• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.4 s.107
• /
• pp.335-340
• /
• 2006

In this paper, a rectangular-cavity-type exposure system for in vitro experiments has been developed fur the biological effect studies of radio frequency fields from handhold wireless telephones. It ia fed with a ${\lambda}_g/8$ monopole antennas at the ${\lambda}_g/4$ position of the top plate in order to excite fundamental $TE_{102}$ mode and it allows the uniform exposure of one 8.5 cm(inner diameter) petri dish. SARs inside the exposed medium have been characterized by numerical simulations, using the FDTD method and by experimental dosimetry with fiberoptic temperature probes (model 790, Luxtron Corp.).

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.261-265
• /
• 2005

This paper describes the DC-DC Converter for Ancillary Power Supply in Hybrid Electric Vehicle. DC-DC Converter is used for charging 12V auxiliary battery supplying electric power to head ramp, audio, ECU etc in automobiles. used DC-DC Converter Topology is PS-ZVS FB(Phase Shifted Zero Voltage Switching Full-Bridge) to reduce switching loss and EMI noise induced by high frequency operating condition. And For easy compensation and stable system response characteristic, current mode control method including slope compensation is employed. Constant current / constant voltage charging control method guarantee stable electric charging of auxiliary battery. Simulation toll PSIM6.0 is used for initial circuit parameter settings and H/W debuging. Thermal problems of Switching components in DC-DC Converter is improved by using Thermo Tracer.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.421-427
• /
• 2013

Disk Cache Manager(DCM), a functional server of microkernel based, to improve the I/O power of shared disks is designed and implemented in this work. DCM interfaces other different servers with message passing through ports by serving as a system actor the multi-thread mode on the Minix3 micro-kernel. DCM proposed in this paper uses the shared disk logically as a Seven Disk and Sodd Disk to enable parallel I/O. DCM enables the efficient placement of disk data because it raises disk cache hit-ratio by increasing the cache size when the utilization of the particular disk is high. Through experimental results, we show that DCM is quite efficient for a shared disk with higher utilization.

• Journal of the Korean Society for Railway
• /
• v.18 no.2
• /
• pp.105-110
• /
• 2015

This paper presents a $4{\times}1$ beam-forming reader antenna system for a new type of RFID based train position detection technology. The required beamwidth of the reader antenna is analytically expressed for different train speeds. The proposed antenna system consists of four rectangular patch elements and two switching couplers which are designed, without any impedance matching networks, for two different antenna modes. The switching coupler is a rectangular quadrature coupler with Pin diodes connecting its center line and the ground plane. The beamwidth of the antenna when the diodes are off and on is $18^{\circ}$ and $39^{\circ}$, respectively. The proposed antenna system will be used for a real train test in the near future.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.335-342
• /
• 2012

This paper is studied on a new DCM-ZVS step up-down AC-DC converter of high performance, that is, high system efficiency and power factor correction (PFC). The switching devices in the proposed converter are operated by soft switching technique using a new quasi-resonant circuit, and are driven with discontinuous conduction mode (DCM) according to pulse width modulation (PWM). The quasi-resonant circuit uses a step up-down inductor and a loss-less snubber capacitor. The proposed converter with DCM also simplifies the requirement of control circuits and reduces the number of control components. The input AC current waveform in the proposed converter becomes a quasi-sinusoidal waveform proportional to the magnitude of input AC voltage under constant switching frequency. As a result, the proposed converter obtains low switching power loss and high efficiency, and its input power factor is nearly in unity. The validity of the analytical findings is confirmed by some computer simulation results and experimental results.

• Journal of Digital Contents Society
• /
• v.16 no.5
• /
• pp.775-781
• /
• 2015

EBS started 2HD MMS experimental broadcasting for the first time in Korea on Feb. 11, 2015. It uses the picture compression technique based on MPEG-2 CODEC, and applies the result of the experiment about variable bit rates and changes according to the scanning types, 1080i and 720p. But when changing channels, the delay in displaying picture occurs because of the operation of the variable GOP on MMS broadcasting, which optimizes image quality by application variable bit rates. In this study, verified the relationship between the decoding time of I frames and the GOP set in the encoding step by experimenting and analyzing ON-AIR TS. By using the verification data and adjusts the Encoder GOP parameters, improved the different video display time delays according to the scanning mode 1080i and 720p.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.132-140
• /
• 2002

By utilizing OSMI (Ocean Scanning Multi-spectral Imager) onboard KOMPSAT-1, the moon can be imaged. Because the moon has no atmosphere and reflects sun lights at a constant rate, it can be the radiance source for calibration of OSMI. But there are a lot of risks which made KOMPSAT-1 enter into safe-hold mode. So planning the imaging of the moon with OSMI should be determined seriously with consideration to information on KOMPSAT-1 operation, the moon, the sun, etc. But it takes a long time for determining the imaging time of the moon using MCE(Mission Control Element) simulator and there are operational problems to be solved. In this paper, fast simulator for determining imaging time for the moon with OSMI has been developed. The proper timeline for imaging the moon and the position of the moon image in OSMI image coordinates and the phase of the moon are determined. STK was used for acquiring information on KOMPSAT-1, the moon, the sun and the characteristitcs of OSMI are considered. As a result, we can determine imaging time of the moon with OSMI much faster and efficiently.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.8
• /
• pp.958-966
• /
• 2012

This paper presents a compact bluetooth/WiFi dual-mode dual-band RF front-end module(FEM) is realized by low temperature co-fired ceramic(LTCC) technology. The proposed RF front-end module consists of a diplexer, baluns in the LTCC substrate, and an SPDT switch, an SP3T switch on the LTCC substrate. In order to reduce the module size and increase integration level, the proposed diplexer and balun are designed using LC lumped elements. The parasitic elements caused by coupling effect between metal pattern layers and ground plane layer are considered during the design. The fabricated dual-mode RF front-end module has 13 pattern layers including three inner ground layers and it occupies less than $3.0mm{\times}3.7mm{\times}0.66mm$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.6
• /
• pp.646-652
• /
• 2014

This paper presents a design and fabrication of Ku-band power amplifier using Gallium Nitride High Electron Mobility Transistor (GaN HEMT) die. In order to fabricate the low-cost Ku-band power amplifier, a Printed Circuit Board(PCB) was used for input/output matching circuits instead of manufacturing process to use an expensive substrate. The measured output power is 42.6 dBm, the drain efficiency is 37.7 % and the linear gain is 7.9 dB under pulse operation at the frequency of 14.8 GHz. Under the continuous wave(CW) test, the output power is 39.8 dBm, the drain efficiency is 24.1 % and the linear gain is 7.2 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.3
• /
• pp.264-272
• /
• 2009

In this paper, a Ka-band 10 W power amplifier module is designed and fabricated using MIC(Microwave Integrated Circuit) module technology which combines multiple power MMIC(Monolithic Microwave Integrated Circuit) chips on a thin film substrate. Modified Wilkinson power dividers/combiners are used for millimeter wave modules and CBFGC-PW-Microstrip transitions are utilized for reducing connection loss and suppressing resonance in the high-gain and high-power modules. The power amplifier module consists of seven MMIC chips and operates in a pulsed mode. for the pulsed mode operation, a gate pulse control circuit supplying the control voltage pulses to MMIC chips is designed and applied. The fabricated power amplifier module shows a power gain of about 58 dB and a saturated output power of 39.6 dBm at a center frequency of the interested frequency band.