• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.12
• /
• pp.984-986
• /
• 2013

DCF(Distributed Coordination Function) defined in IEEE 802.11 provides two different modes, namely, a 2-way handshake and a 4-way handshake according to the transmission procedure. If secondary transmission would not cause a collision with primary transmission, there is no need to postpone transmission unnecessarily. We study a feasible condition which can transmit data concurrently and propose a concurrent transmission scheme.

• Journal of Internet Computing and Services
• /
• v.13 no.4
• /
• pp.95-102
• /
• 2012

The development of applications for vehicular ad hoc networks (VANETs) has very specific and clear goals such as providing intellectual safe transport systems. An emergency warning technic for public safety is one of the applications which requires an intelligent broadcast mechanism to transmit warning messages quickly and efficiently against the time restriction. The broadcast storm problem causing several packet collisions and extra delay has to be considered to design a broadcast protocol for VANETs, when multiple nodes attempt transmission simultaneously at the access control layer. In this paper, we propose an early intelligent alert broadcasting (EI-CAST) algorithm to resolve effectively the broadcast storm problem and meet time-critical requirement. The proposed algorithm uses not only the early alert technic on the basis of time to collision (TTC) but also the intelligent broadcasting technic on the basis of fuzzy logic, and the performance of the proposed algorithm was compared and evaluated through simulation with the existing broadcasting algorithms. It was demonstrated that the proposed algorithm shows a vehicle can receive the alert message before a collision and have no packet collision when the distance of alert region is less than 4 km.

• Journal of the Korean earth science society
• /
• v.25 no.6
• /
• pp.443-473
• /
• 2004

In northern Gohung granitic gneiss, porphyroblastic gneiss and migmatitic gneiss are widely distributed. Gneisses were plotted in granodiorite domain on an lUGS silica-alkali diagram. The amounts of trace elements (Li, Zn, Sc, Sr, Ni, V Y etc.) vs. $SiO_2$, somewhat decreased. Plagioclase showed a wide compositional range ($An_{32-48}$). $X_{alm}$ and $X_{sps}$ were higher in garnet rim and $X_{pyp}$ in garnet core. The rocks in the study area were formed from S and I-type magmas which generated from syn-collision and the late to post-orogenic tectonic environment. Metamorphic P-T conditions u·ere low to medium pressure, high temperature (803-913$^{\circ}C$, 6.1-7.3 kb) and overprinted by retrograde metamorphism (570-726$^{\circ}C$, 2.2-5.1 kb) and chloritization.

• Journal of the Korean earth science society
• /
• v.29 no.3
• /
• pp.221-245
• /
• 2008

The precambrian granitic gneiss and porphyroblastic gneiss are widely distributed in the Gwangyang-Hadong area of Korea. This study focuses on the geochemical properties and metamorphic P-T conditions of these gneisses. These gneisses are plotted according to granodiorite domain on an IUGS silica-alkali diagram. Geochemical properties of major elements suggest that these rocks are of the sub-alkalic rock series, and were farmed from S-type magmas which were generated in a syn-collision tectonic environment. The amounts of trace elements (Zn, Sc, Sr, V, etc.) decreased as $SiO_2$ concentrations increased. Almandine and spessartine mol%'s and XFe are higher in garnet rims, while pyrope mol%'s are higher in the garnet cores. This seems to be the result of garnet growth and retrogressive metamorphism. Metamorphic zones are divided into sillimanite-cordierite, sillimanite, garnet, and biotite zones. Metamorphic P-T conditions estimated from the gneisses indicate high temperature and low to medium pressure metamorphism (689-757$^{\circ}C$, 5.0-5.6 kbar), followed by medium temperature, low pressure retrorade metamorphism (579-628$^{\circ}C$, 3.1-4.5 kbar), and overprinted retrogade metamorphism (502-558$^{\circ}C$, 1.6-2.3 kbar).

• ICROS
• /
• v.2 no.3
• /
• pp.81-91
• /
• 1996

이 글에서는 Multi-Tasking Real Time O.S인 VxWorks를 기본으로 하여 다중센서 융합(Multi-Sensor Fusion) 능력을 갖는 다중 로봇 협조제어 시스템의 구현에 대하여 살펴보았다. 본 제어 시스템은 두대 로봇의 제어에 필요한 장애물 회피, 조건 동작(Conditional Motion) 혹은 동시동작(Concurrent Motion)과 외부 디바이스와의 동기 Motion(Conveyor Tracking)을 수행할 수 있게 구현하였고, 몇몇 작업을 통해 우수성을 입증하였다. 앞으로 본 연구와 관련한 추후 과제로는 1) 자유도가 6관절형인 수직다관절 매니퓰레이터를 위한 충돌회피 알고리즘의 개발, 2) Two Arm Robot의 상대 위치를 위한 Auto-Calibration 시스템의 개발, 3) CAD Based Trajectory 생성 등이 있다.

• Korean Journal of Crystallography
• /
• v.20 no.1
• /
• pp.1-8
• /
• 2009

이온산란 분광법(ISS: Ion Scattering Spectroscopy)은 표면 원자의 구조를 러더포드 후방산란법(RBS: Rutherford Backscattering Spectroscopy) 등과 같이 실공간에 대하여 직접 정보를 얻는 방법이다. 그 중에서도 산란각도를 $180^{\circ}$로 고정하여 산란이온 검출기를 설치한 직충돌 이온산란 분광법(ICISS: Impact Collision Ion Scattering Spectroscopy)은 산란된 이온의 궤적이 입사궤도와 거의 동일하기 때문에 산란궤적의 계산이 간단해지고, 최외층 뿐만 아니라 표면에서 수 층 깊이의 원자구조의 해석이 가능하다. 또한 비행시간형(TOF: Time-Of-Flight) 분석기를 채택하여 산란 이온 및 중성원자를 동시에 측정하면 입사 이온의 표면에서의 중성화에 관계 없이 산란 신호를 얻으므로 표면 원자의 결합 특성에 영향 받지 않고 사용할 수 있다. 본고에서는 ICISS의 원리, 장치, 측정방법 등을 소개한 제1편 및 반도체 표면구조, 금속/반도체 계면 등의 해석에 관하여 기술한 제2편에 이어서 세라믹 재료의 표면 원자 구조, 세라믹 박막의 원자 구조, 흡착 기체의 구조, 원소의 편석 등에 관한 연구 사례를 소개하고자 한다.

• The Journal of the Petrological Society of Korea
• /
• v.8 no.2
• /
• pp.81-91
• /
• 1999

The area of the study is located in Ogcheon district, middle part of Ogcheon Fold Belt. The area is covered by metasedimentary rocks of Ogcheon Supergroup at northern, eastern and southern part. Jurassic Ogcheon granite which intruded into Ogcheon Supergroup at central part, was intruded by Cretaceous quartz porphyry at western part. The granite consists of quartz, plagioclase, alkali feldspar, biotite, sphene, apatite, epidote, opaque and so on. It is generally characterized by grey to light grey, medium-grained, mafic enclave and partly weak foliation. In terms of geochmical compositions, the granite is felsic, peraluminous, subalkaline and calc-alkaline, and it was differentiated from single granitic magma. It shows parallel LREE enrichment and HREE depletion patterns with 0.84 Eu negative anomaly, which has REE variation trend and anomaly value similar to Jurassic granites in Korea. From charactristics of petrology, mineralogy and geochmistry, it may be interpreted that the Ogcheon granite body was derived from melting of I-type crustal material related to syn-collisional tectonic setting and emplaced more or less rapidly into the Ogcheon Supergroup.

• Journal of the Korean earth science society
• /
• v.22 no.3
• /
• pp.163-178
• /
• 2001

Granite gneiss, pophyroblastic gneiss and leucocratic gneiss are widely distributed in the Seungju-Suncheon area, the southwestern part of the Sobacksan Massif, Korea. These orthogneisses show intrusive relationships in outcrops of the study area. This study focuses on the geochemical properties and the tectonic environments for the original rocks of these orthogneisses. The pophyroblastic gneiss is plotted in diorite and granodiorite domain, and granite gneiss and leucocratic gneiss are plotted in both of granodiorite and granite domains on lUGS silica-alkali diagram. Geochemical properies of major elements suggest that these rocks are sub-alkali rock series, and were formed from S-type magma which generated in syn-collision tectonic environment. Discrimination diagrams using HFS elements suggest that original rocks of the three orthogneisses were granitoid of calc-alkali rock series, and were formed in syn-collision environment.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.4
• /
• pp.53-63
• /
• 2008

Reader collision may occur when neighboring RFID readers use the same channel at the same time. Especially when the readers are operated in dense mode, even though many channels are available, because of frequent reader collisions we can not guarantee the performance of RFID readers. Conventional solutions such as FH(Frequency Hopping) or LBT(Listen Before Talk) are not effective in this situation because they can not schedule RFID readers effectively when RFID readers are operated in multi-channel, dense reader mode, In this paper, we propose a new RFID reader anti-collision algorithm which employs LBT, random backoff before channel access, and probabilistic channel hopping at the same time. While LBT and Random backoff before channel access reduces collisions between competing readers, probabilistic channel hopping increases channel utilization by adaptively changing the hopping probability by reflecting the reader density and utilization. Simulation results shows that our algorithm outperforms conventional methods.

• Journal of KIISE:Databases
• /
• v.29 no.4
• /
• pp.297-310
• /
• 2002

The 2PL-HP(Two Phase Locking with High Priority) method has been used to guarantee preceding process of a high priority transaction(HPT) in real-time database systems. The method resolves a conflict through aborting or blocking of a low priority transaction(LPT). However, if HPT is eliminated in a system because of its deadline missing, an unnecessary aborting or blocking of LPT is occurred. Recently, to resolve the problem, a concurrency control algorithm using alternative version was proposed. However, the algorithm must always create the alternative version and needs an addtional technique to manage complex alternative versions. In this paper, we propose an efficient concurrency control algorithm that prevents needless wastes of resources and eliminates unnecessary aborting or blocking of LTP. And it is shown through the performance evaluation that the proposed concurrency control algorithm outperforms the existing concurrency control algorithm using alternative version.