• Tunnel and Underground Space
• /
• 제16권1호
• /
• pp.58-72
• /
• 2006

In recent years, not only the occurrences but the magnitude of earthquakes in Korea are on an increasing trend and other sources of dynamic events including large-scale construction, operation of hi띤-speed railway and explosives blasting have been increasing. Besides, the probability of exposure fir rock joints to free faces gets higher as the scale of rock mass structures becomes larger. For that reason, the frictional behavior of rock joints under dynamic conditions needs to be investigated. In this study, a shaking table test system was set up and a series of dynamic test was carried out to examine the dynamic frictional behavior of rock joints. In addition, a computer program was developed, which calculated the acceleration and deformation of the sliding block theoretically based on Newmark sliding block procedure. The static friction angle was back-calculated by measuring yield acceleration at the onset of slide. The dynamic friction angle was estimated by closely approximating the experimental results to the program-simulated responses. As a result of dynamic testing, the static friction angle at the onset of slide as well as the dynamic friction angle during sliding were estimated to be significantly lower than tilt angle. The difference between the tilt angle and the static friction angle was $4.5\~8.2^{\circ}$ and the difference between the tilt angle and the dynamic friction angle was $2.0\~7.5^{\circ}$. The decreasing trend was influenced by the magnitude of the base acceleration and inclination angle. A DEM program was used to simulate the shaking table test and the result well simulated the experimental behavior. Friction angles obtained by shaking table test were significantly lower than basic friction angle by direct shear test.

• Journal of Advanced Navigation Technology
• /
• 제15권3호
• /
• pp.441-448
• /
• 2011

It is very important that establishing the valve train equations and representing the behavior of the valve train parts. To maintain the specific efficiency of running engine, the cam profile of valve train has more specific influence on the adequate behavior of the valve train than a valve clearance, heat-resistance and durability of parts. The polynomial cam, the multipol cam and polydyne cam profie are widely used to represent cam behaviour. In this study, using polydyne cam design profile equations which is more adequate for representing high speed engine, the geometrical modeling and mathmatical variable analysis are established to analysis the valve behaviour.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제25권3호
• /
• pp.1-12
• /
• 2021

The purpose of this paper is to study of the applicability of the current response spectrum analysis method by grasping the dynamic behavior characteristics of soil-pile and pier-crane in pile mooring facilities. To this end, time history analysis was performed using Abaqus as a design variable for various soil types, pile-ground modeling, and structure specific cycles. The results were compared with the analysis results of the response spectrum. Subsequently, a problem has been found in the current response spectrum analysis and the improvements are needed when considering the dynamic behavior of the ground-pile and pier-crane of the pile mooring facility.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• 제12권3호
• /
• pp.281-292
• /
• 1999

지반-기초 상호작용계를 해석할 때 실제로 지반은 다양한 지반종류와 다층으로 형성되어 있으므로 지반 특성의 변화를 고려해야 한다. 초기의 대부분의 상호작용계의 정·동적 해석은 지반의 복잡한 성질을 역학적으로 탄성거동을 한다고 가정한 Winkler 지반모델 혹은 지반을 등방성이고 균질한 반무한 탄성체로 가정한 반무한 탄성지반 모델로 보아 수행되었다. 본 연구는 유한 요소법을 이용하여 지반-기초 상호작용계의 동적 거동을 해석하기 위해 기초는 4절점 후판요소를 사용하고 지반은 지반특성을 고려할 수 있도록 8절점 6면체 요소를 사용하였고, 지반의 감쇠효과 및 지반특성을 고려한 지반-기초 상호작용계의 동적 거동을 유한요소법으로 해석하고 지반의 영향범위를 결정하는 것이다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 1994년도 추계학술대회논문집; 한국종합전시장, 18 Nov. 1994
• /
• pp.58-61
• /
• 1994

본 연구에서는 내부 외부 진동원(8-30Hz)에 따른 격자보 구조의 동적 응답을 효과적으로 제어하기 위해 격자보 구조의 동적 거동에 지배적인 영향을 미치는 철근비, 질량, 탄성계수 등 여러 인자들의 비교, 분석을 통해 동적 거동에 영향을 미치는 인자를 분석함으로써 격자보 구조의 설계시 인자의 변화에 따른 동적 거동 특성을 예측하여 이에 적절히 대응할 수 있도록 도모하였다. 이를 위해 국내에 건설된 반도체 공장의 격자보 구조 중에서 기본 해석 모델을 결정하고 이에 대해 실험적 모드 해석과 유한 요소 해석을 사용해서 기본 해석 모델의 모드 매개변수를 구하고, 기본 해석 모델에 사용되는 각 인자가 고유 진동수에 미치는 영향을 비교.분석하였다.

• Journal of the Earthquake Engineering Society of Korea
• /
• 제7권5호
• /
• pp.47-56
• /
• 2003

In this paper, the cyclic soil behavior model. which can accommodate the cyclic hardening, was developed by modifying the original parallel IWAN model. In order to consider the irrecoverable plastic strain of soil. the cyclic threshold strain, above which the backbone curve deviates from the original curve, was defined and the accumulated strain was determined by summation of the strains above the cyclic threshold in the stress-strain curve with applying Masing rule on unloading and reloading curves. The isotropic hardening elements are attached to the original parallel IWAN model and the slip stresses in the isotropic hardening elements are shown to increase according to the hardening functions. The hardening functions have a single parameter to account for the cyclic hardening and are defined by the symmetric limit cyclic loading test in forms of accumulated shear strain. The model development procedures are included in this paper and the verifications of developed model are discussed in the companion paper.

• The Korean Journal of Rheology
• /
• 제9권4호
• /
• pp.163-173
• /
• 1997

Polystyrene/polycarbonate 조성이 약 50/50인 3종류의 Poly(carbonate-g-styrene) 공중합체의 동적 탄성율, E*($\omega$)와 동적 스트레인-광학계수 O*($\omega$)을 유리전이 영역부근의 여러온도에서 동시에 측정하여 연구하였다. 두 개의 공중합체는 각각의 스티렌 그라프트쇄 에 5, 10 wt%의 MAH를 함유하고 있다. 이들 공중합체의 E*($\omega$)와 O*($\omega$)완화거동과 그라 프트 공중합체의 상용성과 연관하여 비교 고찰하였다. 공중합체들의 E*($\omega$)는 전형적인 무 정형 고분자의 유리전이 완하거동을 보였으며 정성적인 차이를 발견할수 없었다. 그러나 고 강도의 단일 tan$\delta$분산의 저주파수 영역에 미세분산을 나타내, 공중합체는 2상으로 분리되 어 있음이 추정되엇다. 폴리스티렌 그라프트체에 무수 말레인산 함유량이 증가함에 따라, 저 주파수 영역의 미세피크가 $\alpha$주분산에 병합되어 성분 고분자간의 상호 형동성이 증가함을 알수 있었다. 3공중합체의 유사한 기계적 특성과는 달리, 광학적 완화 스펙트럼 O*($\omega$)는 정 성적으로 명확한 차이를 보여 공중합체들의 광학완화 거동이 명확히 다름을 나타냈다. 기계 적 특성보다는 광학적 특성이 공중합체내의 성분 고분자의 미세한 완하 거동에 훨씬 민감한 응답을나타냈다. 이러한 특성적인 공중합체의 O*($\omega$)차이를 공중합체의 조성단일 고분자 PS, PC의 O*($\omega$)의 가성성을 가정하여 모사하였다 모사에서 구한 광학적 부분 기여 파라메 터를 사용하여 공중합체의 상용성을 고찰하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제28권2A호
• /
• pp.171-178
• /
• 2008

The object of this study is to propose a rate of vibration increase in the analysis of temporary rail non-fixed in the vertical direction and characterize the nonlinear dynamic behavior of temporary rail while considering longitudinal and latitudinal load, vibration and lifting. The rate of vibration increase is proposed through measurement of an actual structure that is largely affected by loading and vibration of the superstructure. Dynamic behavior was additionally characterized by the dynamic response resulting from nonlinear dynamic finite element analysis with vehicle loading, including the rate of vibration increase. As a result, the rate of vibration increase by the vibration of an Auto Bar Machine is determined as 7% and the maximum stress in the analysis of the nonlinear rail is increased 14.5% over that of linear rail, and temporary rail is shown to be very sensitive to the velocity of the superstructure.

• Tunnel and Underground Space
• /
• 제16권2호
• /
• pp.166-178
• /
• 2006

Recently, the frequency of occurring dynamic events such as earthquakes, explosives blasting and other types of vibration has been increasing. Besides, the chances of exposure for rock discontinuities to free faces get higher as the scale of rock mass structures become larger. For that reason, the frictional behavior of rock joints under dynamic conditions needs to be investigated. In this study, artificially fractured rock joint specimens were prepared in order to examine the dynamic frictional behavior of rough rock joint. Roughness of each specimen was characterized by measuring surface topography using a laser profilometer and a series of shaking table tests was carried out. For mated joints, the static friction angle back-calculated ken the yield acceleration was $2.7^{\circ}$ lower than the tilt angle on average. The averaged dynamic friction angle for unmated joints was $1.8^{\circ}$ lower than the tilt angle. Displacement patterns of sliding block were classified into 4 types and proved to be related to the first order asperity of rock joint. The tilt angle and the static friction angle for mated joints seem to be correlated to micro average inclination angle which represents the second order asperity. The tilt angle and the dynamic friction angle for unmated Joints, however, have no correlation with roughness parameters. Friction angles obtained by shaking table test were lower than those by direct shear test.

• Journal of The Korean Society of Agricultural Engineers
• /
• 제54권3호
• /
• pp.159-168
• /
• 2012

본 연구에서는 해성 점성토에 대하여 반복 삼축시험을 실시하고 응력-변형률 관계 및 유효응력경로 특성 분석을 통해 동적 변형 및 강도 특성을 조사하였다. 시험에 사용된 시료는 일본 도쿠시마현의 코마츠시마 항 인근에서 채취된 점성토이며, 반복 삼축시험으로 동적 비배수 삼축시험, 동적 비배수 삼축시험 후 동적 삼축변형시험, 다단계 동적 비배수 삼축시험, 동적 삼축 변형시험 등 4종류의 시험을 수행하고, 시험 주파수로서 0.1 및 0.01 Hz을 적용하였다. 본 연구 결과 0.01 Hz로 수행된 동적 삼축시험 결과는 0.1 Hz로 수행된 삼축시험 결과보다 평균유효응력의 감소량이 크며, 반복 하중은 해성 점성토의 구조적 약화를 초래하고 초기 거동시 발생하는 간극수압과 밀접하게 관련이 있는 것으로 나타났다. 또한 미소변형률 영역에서 등가 탄성계수는 시험 횟수가 증가함에 따라 점차 감소하며, 감쇠비는 점차 증가하는 것으로 보아 변형계수는 반복 하중으로 인한 전단변형률의 축척에 따른 변형률 의존 거동에 관련하는 것으로 판단된다.