• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.18-29
• /
• 1983

A low cost and versatile data acquisition system for the field and laboratory use was developed by using a single board microcomputer. Data acquisition system based on a Z80 microprocessor was built, tested and modified to obtain the present functional system. The microcomputer developed consists of 6 kB ROM, 5 kB RAM, 6-seven segment LED display, 16-Hex. key and 8 command key board. And it interfaces with an 8 channel, 12 bits A/D converter, a microprinter, EPROM programmer for 2716, and RS232C interface to transfer data between the system and HP3000 mini-computer manufactured by Hewlett Packard Co., A software package was also developed, tested, and modified for the system. This package included drivers for the AID converter, LED display, key board, microprinter, EPROM programmer, and RS232c interface. All of these programs were written in 280 assembler language and converted to machine codes using a cross assembler by HP3000 computer to the system during modifying stage by data transferring unit of this system, then the machine language wrote to the EPROM by this EPROM programmer. The results are summarized as follows: 1. Measuring program developed was able to control the measuring intervals, No. of channels used, and No. of data, where the maximum measuring speed was 58.8 microsec. 2. Calibration of the system was performed with triangle wave generated by a function generator. The results of calibration agreed well to the test results. 3. The measured data was able to be written into EPROM, then the EPROM data was compared with original data. It took only 75 sec. for the developed program to write the data of 2 kB the EPROM. 4. For the slow speed measurements, microprinter instead of EPROM programmer proved to be useful. It took about 15 min. for microprinter to write the data of 2 kB. 5. Modified data transferring unit was very effective in communicating between the system and HP3000 computer. The required time for data transferring was only 1~2 min. 6. By using DC/DC converting devices such as 78-series, 79-series. and TL497 IC, this system was modified to convert the only one input power sources to the various powers. The available power sources of the system was DC 7~25 V and 1.8 A.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.345-359
• /
• 2002

The purpose of the study was to provide the fundamental data to instruct athletes through the analysis athletes' movement in javelin. Three athletes in the level of national representative were participated in this study. The study analyzed kinematic variables(lead foot and releasing javelin) through 3-D analysis and obtained the following results. 1. During withdrawal, it is important to maintain of running horizontal velocity. 2. It was showed that throng average height was $84{\pm}3.3%$ and javelin adequative degree, Among the athletes, $S_2$ who had the best record was released the javelin with the fast velocity, but throw the javelin with the less releasing velocity. 3. $S_2$ released after lead foot were completely landed and therefore it is no problem in a kinematic aspect. However, $S_1$ angle was too small. it caused increase of release velocity to be prevented. 4. $S_2$ showing the best result indicated shorter in duration time. Generally, the shorter duration time in release phase showed the longer release distance. Especially $S_1$ and $S_3$ showing the worse result indicated the longer duration time in preparatory phase, causing the breakup of force. Therefore to improve the record, it should be decreased the duration time in preparatory phase. 5. Compared with $S_1$ and $S_3$, $S_2$ showing the best record indicated the higher velocity in center of mass, trunk, upper arm, lower arm and hand That is the higher velocity of upper arm at release leaded the better velocity transfer from upper arm to following lower arm and hand, these action should be considered to be helpful of better record. According to the above conclusion, when the athletic leaders cauch athletes, they should focus on maintaining knee angle, upper body and hip angle in a previous stage of release and throwing angle, throwing height, throwing velocity in a release stage.

• Journal of agricultural medicine and community health
• /
• v.27 no.2
• /
• pp.127-136
• /
• 2002

This study was taken to provide data for the approaches of day care service for the elderly in community health practitioner's post through the study on the utilization rate, characteristics and health promotion that the elderly used the day care services. Data collection used three records that case management in take sheet, dementia check list and ADL record during the one year, from June 21, 2001 to June 30, 2002. During the one year, the elderly used day care services were 119 persons that 26.9% of the total elderly population, 1.5 time per used the elderly, and female elderly(88.9%) more used than male elderly. 39.5%of the elderly user have chronic diseases that was arthritis and hypertension and etc. 41.2% of the elderly users have dementia state that score was $17.39{\pm}7.17$(handicapped elderly), $18.43{\pm}7.36$(healthy elderly), but statistically not significant PADL score was $2.18{\pm}0.55$(handicapped elderly), $2.78{\pm}0.30$(healthy elderly), IADL score was $1.78{\pm}0.51$(handicapped elderly), $2.47{\pm}0.60$(healthy elderly) that were statistically significant. One year later, PADL and IADL of the elderly users were improved that statistically significant(p=0.01). The elderly users were wanted rehabilitation service(22.2%), talking service(20.6%), bath service(12.7%), food service(9.5%) of day care services in CHP's post. We are recommended that day care service for the elderly in CHP's post was very useful and contributed to promote ADL functions.

• The Journal of Engineering Geology
• /
• v.24 no.3
• /
• pp.423-429
• /
• 2014

Development of a reservoir pressure core sampler (PCS) with a built-in data logging system (DLS) for recording real-time temperature and pressure observations is critical in domestic hydrocarbon production to accurately measure and monitor reserves of shale gas, coalbed methane, and gas-hydrate. Another purpose of this new technology is to minimize the loss of gas from the core as the drill core is collected. This is accomplished by maintaining the pressure of the sample from the moment the drill core is obtained at depth, thus allowing an accurate analysis of shale gas, coalbed methane gas, and gashydrate within the core. Currently, the United States and European countries have monopolized the development and marketability of PCS technologies. We are thus developing a reservoir PCS by analyzing the operating principle and mechanisms of the existing PCS, and by conducting tests on the existing PCS. We further aim to develop a PCS with a maximum operating pressure of 100 bar, a maximum operating temperature of $-20^{\circ}C$ to $40^{\circ}C$, and a pressure loss rate of 10%.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.288-289
• /
• 2000

SBN, BSKNN KNSBN 등의 tungsten-bronze 계열에 속하는 광굴절 결정은 짧은 파장에서 좋은 감광도와 빠른 응답시간을 갖는다. 이중에서도 KNSBN 결정은 큰 크기의 결정 성장 및 도핑이 용이하고 광굴절 결정에서 중요한 특성 중 하나인 열 안정성(thermal stability)이 좋기 때문에 빠른 응답특성이 요구되는 응용분야에서 촉망받는 매질이다. 본 논문에서는 광정보저장, 광정보처리, 광컴퓨터, 광통신과 같은 다양한 분야에서 응용가능성을 가지는 Cu가 0.04wt.%도핑된 5mm$\times$5mm$\times$5mm 크기의 KNSBN 결정을 이용한 광신호의 증폭기술에 대하여 연구하였다. 먼저 Cu-KNSNB 결정의 2광파 결합 특성을 분석하기 위하여, 기록 파장에 따른 지수이득계수의 외부입사각의존성, 최대 지수이득계수를 나타내는 외부입사각에서 입사빔의 세기비에 따른 2광파 결합 이득을 측정하였다. 또한, 632.8nm파장 영역에서 기록 및 삭제시간 상수, 회절 효율의 입사빔 세기비 의존성을 측정하였다. 그리고, 음향-광학 변조기(AOM: acousto-optic modulator)에 의해 진폭 변조된 신호빔을 이용하여 광신호 증폭특성을 분석하고 그 결과를 제시하였다. 이때 두 빔의 입사각은 최대 지수이득계수를 나타내는 입사반각 12$^{\circ}$로 고정하고, 감쇄기를 이용하여 신호빔의 세기를 조절하면서 신호빔의 차동이득을 측정하였다. 투과된 신호빔은 같은 주파수에서 차동 이득(diffrerential gain)을 보였으며, 이는 moving grating과 시간-변조된 신호빔(또는 펌프빔)사이의 새로운 상호작용은 광굴절 결정의 시간 적분 특성에 의한 것이다. (중략) 경우는 상온에서 펌프 펄스의 유지시간이 0.5% 인 경우 레이저가 동작하는 것을 보여주었다. 이는 구조내에서 열전도가 문제가 된다는 것을 의미하는데 위아래가 공기로 둘러 싸여 있어 발생한 열이 가는 유전체 네트웍을 통해서만 전달 될 수 있기 때문이다. (중략)$^4$A$_2$에 의한 nophonon line R$_1$, R$_2$(680.4, 678.5 nm) 및 $^2$T$_1$$\longrightarrow$$^4$A$_2$(655.7, 649.3, 645.2 nm)의 형광방출 스펙트럼을 얻었으며, 형광수명은 0.264 ms로 조사되었다. 제조된 레이저 발진봉은 직경 6.3 m, 길이 45 nm이었다.\pm$0.06kHz Ge $F_4$; -1.84$\pm$0.04kHz$0.04kHz/TEX>0.04kHz 모국어 및 관련 외국어의 음운규칙만 알면 어느 학습대상 외국어에라도 적용할 수 있는 보편성을 지니는 것으로 사료된다.없다. 그렇다면 겹의문사를 [-wh]의리를 지 닌 의문사의 병렬로 분석할 수 없다. 예를 들어 누구누구를 [주구-이-ν가] [누구누구-이- ν가]로부터 생성되었다고 볼 수 없다. 그러므로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\ulcorner 본 논문에서는 표면적 형태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X^{0}$ elements)로 가정한다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.3
• /
• pp.201-207
• /
• 2021

Deep learning, a type of machine learning, performs learning while changing the weights as it progresses through each learning process. Tensor Flow and Keras provide the results of the end of the learning in graph form. Thus, If an error occurs, the result must be discarded. Consequently, existing technologies provide a function to roll back learning results, but the rollback function is limited to results up to five times. Moreover, they applied the concept of MLOps to track the deep learning process, but no rollback capability is provided. In this paper, we construct a system that manages the intermediate value of the learning process by blockchain to record the intermediate learning process and can rollback in the event of an error. To perform the functions of blockchain, the deep learning process and the rollback of learning results are designed to work by writing Smart Contracts. Performance evaluation shows that, when evaluating the rollback function of the existing deep learning method, the proposed method has a 100% recovery rate, compared to the existing technique, which reduces the recovery rate after 6 times, down to 10% when 50 times. In addition, when using Smart Contract in Ethereum blockchain, it is confirmed that 1.57 million won is continuously consumed per block creation.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.3
• /
• pp.211-219
• /
• 2021

Chinese Tibetan Opera is a highly comprehensive drama type, which combines the educational aesthetic characteristics of the realism of Western drama and the freehand of Chinese opera, including mask play, square play, ritual play and religious play. Tibetan opera, as a kind of local drama, has high research value, which is determined by its educational aesthetic characteristics. The world's three major dramas include Sanskrit dramas in India, tragic-comedies in ancient Greece and Chinese dramas, which have different forms of expression and educational aesthetic characteristics. Because of the particularity of its birthplace, Tibetan Opera inherits some of the three forms of the above three dramas. Ancient Greek tragedies originate from the sacrificial ritual of the god of wine. In the early ceremonial action performances, the actors were all men and needed to wear masks to perform. In Tibetan opera, men also play a role in masks, which are originated from the folk totem dance and religious pantomime music and dance. Due to the long history of Indian Sanskrit drama, except for the relevant records in dance theory, the specific performance form can not be verified. However, according to the relevant records in dance theory, the three characters "Wenba", "Jialu" and "Lamu" in the opening play of Tibetan opera are similar to the "concept character play" in Sanskrit opera. Tibetan Opera is a very important part of traditional Chinese opera, which inherits the educational aesthetic characteristics of Chinese opera.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.216-219
• /
• 2012

In wireless ad-hoc networks, the nodes configuring a path act as routers with various mobility. If the path is broken by the movement of a node, a new path have to be found again. For this reason, the node with high mobility should be excluded from structuring a path as far as possible. In this paper, we propose an algorithm which excludes nodes with high mobility from constructing a path by collecting and managing the information of mobility. As the result, this can provide more stable paths. The proposed algorithm uses the extended AOMDV method. In this algorithm, we appends History Field and Decline Field in the routing table to collect and manage the mobility information. In addition, we add Mbl Field to RREP (Route Reply) message to apply the collected information to configure the real path.

• Journal of KIISE
• /
• v.44 no.5
• /
• pp.460-468
• /
• 2017

In a real-time cloud environment, the data analysis framework plays a pivotal role. Spark Streaming meets most real-time requirements among existing frameworks. However, the framework does not meet the second scale real-time fault recovery requirement. Spark Streaming fault recovery time increases in proportion to the transformation history length called lineage. This is because it recovers the last state data based on the cumulative lineage recorded during normal operation. Therefore, fault recovery time is not bounded within a limited time. In addition, it is impossible to achieve a second-scale fault recovery time because it costs tens of seconds to read initial state data from fault-tolerant storage. In this paper, we propose two techniques to solve the problems mentioned above. We apply the proposed techniques to Spark Streaming 1.6.2. Experimental results show that the fault recovery time is bounded and the average fault recovery time is reduced by up to 41.57%.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.4
• /
• pp.895-902
• /
• 2016

Smart phone distribution rate has been rising and it's security threat also has been rising. Especially Android smart phone reaches nearly 85% of domestic share. Since repackaging on android smart phone is relatively easy, the number of re-packaged malwares has shown steady increase. While many detection techniques have been proposed in order to prevent malwares, it is not easy to detect re-packaged malwares by static analysis and it is also difficult to operate dynamic analysis in android smart phone. Static analysis proposed in this paper features code reuse of repackaged malwares. We extracted DEX files from android applications and performed static analysis using class names and method names. This process doesn't not include reverse engineering, so it is possible to detect malwares efficiently.