• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.464-464
• /
• 2018

최근 풍수해 현황 분석(국민안전처, 2016)에서는 2003년 이후 태풍 루사와 매미와 같은 대형태풍이 최근에 발생하지 않아 대부분 하천급류로 인한 인명피해가 대부분이라고 언급하였다. 최근 풍수해로 인한 피해가 발생하지는 않았지만 호우/태풍이 발생할 경우 인명보호와 불편해소를 최우선에 두고 각종 정책들을 선제적으로 추진하고 있어 홍수범람발생 예상지역에 대한 인명피해 분석은 반드시 필요하다고 판단된다. 최근들어 인명피해를 평가하는 기술은 피해자료로부터 비교적 간단히 분석되는 경험적 방법에서 2차원 동적 수리모형과 연계, 그리고 정밀한 인구, 건물 등의 자료를 활용하여 대피율, 사전경보 등 인명피해에 영향을 미치는 다양한 요소를 복합적으로 고려하고 개념적이고 기계적 방법으로 발전하는 추세이다. 우리나라의 경우 인명피해 평가와 관련한 연구사례가 거의 전무한 상태이고, 치수경제성분석에서 제시하는 침수면적에 기반한 간략한 방법만이 실무에서 활용되고 있다. 최근 국외에서 제시한 접근방법은 본 연구에서의 개발하고자 하는 목적과 방향에 부합하지 않다고 판단되며, 국내 실정을 고려할 때 주요 영향인자를 추가하고, 특히 노출인구, 인명 인벤토리의 해상도를 높이는 데 주안점을 두고자 한다. 홍수로 인한 인명피해 발생확률은 사후분석의 일환으로 침수흔적도를 통해 총 2개의 침수구간을 설정한 후 Census data를 활용한 위험인구(Population at Risk, PAR)를 산정한후, NDMS 인명피해 자료를 활용하여 침수구간별 인명피해 발생확률을 제시하였다. 여기서 제시한 침수구간의 경우 데이터의 축적정도에 따라 구간을 세밀화 할 수 있는데, 본 연구에서는 총 2개구간(0-1m, 1m 이상)으로 계략화 하여 제시하였다. 본 연구에서는 4개의 지자체의 인명피해 자료를 통해 인명피해 발생확률을 산정하였으며, 해당내용을 시범유역의 빈도별 침수구역도에 적용하여 인명피해 발생을 분석하였다. 해당 연구결과의 경우 인명피해에 대한 명확한 결과를 유추하는데에는 한계가 있지만, 인명피해에 기반한 해당지역의 장래피해규모를 예측하는 데에는 기초가 될 수 있을 것으로 판단된다.

• International Area Studies Review
• /
• 제22권1호
• /
• pp.41-60
• /
• 2018

It is widely known that the increased productivity lead to a decrease in energy consumption. The policy for reducing energy consumption is also focusing on the improvement of firm's productivity. However, the issue of productivity dilemma phenomenon is recently raised in various fields. It is phenomenon that the increased productivity rather lead to a increased in energy consumption through a rise in output. This paper analyzed the presence of productivity dilemma in korean firm using Tang et al(2015)'s theoretical model. To closely analyze, I performed the analysis using 715 firms during 2011-2015 and estimated the model using system GMM to minimize the endogeneity. The results show that total effect of productivity had a significantly negative coefficient. It is implies that the increased productivity doesn't increase energy consumption. In other word, this paper could not identified productivity dilemma and so did in overseas investment firm and national firm cases.

• Journal of Ocean Engineering and Technology
• /
• 제33권2호
• /
• pp.116-122
• /
• 2019

Among the various wave power systems, Salter's duck (rotor) is one of the most effective wave absorbers for extracting wave energy. The rotor shape is designed such that the front part faces the direction of the incident wave, which forces it to bob up and down due to wave-induced water particle motion, whereas the rear part, which is mostly circular in shape, reflects no waves. The asymmetric geometric shape of the duck makes it absorb energy efficiently. In the present study, the rotor was investigated using WAMIT (a program based on the linear potential flow theory in three-dimensional diffraction/radiation analyses) in the frequency domain and verified using OrcaFlex (design and analysis program of marine system) in the time domain. Then, an experimental investigation was conducted to assess the performance of the rotor motion based on the model scale in a two-dimensional (2D) wave tank. Initially, a free decay test (FDT) was carried out to obtain the viscous damping coefficient. The pitch response was extracted from the experimental time series in a periodic regular wave for two different wave heights (1 cm and 3 cm). In addition, the viscous damping coefficient was calculated from the FDT result and fluid forces, obtained from WAMIT, are incorporated into the final response of the rotor. Finally, a comparative study based on experimental and numerical results (WAMIT & OrcaFlex) was performed to confirm the performance reliability of the designed rotor.

• Journal of Convergence for Information Technology
• /
• 제12권4호
• /
• pp.345-353
• /
• 2022

The purpose of this study is to identify the types for open innovation of SMEs considering strategic- culture mixed typology and environmental dynamism. The analysis results of 182 SMEs classified into 4 groups are as follows. First, type PD had a positive effect on innovation performance in both in-bound and out-bound innovation and had improved performance through in-bound innovation in a dynamic technical environment. While DH had no significant effect on both innovations. Second, PH and DD, strategy-culture mismatched types, had a single effect of innovation that affected performance. No moderating effects of environmental dynamism had been shown in types PH, DD, DH. SMEs that aim for open innovation should strive to improve performance by aligning change-oriented strategy with creative and challenging culture.

• Journal of Broadcast Engineering
• /
• 제27권5호
• /
• pp.751-761
• /
• 2022

With the development of digital graphics technology, the metaverse has become a significant trend in the content market. The demand for technology that generates high-quality 3D (dimension) models is rapidly increasing. Accordingly, various technical attempts are being made to create high-quality 3D virtual humans represented by digital humans. 3D volumetric capture is spotlighted as a technology that can create a 3D manikin faster and more precisely than the existing 3D model creation method. In this study, we try to analyze 3D high-precision facial production technology based on practical cases of the difficulties in content production and technologies applied in volumetric 3D and 4D model creation. Based on the actual model implementation case through 3D volumetric capture, we considered techniques for 3D virtual human face production and producted a new metahuman using a graphics pipeline for an efficient human facial generation.

• Journal of the Earthquake Engineering Society of Korea
• /
• 제27권5호
• /
• pp.193-202
• /
• 2023

In this paper, a dynamic centrifuge model test was conducted on a 24.8-meter-deep excavation consisting of a 20 m sand layer and 4.8 m bedrock, classified as S3 by Korean seismic design code KDS 17 10 00. A braced excavation wall supports the hole. From the results, the mechanism of seismically induced earth pressure was investigated, and their distribution and loading points were analyzed. During earthquake loadings, active seismic earth pressure decreases from the at-rest earth pressure since the backfill laterally expands at the movement of the wall toward the active direction. Yet, the passive seismic earth pressure increases from the at-rest earth pressure since the backfill pushes to the wall and laterally compresses at it, moving toward a passive direction and returning to the initial position. The seismic earth pressure distribution shows a half-diamond distribution in the dense sand and a uniform distribution in loose sand. The loading point of dynamic thrust corresponding with seismic earth pressure is at the center of the soil backfill. The dynamic thrust increased differently depending on the backfill's relative density and input motion type. Still, in general, the dynamic thrust increased rapidly when the maximum horizontal displacement of the wall exceeded 0.05 H%.

• Journal of the Korean Geotechnical Society
• /
• 제26권12호
• /
• pp.61-70
• /
• 2010

A series of shaking table tests were conducted to estimate the seismic performance of soft ground deposits improved by stone column. The amplification of acceleration, shear strain, and shear wave velocity were evaluated to compare the seismic response of unimproved ground deposits with that of improved ground deposits. From the test results, it was shown that the stone column can prevent large shear deformation in ground deposits. However, it was also found that the acceleration of improved ground deposits may be amplified more than that of unimproved ground deposits when it was subjected to short periodic seismic wave. The results suggest that it is necessary to perform the ground response analysis with model experiments for both unimproved and improved ground deposits to evaluate the effect of stone column on the seismic performance of improved ground deposits.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.348-348
• /
• 2020

우리나라 하구에 조성된 담수호의 수자원은 다양한 용수 목적에 맞게 활용하고 있으며, 수질 기준에 부합하는 용수를 공급하고 담수호 및 간척지의 친환경적 가치를 높이기 위해서는 담수호의 상류 유역 및 유입 오염물질, 그리고 담수호 수체 특성에 대한 종합적인 이해를 기반으로 수질 오염 관리 대책을 수립하는 것이 중요하다. 일반적으로 담수호 개선을 위한 방안의 선정 방식은 연평균 수질 농도를 기준으로 목표하고자 하는 수질 기준의 만족 여부에 대한 평가와 경제적 평가를 함께 고려하여 최적의사결정 기반으로 주로 이루어져 왔다. 그러나 기존의 평가 방법에서는 목표 수질의 만족 여부가 중요하다는 점에서 담수호 수자원의 시기별 활용성에 대한 고려를 간과하기 쉽다. 또한 담수호 수자원 시스템의 수질 악화에 대한 회복탄력성을 높이는 일은 단순히 유역관리대책의 적용에 따른 수질 개선 문제와는 별도로 담수호 수자원 시스템의 지속 가능성과 연관된다는 점에서 기존의 평가 방식을 보완하기 위한 수단이 필요하다고 할 수 있다. 따라서 본 연구에서는 담수호 수자원 관리 방안을 평가하는 데 있어서 회복탄력성의 개념을 활용하였으며, 각 방안에 대한 시간적 변화에 따른 담수호의 회복탄력성 특징을 고려하기 위하여 동적 회복탄력성 개념 및 평가 방법을 도입하였다. 본 연구에서는 우선 기존의 수질 평가 방법에 따라 간월호를 대상으로 수질 개선 방안별 수질 변화를 SWAT-EFDC 연계모형을 통해 모의하고, 연평균 수질 농도와 총인 삭감량에 대해 분석하였다. 분석 결과, 간월호의 지형학적 특성에 따라 간월호 상류 구간의 수질 농도가 다른 구간에 비해 높게 나타났으며, 상류 구역의 경우 준설 시나리오만으로는 목표 수질을 달성하기 어려운 것으로 나타났다. 따라서, 상류 구역의 수질 목표 달성을 위해서는 준설 시나리오만으로는 한계가 있으므로 상류 유역 출구부에 위치한 하수처리시설의 총인 배출부하량을 삭감과 추가적인 유역 수질 관리 대책이 필요하다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제30권2A호
• /
• pp.149-159
• /
• 2010

This paper presents an experimental study on the structural behavior of composite CFT truss girder bridge with full depth precast panels. The length of span is 20,000 mm. The CFT truss girder is a tubular truss composed of chord members made of concrete-filled and hollow circular tubes. To determine fundamental structural characteristics such as the strength and deformation properties of composite CFT truss girder bridge, static and dynamic tests were conducted. The natural frequencies calculated by the FEM are in good agreement with experimental results obtained from dynamic test. Bracing have only a small effect on the natural frequencies of composite CFT truss girder bridge as indicated by the FEM results. The yield strength and deformation of the composite CFT truss girder bridges were investigated through a static bending test. Besides, the test results showed that uniform distribution of shear connectors can be applicable in composite CFT truss girder bridges.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제13권4호통권56호
• /
• pp.137-147
• /
• 2009

In this study, several flexural vibration characteristics of prestressed concrete girders due to changes in prestress forces are experimentally analyzed. In order to achieve the objective, the following approaches are implemented. First, several methods to extract vibration response features from output-only signal are selected. Next, a large-scaled prestressed concrete girder model is constructed to analyze relation between the prestress forces and the vibration features in the prestressed concrete girder. Then acceleration responses are measured from the girder for several prestress force scenarios. Finally, vibration characteristics of the prestressed concrete girder due to change in prestress force are experimentally analyzed. The values of features extracted by the selected methods are reduced due to prestress-loss. Especially, the value of features are linearly reduced in the early prestress-loss.