• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.5
• /
• pp.179-186
• /
• 2010

When a structure is damaged, its dynamic responses (natural frequency, acceleration, strain) are found to be changed. The ANN(Artificial Neural Network) damage-assesment method is that some measured dynamic signals from the structural changing dynamic responses are applied to ANN to assess the structural damage. Although there have been some studies on a certain typical cases so far, it is rare to find studies about the characteristics of the ANN damage-assesment method or about its applicability, its strength and weakness. So this study researches on the characteristics of ANN damage assesment method and on a problem in application of the various dynamic responses to ANN. What the ANN damage assessment method usually does in past researches is to teach an ANN by using some response signals obtained from damaged structures under one kind of excitations and to identify the locations and the extents of damage of same structures under the same excitations. However, the excitations inflicted on the structures are not always the same. Thus this study experiments whether a ANN which is trained using the same excitations is able to identify the damage when different excitations inflict. All response signals are obtained from experimental models.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1487-1494
• /
• 1990

In this paper the dynamic characteristics of self acting air lubricated slider bearing of hard disk/head system are investigated. The dynamic equations of magnetic head mechanism considering both parallel and pitch motion and the time dependent modified Reynolds equation are analyzed and the dynamic pressure distribution of air film is numerically calculated in frequency domain by small perturbation method and finite difference scheme with variable grid. The dynamic response of the slider spacing is obtained accordingly as the moving recording surface vibrates in parallel mode.

• Journal of KSNVE
• /
• v.7 no.4
• /
• pp.655-661
• /
• 1997

Base-isolation of a primary structure generally decrete the seismic response of its own and the secondary structure. It may cause an adverse effect on the seismic response of secondary system when the system is submerged and subject to a considerable hydrodynamic effect. In this paper, it is shown how, and how much, the base isolation of the primary structure can affect the secondary system response in extreme cases through dynamic analysis of a simplified coupled model for a submerged secondary system and a base-isolated primary structure. As an aseismatic design approach to reduce the response of the submerged system, optimization of the fluid gap, which controls the hydrodynamic mass effect, is performed. As an alternative approach in case where the control of fluid gap is unrealistic, application of base isolation to the submerged system is suggested. Effectiveness of various combinations of the primary base and secondary base isolations are compared.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.225-231
• /
• 1997

The dynamic characteristics of Control Element Drive Mechanism(CEDM) for Korea Standard Nuclear Power Plant are studied with the CEDM modeled as a secondary mass in a simplified two degree of freedom system, while the reactor vessel as a primary mass. The optimal .mu.-f curve is developed to reduce the response amplitudes of both primary and secondary masses. In order to improve a design it is proposed that the natural frequency ratio, f, should be converged to 0.93, the mass ratio, .mu., should not be reduced, and the result should be converged to the optimal .mu.-f curve. Optimal design for CEDM components has been carried out and the response amplitude ratios of reactor are reduced 10.5 - 19.7% while those of CEDM are reduced 6.3 - 3.4%.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.55-58
• /
• 1992

일반적으로 기계계 또는 기계요소가 외력을 받아 진동할 때 공진이 문제시 되는 경우가 많다. 이러한 계의 공진 제어에는 주로 댐핑재료(damping material)의 사용이 일반화 되어왔다. 그러나 댐핑재료를 사용한 제어에 있어 서는 계의 특성이나 규모등에 따라 많은 제한요소가 따르는데 특히 구조물 의 규모가 커지거나 복잡해지면, 제어 위치선정에도 어려움이 따르며 그 효 과도 기대하기 어렵다. 다른 방법으로는 기계계의 동적 특성치에 변화를 주 는 것이나, 이를 허용하지 않는 계가 많다. 따라서 이러한 단점들을 보완하 기 위해서 고안된 것이 동흡진기(dynamic absorber)이다. 기존의 선형 동흡 진기[1]는 주공진 부근영역에서 가진되는 계에만 적용이 가능하기 때문에, 흡진기와 기계계의 크기비(ratio)의 결정이 제한적이다. 이런 제한을 극복하 여 비교적 넓은 범위의 가진 주파수에 대해서 최대의 응답을 최소화하기 위 해서는 비선형 동흡진기[5]의 해석이 요구되고 있다. 제어대상의 최적응답을 얻기 위해 흡진기의 크기를 변화시키는 과정을 tuning이라 하는데, 이 과정 을 통해 최적의 감쇠값을 결정할 수 있다. 비선형 흡진기의 장점은 tuning 과정시 비선형 파라미터 변화에 의해 제어가 가능한 영역을 확장할 수 있다. 따라서 본 연구에서는 동흡진기의 tuning 과정시 흡진기의 크기비와 비선형 파라미터비에 따른 효과를 정규모우드를 활용하여 고찰한 후, 최적의 응답을 통해 비선형 동흡진기의 동적 거동을 연구하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.201-204
• /
• 2004

In this study, the GSP and in-house numerical codes have been used for analyses of the on-design, static off-design and dynamic off-design performances. Through the various missions including altitude, velocity, and power variations static engine performance have been investigated. The dynamic engine performances based on these complicated variations have been also analysed. Especially, the power, engine rpm and heat overload characteristics of a turbine have been estimated with the response time through the control of a throttle setting rather than a power setting. It could be applied to the FADEC system as an engine control device.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.2
• /
• pp.17-24
• /
• 2005

In this study, the GSP and in-house numerical codes have been used for analyses of the on-design, static off-design and dynamic off-design performances. Through the various missions including altitude, velocity, and power variations the static engine performance have been investigated. The dynamic engine performances based on these complicated variations have been also analyzed. Especially, the power, engine rpm and heat overload characteristics of the turbine have been estimated with the response time through the control of the throttle setting rather than the power setting. It could be applied to the FADEC system as an engine control device.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.3
• /
• pp.218-224
• /
• 2011

A modal method is presented for the investigation of the effects of measurement errors in damage detection for dynamic structural systems. The structural modifications to the baseline system result in the response changes of the perturbed structure, which are measured to determine a unique system in the inverse problem of damage detection. If the numerical modal data are exact, mathematical programming techniques can be applied to obtain the accurate structural changes. In practice, however, the associated measurement errors are unavoidable, to some extent, and cause significant deviations from the correct perturbed system because of the intrinsic instability of eigenvalue problem. Hence, a self-equilibrating inverse system is allowed to drift in the close neighborhood of the measured data. A numerical example shows that iterative procedures can be used to search for the damaged structural elements. A small set of selected degrees of freedom is employed for practical applicability and computational efficiency.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.2
• /
• pp.83-93
• /
• 2004

In this study. the Modified Response Displacement Method(MRDM) for seismic design of underground box-type structures is proposed. Firstly, to investigate the applicability of the conventional RDM, various parametric studies are performed according to buried depth and soil conditions. Results from the conventional RDM are compared with those of time history analysis in terms of the maximum bending moment and relative displacement. The comparison shows that the velocity response spectrum and the determination method of foundation modulus which significantly influence the accuracy of RDM should be modified. Thus, the modified velocity response spectrum and the new determination method of foundation modulus are proposed under consideration of domestic conditions. In order to demonstrate the accuracy and validity of the proposed MRDM numerical analyses are performed according to different parameters such as depth of base rock, height and width of box, buried depth and soil condition. the comparison with the results of the time history analysis verifies the feasibility of the proposed MRDM for the seismic analysis.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.119-120
• /
• 2008

본 논문은 배전계통에서 사용되고 있는 유도 원판형 과전류 계전기를 EMTP(ElectroMagnetic Transients Program)을 이용하여 모델링 하였다. EMTP 내의 TACS 소자는 동적 응답 특성을 모델링 할 수 있는 소자로 유도 원판형 계전기의 동적 응답 특성을 모델링하는데 사용되었다. 계전기의 순시동작 및 한시동작 특성은 한국전력공사 과전류 계전기 표준규격에 근거하여 모델링하였으며, 순시동작 및 한시동작 (반한시, 강반한시) 특성을 모두 모델링하였다. 또한 한국전력공사 실 배전계통에 투입하여 고장 발생 시 계전기 동작을 관찰함으로써 모델링한 계전기의 동작을 검증하였다.