• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.161-168
• /
• 2019

Recently, the development and dissemination of electric vehicles is increasing as a solution for carbon and emission reduction. In Korea, the supply of electric vehicles and the expansion of chargers are increasing rapidly every year under the supervision of the Ministry of Environment. In this paper, we study the portable smart test technology which enables quick check of charge related to faults in both electric car and charger to solve the problem of failure which is inevitable in the diffusion of electric car charger. To verify the normal operation of the communication protocol between the electric car and the charger, a hardware module and software were constructed, and a portable tester based on the international standard considering the V2G technology was developed and evaluated.

• Journal of Sensor Science and Technology
• /
• v.30 no.3
• /
• pp.175-180
• /
• 2021

In this paper, methods for improving the sensitivity of gas sensors to NO₂ gas are presented. A gas sensor was fabricated based on an SnO₂ nanowire network using the vapor-phase-growth method. In the gas sensor, the Au electrode was replaced with a fluorinedoped tin oxide (FTO) electrode, to achieve high sensitivity at low temperatures and concentrations. The gas sensor with the FTO electrode was more sensitive to NO₂ gas than the sensor with the Au electrode: notably, both sensors were based on typical SnO₂ nanowire network. When the Au electrode was replaced by the FTO electrode, the sensitivity improved, as the contact resistance decreased and the surface-to-volume ratio increased. The morphological features of the fabricated gas sensor were characterized in detail via field-emission scanning electron microscopy and X-ray diffraction analysis.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.3
• /
• pp.441-448
• /
• 2022

In the distribution system, there are multiple power protection systems such as circuit breakers at substations, and reclosers, minimum circuit ampacities, fault interrupters on distribution lines. They are widely used to prevent partial outages, cascading power failure or blackout so that other healthy systems could maintain the integrity in case of the instant fault or permanent failure on the power lines. However, when a fault happens, it could cause a major black out due to the lack of the protection cooperation between the protection relay of the circuit breaker at a substation and a protection system on the distribution lines. To achieve the power system integrity better, it is required to develop the circuit breaker which can be operational within 1 cycle(16ms). In this study, the high speed circuit breaker which is filled up with eco-friendly gas is developed. This equipment achieved an excellent test results based on IEC 62271-111 standard. It is respected that this equipment would contribute to prevent the wide area blackout by isolating a fault area quicker and faster.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.525-530
• /
• 2023

Although double-stage hanger is used in many homes for its space utilization and ease of installation, it is inconvenient for users to take off clothes hung on the upper bar due to its high height. Therefore, this paper proposes a new type of double-stage hanger that allows users to easily hang or take out clothes hung on the upper bar while maintaining the function of the existing double-stage hanger. 4-bar link mechanism is applied so that the upper bar can come down to a convenient height with one operation. In addition, an appropriate link shape, length, and joint type are selected so that the height is adjusted three-dimensionally to prevent overlapping of clothes hanging on upper/lower bars. FEA analysis is performed to ensure that the presented hanger shape can support the load of clothes during height adjustment and the feasibility of the three-dimensional height adjustment hanger is verified through fabrication.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.264-264
• /
• 2016

최근에 charge trap flash (CTF) 기술은 절연막에 전하를 트랩과 디트랩 시킬 때 인접한 셀 간의 간섭현상을 최소화하여 오동작을 줄일 수 있으며 낸드 플래시 메모리 소자에 적용되고 있다. 낸드 플래시 메모리는 고집적화, 대용량화와 비휘발성 등의 장점으로 인해 핸드폰, USB, MP3와 컴퓨터 등에 이용되고 있다. 기존의 실리콘 기반의 플래시 메모리 소자는 좁은 밴드갭으로 인해 투명하지 않고 고온에서의 공정이 요구되는 문제점이 있다. 따라서, 이러한 문제점을 개선하기 위해 실리콘의 대체 물질로 산화물 반도체 기반의 플래시 메모리 소자들이 연구되고 있다. 산화물 반도체 기반의 플래시 메모리 소자는 넓은 밴드갭으로 인한 투명성을 가지고 있으며 저온에서 공정이 가능하여 투명하고 유연한 기판에 적용이 가능하다. 다양한 산화물 반도체 중에서 비정질 In-Ga-Zn-O (a-IGZO)는 비정질임에도 불구하고 우수한 전기적인 특성과 화학적 안정성을 갖기 때문에 많은 관심을 받고 있다. 플래시 메모리의 고집적화가 요구되면서 절연막에 high-k 물질을 atomic layer deposition (ALD) 방법으로 적용하고 있다. ALD 방법을 이용하면 우수한 계면 흡착력과 균일도를 가지는 박막을 정확한 두께로 형성할 수 있는 장점이 있다. 또한, high-k 물질을 절연막에 적용하면 높은 유전율로 인해 equivalent oxide thickness (EOT)를 줄일 수 있다. 특히, HfOx와 AlOx가 각각 trap layer와 blocking layer로 적용되면 program/erase 동작 속도를 증가시킬 수 있으며 넓은 밴드갭으로 인해 전하손실을 크게 줄일 수 있다. 따라서 본 연구에서는 ALD 방법으로 AlOx와 HfOx를 게이트 절연막으로 적용한 a-IGZO 기반의 thin-film transistor (TFT) 플래시 메모리 소자를 제작하여 메모리 특성을 평가하였다. 제작 방법으로는, p-Si 기판 위에 열성장을 통한 100 nm 두께의 SiO2를 형성한 뒤, 채널 형성을 위해 RF sputter를 이용하여 70 nm 두께의 a-IGZO를 증착하였다. 이후에 소스와 드레인 전극에는 150 nm 두께의 In-Sn-O (ITO)를 RF sputter를 이용하여 증착하였고, ALD 방법을 이용하여 tunnel layer에 AlOx 5 nm, trap layer에 HfOx 20 nm, blocking layer에 AlOx 30 nm를 증착하였다. 최종적으로, 상부 게이트 전극을 형성하기 위해 electron beam evaporator를 이용하여 platinum (Pt) 150 nm를 증착하였고, 계면 결함을 최소화하기 위해 퍼니스에서 질소 가스 분위기, $400^{\circ}C$, 30 분의 조건으로 열처리를 했다. 측정 결과, 103 번의 program/erase를 반복한 endurance와 104 초 동안의 retention 측정으로부터 큰 열화 없이 메모리 특성이 유지되는 것을 확인하였다. 결과적으로, high-k 물질과 산화물 반도체는 고성능과 고집적화가 요구되는 향후 플래시 메모리의 핵심적인 물질이 될 것으로 기대된다.

• Journal of Sensor Science and Technology
• /
• v.11 no.6
• /
• pp.342-349
• /
• 2002

New formation technique of metal oxide sensing film was proposed m this paper. Silicon wafer with Pt electrodes was used as a substrate for depositing metal Sn film. Metal Sn was deposited in the state of not continuous film but only island state. The samples were prepared to obtain the optimal condition of metal Sn deposition. The resistances of deposited Sn onto Pt electrodes amounted to $1\;k{\Omega}$, $5\;k{\Omega}$, $10\;k{\Omega}$ and $50\;k{\Omega}$, respectively. Also The sample with $1,500\;{\AA}$ thickness of Sn was prepared m order to compare sensing properties between conventional type and proposing type. After deposition of metal Sn, $SnO_2$ was formed by thermal oxidation method for 3 hrs. in $O_2$ ambient at $700^{\circ}C$. Surface morphology, crystal structure and surface roughness of oxidized-sensing film were examined by SEM, XRD, and AFM, respectively. From the results of these analyses, the optimal deposition condition of Sn was that the Pt electrode resistance became $10\;k{\Omega}(300\;{\AA})$. Also, the sensing characteristics of fabricated sensing film for various concentrations of butane, propane and carbon monoxide gases were measured at he operating temperatures of $250^{\circ}C$, $300^{\circ}C$ and $350^{\circ}C$, respectively. Although catalyst as not added to the sensing film, it has exhibited the high sensitivity to all the test gases.

• Journal of Nutrition and Health
• /
• v.4 no.1
• /
• pp.49-62
• /
• 1971

한국인(韓國人)의 기초대사량(基礎代謝量)과 1일소비열량(日消費熱量)을 측정(測定)하기 위하여 Douglas씨(氏) ${\ulcorner}$빽${\lrcorner}$과 Scholander씨(氏) ${\ulcorner}$가스${\lrcorner}$ 분석기(分析器)를 사용(使用)하여 넓은 연령(年齡), 직종(職種), 활동(活動)의 영역(領域)에 긍(亘)하여 실험(實驗)을 행(行)하였다. 938 예(例)의 기초대사측정치(基礎代謝測定値)는 Boothby, Fleish, Robertson and Reid 등(等)의 표준치(標準値)와 근사(近似)하였다. 겨울에는 기초대사량(基礎代謝量)은 9.9%의 증가(增加)를 또한 수면중(睡眠中)의 대사량(代射量)은 기초대사량(基礎代謝量)의 약(約) 94%이었다. 또한 Sanborn Metabulator를 사용(使用)하여 1,000 명(名) 이상(以上)의 기초대사량(基礎代謝量)을 측정(測定)하였다. 또한 여러 가지 동작(動作) 활동중(活動中)의 소비열량(消費熱量)이 측정(測定)되었다. 하루의 전소비열량(全消費熱量)은 $3{\sim}7$일간(日間)에 긍(亘)하여 하루 24시간(時間)의 활동상황(活動狀況)을 분단위(分單位)로 기록(紀錄), 집계(集計)하고 이것과 기초대사량(基礎代謝量) 및 개별활동시(個別活動時)의 소비열량(消費熱量)을 참작(參酌), 계산(計算)하였다. 수면중(睡眠中)의 소비열량(消費熱量)은 기초대사량(基礎代謝量)에 준(準)하였는데 사무원(事務員), 교원(敎員), 의사(醫師), 약사(藥師), 점원(店員), 운전수(運轉手), 건축기사(建築技師), 설계사(設計師), 응원사(應園師), 목공(木工), ${\ulcorner}$펜기${\lrcorner}$ 공등(工等)의 1일소비열량(日消費熱量)은 FAO 한국협회책정(韓國協會策定)의 한국인(韓國人) ${\ulcorner}$칼로리${\lrcorner}$에 근사(近似)하였고 ${\ulcorner}$쿡${\lrcorner}$, ${\ulcorner}$웨이터${\lrcorner}$, 농부(農夫), 사공(士工), 기계공(機械工), 석공(石工)은 중등정도(中等程度)의 노동(勞動)의 3,000 ${\ulcorner}$칼로리${\lrcorner}$나 또는 중(重)한 노동(勞動)의 3,900 ${\ulcorner}$칼로리${\lrcorner}$에, 가정주부(家政主婦), 하녀(下女), ${\ulcorner}$디자이너${\lrcorner}$는 여자(女子)의 중등정도(中等程度) 노동(勞動)의 2,200 ${\ulcorner}$칼로리${\lrcorner}$, 간호원(看護員), 청소부(淸掃婦), ${\ulcorner}$쿡${\lrcorner}$ 방(房)바닥연마공(硏磨工)은 중(重)한 노동(勞動)의 2,800${\ulcorner}$칼로리${\lrcorner}$에 모심기 하는 날의 농부(農夫)는 격심(激甚)한 노동(勞動)의 4,100${\ulcorner}$칼로리${\lrcorner}$에 각각(各各) 가까웠다. 여자(女子)일지라도 포제용(鋪製用) 돌까기와 돌날르기는 남자(男子)의 중노동정도(重勞動程度)의 ${\ulcorner}$칼로리${\lrcorner}$를 소비(消費)하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.1
• /
• pp.72-79
• /
• 2013

In wireless sensor networks, the selective wakeup scheme is one of the energy saving mechanisms, that is used for an object detecting or tracking. Recently, many protocols are proposed using the selective wakeup scheme for the continuous objects tracking such as forest fires and poison gas. They predict the future shape of continuous objects and activate only sensors in the predicted boundary area of the objects. It works correctly in a uniformly deployed wireless sensor networks. However, it cannot be directly applied to a randomly deployed sensor networks with voids. When the predicted area is in the void area, the activation message cannot reach and the predicted area cannot be activated at the right time. It leads to many detection errors for continuous object. Moreover, if a sensor is once foiled in a activation control then the next activation control might be continuously failed. The detection errors can be result in serious harm to people. In this paper, we propose a chaining selective wakeup scheme for robust continuous object tracking in wireless sensor networks. In our protocol, we collect the information of a void area during the network configuration time; if the next boundary area is in the void area, we activate the chained area surrounding the void area with activation control message.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.375-383
• /
• 2011

Recent advances in digital technology and diversified internet services have resulted in a rapid growth of research on monitering systems using embedded web servers in USN systems. In designing USN systems equipped with wireless sensor modules requiring extra power for heating sensors for their appropriate operations, excessive power consumption introduces inefficiency to the entire system. In this paper, using embedded systems in web environment, we develop a remote-monitoring system with VOC (Volatile Organic Compounds) sensor signal, and propose a real time method of processing sensor-data streams by way of the serial bus from the sensor module in the USN system. The proposed system has an advantage of monitering the harmful gases on real-time basis and can be used semi-permanently by providing the sensor module with power through the serial bus. The harmful gas to be detected by the VOC sensor module is Toluene and the sensor module is composed of TGS-2602 VOC(Volatile Organic Compounds) sensors of FIGARO. The detected signal is transferred to the embedded web server using the RS-485 serial communication device. The proposed remote VOC monitering system is designed to coordinate in such a way that the VOC sensor module and embedded web server (EMPOS-II) work together effectively for real time monitering of harmful gases on the web at any places where the internet is connected.

• Journal of KIISE:Information Networking
• /
• v.36 no.6
• /
• pp.514-527
• /
• 2009

Wireless sensor networks (WSNs) can be used in various applications for military or environmental purpose. Recently, there are lots of on-going researches for detecting and tracking the spread of continuous objects or phenomena such as poisonous gas, wildfires, earthquakes, and so on. Some previous work has proposed techniques to detect edge nodes of such a continuous object based on the information of all the 1-hop neighbor nodes. In those techniques, however, a number of nodes are redundantly selected as edge nodes, and thus, the boundary of the continuous object cannot be presented accurately. In this paper, we propose a new edge detection method in which edge nodes of the continuous object are detected based on the information of the neighbor nodes obtained via the Localized Delaunay Triangulation so that a minimum number of nodes are selected as edge nodes. We also define the sensor behavior rule for tracking continuous objects energy-efficiently. Our simulation results show that the proposed edge detection method provides enhanced performance compared with previous 1-hop neighbor node based methods. On the average, the accuracy is improved by 29.95% while the number of edge nodes, the amount of communication messages and energy consumption are reduced by 54.43%, 79.36% and 72.34%, respectively. Moreover, the number of edge nodes decreases by 48.38% on the average in our field test with MICAz motes.