• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1A
• /
• pp.30-37
• /
• 2006

In this paper, we propose a QoS-aware efficient bandwidth re-provisioning scheme in a next generation wireless packet transport network. At the transport network layer, it classifies the traffic of the radio network layer into a real time class and a non-real time class. Using an auto-regressive time-series model and a given packet loss probability, our scheme predicts the needed bandwidth of the non-real time class at every re-provisioning interval. Our scheme increases the system capacity by releasing the unutilized bandwidth of the non-real time traffic class for the real-time traffic class while insuring a controllable upper bound on the packet loss probability of a non-real time traffic class. Through empirical evaluations using the real Internet traffic traces, our scheme is validated that it can increase the bandwidth efficiency while guaranteeing the quality of service requirements of the non-real time traffic class.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.3
• /
• pp.457-469
• /
• 1997

A nuclear spent fuel shipping cask is required by IAEA and domestic regulations to withstand a 9m free drop condition. In this paper, the structural analysis under the 9m side drop condition was performed to understand the dynamic impact behavior and to evaluate the safety of the cask for 7 PWR nuclear spent fuel assemblies. The analysis result was compared with the measured value of the 9m side drop test for the 1/3 scaled-down model and the accuracy of the 3D analysis was confirmed. Analysis in accordance with the diameter of impact limiters for the proto-type cask were performed. Through the analysis, the impact behaviors due to the side drop and the effects dependent on the diameter of impact limiters were grasped. Maximum stress intensities on each part of the cask were respectively calculated by using the stress evaluation program and the structural safety of the cask was finally evaluated in accordance with the regulations.

• Composites Research
• /
• v.28 no.2
• /
• pp.58-64
• /
• 2015

The purpose of this paper is to suggest the effective equivalent finite element model for the impact limiter of a nuclear spent fuel shipping cask made of sandwich composite panels. The sandwich composite panels were composed of a metallic facesheet and a core material made of urethane foam, balsa wood and red wood, respectively. The effective equivalent finite element model for the impact limiter was proposed by comparing the results of low-velocity impact test of sandwich panels. An explicit finite element analysis based on LS-DYNA 3D was done in this study. The results showed that the solid elements were recommended to model the facesheet and core of sandwich panels for impact limiter compared to combination modeling method, in which the layered shell element for facesheet and solid element for core material are used. In particular, the solid element for balsa and red wood core materials should be modeled by the element elimination approach.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.3
• /
• pp.20-33
• /
• 2006

Because of rapid expansion of third party logistics, fierce competition in the transportation industry, and the diversification and globalization of transportation channels, an effective transportation planning by means of multimodal transport is badly needed. Accordingly, this study aims to suggest an optimal transport algorithm for the multimodal transport in the international logistics. As a solution for this problem, first of all, we have applied a pruning algorithm to simplify it, suggesting a heuristic algorithm for constrained shortest path problem to find out a feasible area with an effective time range, which has been applied to the Label Setting Algorithm, consequently leading to multiple Pareto optimal solutions. Also, in order to test the efficiency of the algorithm for constrained shortest path problem, this paper has applied it to the actual transportation path from Busan port of Korea to Rotterdam port of Netherlands.

• Journal of Life Science
• /
• v.31 no.2
• /
• pp.219-222
• /
• 2021

In this study, we examined low molecular weight peptides using proteomics in order to identify their original proteins, derive their peptides, and determine the functions of the proteins in Tenebrio molitor, the mealworm (larvae, pupae, or adult) from which the peptides were extracted. Fifty-four proteins were finally identified through an analysis of proteome to derive the analyzed peptides. The proteins that induced low molecular weight peptides were identified to be the most abundant in adults only, and the next highest were derived from a group containing both adults and larva. However, other groups, including pupa, were detected to have a lower frequency of peptides. As a result of orthologous classification of the detected proteins, the general function prediction was only investigated at the highest frequency among the examined proteins. Proteins related to chromatin structure and dynamics were detected by their higher frequency among functional classes. The next highest frequency was shown by proteins related to amino acid transport and metabolism and carbohydrate transport and metabolism. Therefore, it is assumed that proteins correlated with chromatin, amino acid, and carbohydrate metabolisms are easily induced into low molecular weight peptides, and that their peptides could play a role as bioactive substances.

• Environmental and Resource Economics Review
• /
• v.22 no.2
• /
• pp.393-410
• /
• 2013

We employ a threshold vector error correction models (TVECM) to investigate the nonlinear dynamic adjustment of gasoline prices in Korea. We consider 10 regional gasoline markets including Seoul, Busan, Daegu, Incheon, Kwangju, Daejeon, Ulsan, Kangwon, Chungbuk, Jeonbuk and construct 9 price differences against Seoul. We use the bootstrap procedure suggested by Hansen (1999) and generalized by Lo and Zivot (2001) to show that three-regime TVECM is suitable for our analysis. Results indicate the gasoline price adjustment processes are nonlinear. Our estimation shows that Seoul-Daejeon, Seoul-Daegu and Seoul-Ulsan have bigger transaction costs than other market pairs and thus gasoline prices of these three regional markets are lower than that of Seoul. Gasoline prices of the other 6 regional markets are close to Seoul's price. One interesting finding is that the transaction costs are not proportional to geographical distances. This implies that transportation costs are not the main factor of the transaction costs. The transaction costs may depends on the competition intensity of gasoline markets in supply side.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.2
• /
• pp.50-57
• /
• 2023

Autonomous driving technologies have been gradually improved for road traffic owing to the development of artificial intelligence. Since the truck platooning is beneficial in terms of the associated transporting expenses, the Connected-Automated Vehicle technology is rapidly evolving. The structural performance is, however, rarely investigated to capture the effect of truck platooning on civil infrastructures.In this study, the dynamic behavior of bridges under truck platooning was investigated, and the amplification factor of responses was estimated considering several parameters associated with the driving conditions. Artificial intelligence techniques were used to estimate the maximum response of the mid span of a bridge as the platooning vehicles passing, and the importance of the parameters was evaluated. The most suitable algorithm was selected by evaluating the consistency of the estimated displacement.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.792-795
• /
• 2008

AGT system is a kind of light railway train. AGT system use of concrete track and rubber tire, so it can be reduce the noise and vibration, compare to the normal train system. And, the dynamic responses of normal bridge are influenced by the dynamic characteristics of bridge, the speed of vehicle and the surface roughness of railway. But the AGT system bridge is influenced not only the above facts but also the guiderail unevenness, because, AGT vehicle steered by guiderail. So, in this study, optimized service condition is suggested for the design and operation of AGT system, by the means of experimental study. The experiments are executed for PSC bridge with length of 30m, at the AGT test line in Kyongsan. The test results are compared and investigated according to the prominence. In the test result, the guiderail prominence influenced on the dynamic response of bridge. It shows a increase as compared with no guiderail prominence in the dynamic response value acceleration, displacement, stain.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2001.10a
• /
• pp.139-142
• /
• 2001

This study suggests an approach for determining fleet size for container road transportation with dynamic demand in Korea. With the forecasted monthly container transportation data a year, a heuristic algorithm is developed to determine the number of company-owned trucks, mandated trucks, and rented trucks in order to minimize the expected annual operating cost, which is based on the solution technologies used in the aggregate production planning and the pickup-and-delivery problem. Finally the algorithm is tested for the problem how the trucking company determines the fleet size for transporting containers.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.61-64
• /
• 2000

This paper analyzes a dynamic lot-sizing problem, in which the order size of multiple products and a single container type are simultaneously considered. In the problem, each order (product) placed in a period is immediately shipped immediately by containers in the period and the total freight cost is proportional to the number of each container type employed. Also, it is assumed that backlogging is not allowed. The objective of this study is to determine the lot-sizes and the shipping policy that minimizes the total costs, which consist of ordering costs, inventory holding costs, and freight costs. Because this problem is NP-hard, we propose a heuristic algorithm with an adjustment mechanism, based on the optimal solution properties. The computational results from a set of simulation experiment are also presented.