A dynamic model of the resonator was derived considering gyroscopic application. The dynamic model was evaluated by experimental comparison with fabricated resonators. The microgyroscopes were fabricated using a simple 2-mask-process of a single polysilicon layer deposited on an insulator layer. The feasibility of the resonator as a vibrating microgyroscopes with self-tuning capability is discussed. The fabricated resonators of a particular design have process-induced non-uniformities that cause different resonant frequencies. For several resonators, the standard deviations of the driving and sensing frequencies were as high as 1232Hz and 1214Hz, whereas the experimental average detuning frequency was 91.75Hz. The minimum detuned frequency was 68Hz with $0.034mVsec/^{\circ}$ sensitivity. The sensitivity of the microgyroscopes was low due to process-induced non-uniformity; the angular rate bandwidth, however, was wide. This resonator could be successfully applicable to a vibrating microgyroscopes with high sensitivity, if improvements in uniformity of the fabrication process are achieved. Further developments in improved integrated circuits are expected to lower the noise level even more.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.5 s.45
• /
• pp.1-10
• /
• 2005

This study proposes a fatigue reliability evaluation procedure for steel-composite high-speed railway bridge based on dynamic analysis and investigates the effectiveness of Tuned Mass Damper(TMD) in terms of the extension of fatigue life of the bridge. For the fatigue reliability evaluation, the limit state is determined using S-N curve and linear fatigue-damage accumulation. Dynamic analyses are peformed repeatedly to consider the uncertainties of train-velocity and damping ratio of the bridge. The distribution of random variables related to fatigue damage for the intended service life is then statistically estimated from analytical results. Finally, the fatigue reliability indices are obtained by means of the Advanced First-Order Second-Moment (AFOSM) method. Through numerical simulation of a steel-composite bridge of 40m span, the effectiveness of TMD on fatigue life of the bridge is examined and the results are presented.

• Journal of the Korean Home Economics Association
• /
• v.41 no.9
• /
• pp.1-16
• /
• 2003

This study examined the clothing behavior in terms of creativity, individuality and conformity. The subjects were 317 boys(mean age: 18) and 312 girls(mean age: 18) in third grade of high school, in which were situated at north and south part of Han-River in Seoul. They were administered with the following questionnaires to measure the attitudinal and behavioral conformity, creativity, individuality, clothing conformity, clothing nonconformity, clothing confidence, aesthetic sense, clothing importance, fashionability. Results indicated that (1) high school students who have high creativity showed higher scores in clothing nonconformity, clothing confidence, aesthetic sense, clothing importance than those who have low creativity. But there were no significant differences between two groups in clothing conformity and fashionability(p<0.001). (2) High school students who have high individuality showed higher scores in clothing conformity clothing, nonconformity, clothing confidence, aesthetic sense, clothing importance and fashionability than those who have low individuality(p<0.001). (3) Students who have low attitudinal conformity showed higher scores in clothing nonconformity, clothing confidence and aesthetic sense(p<0.001) and lower score in information and norm specific clothing confirmity(p<0.05) than those who have high attitudinal conformity. And those who have high behavioral conformity showed higher score in clothing confirmity than those who have low behavioral confirmity(p<0.05). From these findings, we could find that the importance of creativity and individuality was greater than that of conformity in clothing behavior. These results were discussed and following studies were suggested.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.7
• /
• pp.1341-1352
• /
• 2001

When segmenting consumers according to their fashion adoption behavior, it has been assumed that consumers' fashion conformity and innovativeness characteritics are negatively correlated. The purpose of this study was to examine the relationship between conformity and innovativeness and that these two attributes exist independently. The research problems of this study were to segment consumers according to the degrees of conformity and innovativeness, and to identify differences in reference groups and clothing purchasing behavior among the segments. The results of the empirical study showed that the fashion conformity and innovativeness were in and innovativeness; High conformity/High innovativeness group(HC/HI), High conformity/Low innovativeness group (HC/LI), Low conformity/High innovativeness group(LC/HI?, and Low conformity/Low innovativeness group (LC/LI). When the groups were compared in their reference groups and purchasing behavior, it was found out that HC groups were more influenced by reference groups than LC groups. When HC/LI and HC/HI groups were compared, HC/LI group was more influenced by their parents and siblings, while HC/HI group was more influenced by upper class and celebrities. Both groups were mostly influenced by friends and desirable passengers on the street. Friends and passengers were most influential to LC groups also, even though they were less influenced than HC groups. In conclusion, the fashion conformity and innovativeness were found to exist in different dimensions consisting dual structure. Thus, retailers and marketers can make their strategies more successfully if they use these two characteristics separately when segmenting consumers.

• Journal of Korean Society of Rural Planning
• /
• v.1 no.1
• /
• pp.99-110
• /
• 1995

이 연구는 한국 쌀생산의 효율성을 경영규모별로 파악하고, 영농규모 확대를 통한 쌀생산의 효율성 중대 가 가능하다는 가설을 검정해 보고자 하였다. 이 분석에 필요한 기술적 선도농가들의 생산함수인 프런티어(frontier) 생산함수를 구하기 위해서는 교 란항의 정보를 이용할 수 있는 확률(stochastic) 모형아 바람직하고, 아울러 경영규모별로 규모의 효율성을 파악하기 위해서는 레이 동조(ray-homothetic) 함수가 적절하다. 따라서 여기에서는 농림수산부의 1992년도 쌀생산비 자료에서 임의로 추출한 1,203호의 표본 자료를 이용해 앞에서 언급한 두가지 요소를 동시에 감안 할 수 있는 $\ulcorner$레이 동조 확률 생산함수(ray-homothetic stochastic production function)$\lrcorner$를 최우추정법 (Maximum likelilood estimation method)으로 추정하였으며, 이를 토대로 쌀생산의 경영규모별 비효율성 을 순수 기술적 비효율성과 규모의 비효율성으로 나누어 계측하였다. 게측결과에 의하면 쌀생산의 비효율성은 굉균 35.loyo에 이르고 있다. 이 가운데 순수 기술적 비효율성은 12.0%이고, 규모의 비효율성은 24.l%에 달했다. 기술적 비효율성과 규모의 비효율성 모두 경지규모 확대와 더불어 감소하는 것으로 나타나, 경영규모 확대와 더불어 미곡생산의 효율성이 증대될 수 있다는 가설은 기 각되지 않았다. 그러나 대농의 경우에도 규모의 비효율성이 여전히 높은 것으로 나타나 영농규모 확대를 저 해하는 제도적 장벽이 아직도 높다는 것을 알 수 있다. 아울러 대농과 소농과의 효율성 격차가 현저하지는 않은 것으로 나타나 단순히 경지를 중심으로 한 경영규모 확대만으로는 효율성 제고에 한계가 있음을 보여 주고 있다. 이 연구의 결과는 다음과 같은 정책적 함의를 가지고 있다. 첫째, 한국 미곡생산의 효율성 중대 잠재력이 결코 과소 평가되어서는 안된다. 둘째, 영농규모 확대가 쌀생산의 효율성 증대를 위해 필요한 것은 사실이지 만 단순한 경지규모의 확대에 치중하는 것보다 영농규모 확대를 저해하는 제도적 기술적 장애요인을 제거해 나가는 것이 더욱 중요하다. 마지막으로, 새로운 영농기술의 개발은 물론이고 현행 선진영농기술의 보급도 쌀생산의 효율성 중대에 상당한 역할을 할 수 있다는 사실이 간과되어서는 안된다.

• The Korean Journal of Financial Studies
• /
• v.13 no.1
• /
• pp.77-92
• /
• 2007

한국증권시장을 포함한 대부분의 지역증권시장이 미국 뉴욕증권시장의 움직임에 반응하거나 동조현상을 보인다는 사실은 이미 경험적으로 혹은 통계적으로 널리 수용되고 있다. 본 연구는 그러한 반응에 비선형성이 존재하는가를 일별 주가수익률을 데이터로 활용하여 우선적으로 검정한다. 그러한 검정결과에 입각하여 비선형성을 내재화시킨 계량분석모형이 주가수익률을 설명하고 예측하는데 도움을 줄 수 있는가를 확인한다. 본 연구에서는 이러한 비선형성에 관련된 정보를 유도하기 위하여 평활전이(자기)회귀분석모형(STR)을 이용한다. STR모형은 국면전환을 야기하는 전이변수를 명시적으로 확인할 수 있고 다양한 국면전환형태를 모형에 수용할 수 있는 장점을 가지고 있다. KOSPI수익률의 비선형성에 대한 검정결과는 귀무가설인 선형성이 기각되는 것으로 나타났으며, 그러한 비선형성의 형태는 미국증권시장이 하강기에 처한 경우에 상승기에 처한 상태보다 민감한 동조현상을 보이는 것으로 나타났다. 하지만 추정된 STR모형이 주가의 변동을 설명하거나 예측하는데 여타의 모형보다 나은 능력을 가지는가에 대해서는 긍정적인 결과를 얻지 못하였다.

• The Korean Journal of Applied Statistics
• /
• v.24 no.2
• /
• pp.239-251
• /
• 2011

The need for statistical analysis to discern the existence and the type of international business comovement has increased as business and economic variations in one country is directly transmitted to business and financial market conditions in another without a long lag. This study performs the statistical tests for th locomotive hypothesis to understand the structural character of the long-run mechanism among Korea-US current and future business movements and the domestic stock market. The U.S. future business prospect, rather than the US current and the domestic current and future business conditions, appears to signi cantl a ect the domestic stock market movement.