• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.3
• /
• pp.311-318
• /
• 2014

Electromagnetic compatibility(EMC) performance of the first Korea space launch vehicle(KSLV-I) should be ensured and verified in order to guarantee the normal operation among the spacecraft, ground facilities which are installed in the space center, and other wireless communication networks. For the purpose of the EMC performance verification, pertinent EMC test specifications, methods, and procedures for both the subsystems and the system should be established in consideration of operational properties and electromagnetic environmental effects. And it is required to maintain and control the EMC properties consistently in accordance with the determined specifications up to the program closing phase. In this paper, sequential management work conducted during the overall development process of the KSLV-I is explained, and not only the phased EMC test plan for each model of the KSLV-I and its subsystem but also test method, specification, and results of the verification tests are presented. And also, multipaction analysis results are presented.

• Journal of KIISE:Information Networking
• /
• v.28 no.3
• /
• pp.297-308
• /
• 2001

In this paper, we design, validate and implement WTP(Wireless Transaction Protocol) using SDT(SDL Design Tool). We do modeling WTP protocol by SDL(Specification and Description Language), design and implement the environment function for the interface between the SDL system and the UDP platform and design APIs(Application Programming Interface). And we do conformance testing for WTP protocol software using ITEX(Interactive TTCN Editor and eXecutor). We write ATS(Abstract Test Suite) by TTCN(Tree and Tabular Combined Notation) and make ETS(Executable Test Suite) by the TTCN compiler supplied by ITEX.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.243-244
• /
• 2012

ITER 초전도자석 전원공급장치에서 고장의 종류는 단락, 단락 외 컨버터 내부고장 그리고 여러 외부요인에 의한 고장 크게 세 가지로 구분된다. 여기서 단락 외 컨버터 내부고장과 외부요인에 의한 고장은 보호시스템 및 장치의 동작으로 인해 피해가 축소된다. 하지만 단락시에는 보호시스템이 동작하더라도 단락전류가 매우 커 큰 피해를 줄 수 있다. 또한 ITER 초전도자석 전원공급장치는 운전 중 발생 가능한 부하의 단락으로부터 초전도자석 및 다른 장치 등을 보호하기 위하여 ITER에서 요구하고 있는 FSC(Fault Suppression Capability: 고장 억제 능력) 조건을 만족해야 한다. FSC 조건에서 전원공급장치는 출력에서 300 kA의 단락전류가 흐를 경우에도 80 ms(50 Hz, 4주기)동안 전기적 고장 없이 견뎌야 한다. 본 논문에서는 전원공급장치에서 발생될 수 있는 주요 단락 항목을 소개하고, 최악의 조건에서 단락전류에 의한 전원공급장치의 고장해석을 통해 FSC 요건을 만족하는 소자 선정 및 구조설계의 적합성을 검증한다.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.205-208
• /
• 1998

영구자석형 하이브리드 스텝모터는 저가이며 개루프 제어 장치와 더불어 기계적인 제어시스템분야에서 광범위하게 이용되어 왔다. 서보모터 기술의 발달에 따라 영구자석형 스템모터는 고토크, 정밀제어의 응용분야에 있어 중요한 위치를 계속 점유하고 있다. 스텝모터는 외란으로서 작용하는 부하의 영향에 대해 안정한 견고성을 가지며, 적당한 속도와 양호한 분해능의 조합으로 신뢰도가 높고, 구조상 단순한 특징을 갖고 있다. 최근 저가의 개루프 위치제어 장치에 2상 스텝모터와 5상 스텝모터 중에서 어느 것이 더 적합한가에 대한 기술적인 주제가 주목할 어느 것이 더 적합한가에 대한 기술적인 주제가 주목할 만한 문제로 대두되고 있다. 이 두 기기의 구조는 거의 유사하며 같은 원리로 동작한다. 본 논문에서는 이 두 기기의 동작이 명백히 비교될 수 있는 기본적인 수준으로 돌아가서 두 모델을 고찰했다.

• Proceedings of the ESK Conference
• /
• 1998.04a
• /
• pp.7-12
• /
• 1998

쾌적한 의생활을 영위하기 위해, 인간의 제반 특성에 적합한 의복 설계에 관한 연구가 활발히 전개되고 있다. 기존 연구에서는 주로 인체 인자에 근거하여 의복 원형 연구가 이루어졌으나 인간 특성에 적합한 의복의 설계를 위해 인체 인자와 함께 의복 인자를 병행한 연구의 필요성이 대두되고 있다. 특히 의복 소재의 경우, 성유과학의 발달로 다양한 의복 소재가 개발되고 있음에도 불구하고 대부분의 의복 원형 연구에서는 광목으로 제한되어 연구가 행해지고 있는데, 광목이 원형 연구시 동작에 따른 체표 변화에 대응하기 위한 여유분으로 정확히 산출할 수 있다는 특징이 있기는 하지만 이로 인하여 의복 원형의 여유 분 설정에 소재의 특성에 따른 차이에 관해서는 아직 까지 많은 연구가 진행되지 못하였다. 이에 본 연구 에서는 최근 마른 체형의 선호와 함께 유행하고 있는 신축성 소재를 이용한 슬랙스 원형에 대하여 연구 하였다. 본 연구는 소재의 신장특성과 의복 설계와의 관계에 대한 기초 자료로써 활용될 수 있을 것이며, 또한 슬랙스 원형에 대한 연구를 보다 다양한 소재로 넓힘으로써 원형의 활용도를 높힐 수 있을 것으로 기대한다.

• Journal of IKEEE
• /
• v.14 no.4
• /
• pp.270-276
• /
• 2010

In this paper, performance comparison of FFT algorithms for OFDM system is shown and advantage of proposed SRFFT is verified through implementation. For the single input and output structure in the most OFDM communication systems, adaptation of SRFFT might be inefficient. In this paper, improved SRFFT with pipeline structured FFT/IFFT of single input and output is developed and verified with Matlab, VHDL, synthesis tool and simulation tool.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.12 s.148
• /
• pp.1535-1545
• /
• 2005

The study aimed firstly, to develop the women's bodysuit sleeve block construction method adopting the appropriate pattern reduction rates according to the fabric stretch property. Secondly, the details applied to the bodysuit sleeve block drafting (Dr the educational and industrial usage were proposed. For these, several distinguishing bodysuit sleeve pattern making methods(i.e. Joseph-Armstrong: T1, Shoben & Ward: T2, Esmod: T3 and Mixed Joseph-Armstrong: T4) were analyzed and divided into two categories that adopt 1) the equally (i.e., T1) and 2) the differently(i.e., T2, T3 & T4) distributed front and back armhole length measurements. Women's sleeve samples were made for the research using the same stretch fabric($50\%\;and\; 70\%$ in wale and course each) to the previous research. A group comprising 5 relevant experts evaluated the fit and comfort features of the samples. Experiments analyzed the appearance of sleeve samples focused on total 13 evaluation parts(including the front/side/back fit tolerance, sleeve centre line, sleeve length, appropriateness of the sleeve appearance balanced with the bodysuit and etc.): and performed the comfort test evaluating three kinds(vertical-front/vertical-side/ horizontal) of arm movements. The most appropriate bodysuit sleeve to fulfil the original aims of the study was suggested. The findings and suggestions throughout the study were: 1) the measurements and required reduction rates for the bodysuit sleeve block developed: outer sleeve length (with 1.0 RR), crown height(with 0.7 RR), front and back armhole lengths measured on the bodysuit blocks ($0\%$ ease amount), elbow width(0.9/0.95 RR), wrist girth measurements(from $12\%\;to\;18\%$ tolerances can be given to): and 2) the differently distributed front and back armhole length measurements resulted in the better fit and comfort through the research.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.3
• /
• pp.480-491
• /
• 2010

This study investigates the body satisfaction and fitness apparel depending on age and silhouette. The subjects were 254 females 20~50 years of age living in Chungju South Korea. There are various body types in women over the age of 35, the lower part of the body-development type, regular type, the upper part of the body-development type, and the rectangular body type. In addition, there is a lower satisfaction level in circumferences related with apparel fit, especially in the sleeve length, armhole, and crotch length. Therefore, a size system is needed that considers various body types in ready-to-wear clothing for middle-aged women. Design, color, and pattern are most important in clothing purchases by unmarried women, but the ease of laundry management and price discounts are the most significant for clothing purchases by married women. The upper part of the body-development type is unsatisfactory in the size-fit of sleeve length and shoulder width, but the lower part of the body-development type is unsatisfactory in the circumference of the waist, hip, abdominal, girth of skirt, and crotch length. The rectangular body type and the lower part of the body-development type are unsatisfactory in movement comfort, especially in hip girth and crotch length. The upper part of the body-development type is unsatisfactory in the movement comfort of the chest and elbow girth.

• The Journal of Society for e-Business Studies
• /
• v.17 no.1
• /
• pp.39-52
• /
• 2012

The introduction of iPhone was an opportunity to increase of internal smarphone users in 2009 and it exceeded 15 millions at August, 2011. According to report about usage of smartphone users, elderly people aged over 60 was quite low compared to other groups. Moreover these elderly peoples feel lag behind cause of smartphone non-use. Thus, the aim of this research is to improve usability of smartphone for elderly peoples. The performance evaluation program and questionnaire were developed for this purpose and objective data and subjective data were collected through these. 22 elderly peoples participated in our research and we could derived proper level of target. The results of this research will be applied to smartphone or application for elderly. The meaning of this research is reveal the detailed touch target for elderly based on smartphone environment.

• Fashion & Textile Research Journal
• /
• v.25 no.4
• /
• pp.520-533
• /
• 2023

The present study developed a test protocol for evaluating the mobility of firefighting chemical and flame personal protective equipment (PPE) for the National 119 Rescue Headquarters in Korea and suggested ergonomic design factors to improve their mobility and performance. Six types of PPE were employed, including three types for flame protective PPE (5 ~ 6 kg excluding the self-contained breathing apparatus), and three types for chemical and flame protective PPE (8 ~ 11 kg). These PPEs are used by the 119 Rescue firefighters. Three male firefighters (34.3 ± 1.2 y in age, 175 ± 8 cm in height, 81 ± 13 kg in body weight) participated in the mobility test and interview. A mobility test protocol consisting of 16 components (nine postures and seven motions including a dexterity test) along with a visibility test were developed based on pre-interviews and literature reviews. The findings indicated that the clothing microclimate humidity on the neck and chest exceeded 85%RH on average for all the six PPE conditions, with the chest area reaching as high as 98%RH. This high humidity caused fogging inside the visor and impaired visibility. The requirements for improving the PPE design in terms of mobility varied depending on whether it was the separated types or all-in-one types, particularly regarding the hood and gloves design. The findings of this study can be applied to improve the design of Level A_PPE for firefighters. The mobility test protocol and visibility test developed in this study can also be applied to other types of Level A impermeable PPE.