• Clean Technology
• /
• v.24 no.2
• /
• pp.127-134
• /
• 2018

To reduce the environmental pollution by $NO_x$ from ship engine, International maritime organization (IMO) announced Tier III regulation, which is the emmision regulation of ship's exhaust gas in Emission control area (ECA). Selective catalytic reduction (SCR) process is the most commercial $De-NO_x$ system in order to meet the requirement of Tier III regulation. In generally, commercial ceramic honeycomb SCR catalyst has been installed in SCR reactor inside marine vessel engine. However, the ceramic honeycomb SCR catalyst has some serious issues such as low strength and easy destroution at high velocity of exhaust gas from the marine engine. For these reasons, we design to metallic structured catalyst in order to compensate the defects of the ceramic honeycomb catalyst for applying marine SCR system. Especially, metallic structured catalyst has many advantages such as robustness, compactness, lightness, and high thermal conductivity etc. In this study, in order to support catalyst on metal substrate, coating slurry is prepared by changing binder. we successfully fabricate the metallic structured catalyst with strong adhesion by coating, drying, and calcination process. And we carry out the SCR performance and durability such as sonication and dropping test for the prepared samples. The MFC01 shows above 95% of $NO_x$ conversion and much more robust and more stable compared to the commercial honeycomb catalyst. Based on the evaluation of characterization and performance test, we confirm that the proposed metallic structured catalyst in this study has high efficient and durability. Therefore, we suggest that the metallic structured catalyst may be a good alternative as a new type of SCR catalyst for marine SCR system.

• Korean Journal of Poultry Science
• /
• v.43 no.4
• /
• pp.235-242
• /
• 2016

This study was conducted to investigate the microbiological sanitation status of raw chicken meat distributed in Korea, and potential changes in chicken breast quality during storage. The microbiological sanitation status analysis of raw chicken involved studying the results of microbiological monitoring for a 5-year period (2010~2014) by the Korean Food and Drug Administration. Furthermore, the microbiological status of raw chicken meat in meat packing centers and shops in Seoul/Gyeonggi, Kangwon, and Chungcheong Provinces was investigated from July to August 2015. The total bacterial counts of chicken meat in the packaging centers and meat shop of these Provinces were below the level specified in the Korean Meat Microbiological Guideline ($1{\times}10^7$ colony forming units [CFU]/g) and showed a similar microbiological sanitation status with results of the microbiological monitoring for the analyzed 5-year period. To evaluate the relationship between quality change and microbiological level of the meat distributed in Korea, the pH and microbiological and sensory quality characteristics of the chicken breast samples during storage at $4{\pm}2^{\circ}C$were determined. On day 4, the total bacterial count of the chicken breast was 6.76 log CFU/g, which was close to the official $1{\times}10^7CFU/g$ standard, the pH was 5.96, and the overall acceptability was reduced significantly (p<0.05). In particular, the aroma score was <5, indicating that the consumer panel expressed a negative perception even though the chicken contained a lower microbial level than that specified in the Korean microbiological guideline. These results suggest that the current Korean microbiological guideline for raw chicken meat may require a stricter level of up to $1{\times}10^6CFU/g$ to satisfy both meat safety standards and organoleptic quality for consumers.

• Conservation Science in Museum
• /
• v.19
• /
• pp.1-18
• /
• 2018

The Stele for National Preceptor Hongbeop from the Jeongtosa Temple site in Chungju is one of the most important stone cultural heritage items for exemplifying the style of the Goryeo era. Despite its obvious value, this relic has been stored in a weathered condition at the National Museum of Korea. It had suffered various dismantling and displacements during the Japanese colonial period and had long been exposed in the open air. The stele was selected as a subject for the Stone Monuments Restoration Project launched by the National Museum of Korea in 2015. In preparation for its outdoor exhibition as part of the restoration project, this study investigated the characteristics of its materials, produced a map of its deterioration from weathering, and carried out ultrasonic analysis of the materials to provide findings useful for conservation treatment. The materials analysis revealed that the turtle-shaped pedestal of the stele was made from two-mica granite consisting of medium-grained quartz, plagioclase, alkali feldspar, biotite, and muscovite. Its body stone is crystalline marble, the rock-forming mineral in which is medium-grained calcite in a rose-pink color with dark grey spots. The dragon top of the stele is made of crystalline marble, the major component of which is medium-grained calcite of a light-grey color. The deterioration consists of 21.5% abrasion on the stone body, with its south face most damaged, and 18.6% granular disintegration, with the north face most damaged. The ultrasonic material characterization conducted for mapping the general condition of weathering shows low values on the parts-assembly area of the turtle-shaped pedestal and on the upper portion of the stone body. It is considered that there is dislocation due to partial blistering and fracturing as well as to the differences in surface treatment. Prior to the outdoor exhibition of the stele, the surface was cleaned of contaminants and was consolidated based on the scientific investigation in order to prevent weathering from the external environment.

• Journal of Life Science
• /
• v.26 no.9
• /
• pp.991-998
• /
• 2016

NF-κB acts as a critical transcription factor for the survival of cells via the induction of antiapoptotic genes. Constitutive activation of NF-κB in many types of solid tumors suggests that the inhibition of NF-κB might prevent or inhibit tumorigenesis. Although a number of studies demonstrated that Hsp70 regulated NF-κB activity, the exact mechanism is not clear. This study investigated the functional relationship of Hsp70 and IKKγ in the regulation of NF-κB activation using expression plasmids of components of the IKK complex. Wild-type and deletion mutants of IKKγ were expressed together with Hsp70, and the combined regulatory effect of Hsp70 and IKKγ on NF-κB activation was assayed. Hsp70 suppressed the activation of NF-κB in a reporter plasmid assay. Hsp70 also suppressed the phosphorylation and degradation of IκBα. The suppressive effect of Hsp70 on NF-κB activation was synergistically elevated by IKKγ. The N-terminal IKKβ binding site, C-terminal leucine zipper, and zinc finger domains of IKKγ were not necessary for the suppressive effect. Furthermore, Hsp70 and IKKγ synergistically suppressed the induction of COX-2 expression by lipopolysaccharides in RAW264.7 cells. These results suggest that overexpression of Hsp70 and IKKγ may be a strategic method for inhibition of NF-κB and related diseases.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.3 no.1
• /
• pp.81-86
• /
• 2004

Objectives: To assess the functional outcome of Bankart repair and rotator cuff repair using miniopen technique in patients with recurrent shoulder dislocation(8 cases) with rotator cuff tears and Bankart lesion of over 40 years. Materials and Methods: From May 1991 to January 2002, twenty two patients were available to participate in the study. Mean age was 52 years old(41-67), Follow-up evaluations averaged 50.5months(10-147). Results: The patients(22 cases) were divided into two groups. Group 1: with recurrent shoulder dislocation(8 cases) with rotator cuff tears and Bankart lesion in patients over 40 years old. Group 2: without Bankart lesion(14 cases). In Group 1, mean average of forward flexion and abduction improved from 122 degrees to 154 degrees at the final follow-up and from 115 degrees to 161 degrees respectively. In terms of University of Pennsylvania patient self-assessment of pain score and VAS, scores improved from 11.0 to 5.5 and from 5.4 to 2.5 respectively. In terms of UCLA score & Constant score, scores also improved from 20.2 to 29.6 and from 48.6 to 69.0 respectively. Functional outcome of Group 1: two patients with excellent, four patients with good, and two patients with fair. Functional outcome of Group 2: two patients with excellent, six patients with good, five patients with fair, and one patient with poor. But they had no statistical significance between the two groups. All cases were improved shoulder pain at the final follow up. And six patients were satisfied with the outcome of shoulder function. Conclusions: This study demonstrates the effectiveness of Bankart repair and rotator cuff repair using miniopen technique in patients with recurrent shoulder dislocation(8 cases) with tears of rotator cuff and Bankart lesion older than 40 years. We recommend Bankart repair and rotator cuff repair at the same time.

• Journal of Korean Society of Forest Science
• /
• v.27 no.1
• /
• pp.5-14
• /
• 1975

Eroded sloping faces in hillsides including cut-bank slopes are liable to both surface erosion and land-slides and the key to control of these form of erosion lies with drainages of excessive run-off and dense vegetation establishment including surface mulching on the slopes. Micro-plots having $1.6m^2$ (1 metre in width and 1.6 metres in slope length, and 1:1.2 in gradient) of banking slopes on coarse sand soil are used to establish the order of magnititude of the difference in controlling of soil erosion and water runoff, and in rating of survival, performed on the repetetions of three-experiment plots consisted of such three levels as 90% (Dense), 70% (Moderate), and 50% Sparse of the density of the coarse straw-mat mulchings. The main results obtained may be summarized as follows: 1. The rates of surface runoff are calculated as 13.13% from the dense mulchings, 14.21% from the moderate mulchings, and 15.57% from the sparse mulchings respectively. 2. The total amounts of soil loss are measured as about 1.24 tons/ha. from the dense mulchings, about 1.33 tons/ha. from the moderate mulchings, and about 1.44 tons/ha. from the sparse mulchings respectively. The amounts of soil loss under these treatments are much lower than the standard of erosion in USDA (1939 Bennet). 3. Average numbers of germination by treatment are counted as 80 seedlings at the dense mulchings. 132 at the moderates and 121 at the sparse respectively. Large numbers of seedling are suppressed and died during the growing at the dense mulchings due to mainly mechanical obstruction. 4. Coarse straw-mat having about 70% of coverage density is the most suitable mulches in both soil erosion control and vegetation establishment. 5. The method of coarse straw-mat mulching is the most recommendable measure for establishing the vegetation cover with less soil erosion on the denuded gentle slopes in hillsides at present in Korea.

• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.578-587
• /
• 2015

Nuclear SSR (nSSR) and chloroplast SSR (cpSSR) markers were analyzed to assess the parameters of mating system in seed orchard, such as outcrossing rates, the number of potential pollen contributors, paternal contribution rates, degree of pollen contamination, and biparental inbreeding ($t_m-t_s$). In 2006, 2007, seeds were collected from the seed orchard of Pinus densiflora, established in 1977 at Anmyeon island. Estimates of outcrossing rates ranged from 94.9 to 100% (mean 98.9%) in 2006 and from 91.2 to 100% (mean 97.7%) in 2007 on the basis of the analysis of cpSSR haplotypes and from 90.3 to 100% (mean 95.9%) in 2006 and from 81.6 to 100% (mean 95.3%) in 2007 on the basis of the analysis of nSSR genotypes. By cross checking of both DNA markers, mean cumulative outcrossing rates of 100% and 98.9% were estimated in each year. Mean contamination rates were estimated as 48.9% and 42.4%, respectively. On the basis of cpSSR haplotype observed in each seed, paternal contribution rates (the number of pollen contributors) were estimated as 0.458 (mean 16.2) in 2006 and 0.512 (mean 14.8) in 2007. In conclusion, considering pretty high level of outcrossing rates observed in a seed orchard, there might be little to be influenced by inbreeding depression for genetic potential of the seeds induced by selfing. Estimates of the mating system parameters obtained from the two reproductive years were not statistically different, which revealed stable genetic quality of seeds produced in different years. Observed results from this study may provide useful information for the management and establishment of the seed orchard of the progressive generation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.3
• /
• pp.393-400
• /
• 2011

This study investigates the effects of a hangover beverage (MIX) that contains minerals (highly-salty mineral water, HSMW) and several medicinal plant extracts, on antioxidant and alcohol-metabolizing enzymes in alcohol administered Sprague-Dawley rats. HSMW is pumped from below the sedimentary rock layer of Dadaepo, Busan, South Korea, which is 1,050 m below the land surface; it tastes salty, like sea water. In terms of medicinal plant extracts, the total phenolic and flavonoid contents of Rubus coreanus and Cornus officinalis were measured as being significantly higher than those in Curcuma longa. The results suggest that treatment with MIX significantly increases superoxide dismutase (SOD) activity and DPPH radical scavenging activity. In the 10% HSMW-, for MIX- and company product (CP)-treated groups, the concentration of blood alcohol was significantly reduced 1~5 hr after alcohol loading, compared to that in the control group. In hepatic alcohol-metabolizing enzyme activities, alcohol dehydrogenase (ADH) activity was found to be higher in the MIX- and CP-treated groups than in controls, whereas acetaldehyde dehydrogenase (ALDH) activity was significantly higher in the CP-treated groups than other groups. This study concludes, therefore, that MIX (HSMW) minerals, like as Zn, Ca, Mg, Mn, and others stimulate alcohol-metabolizing enzymes, while the antioxidants of plant extracts prevent the damage otherwise incurred by alcohol toxicity. These results suggest that the hangover beverage (MIX) alleviates alcohol hangover symptoms by stimulating activities related to hepatic alcohol-metabolizing enzymes and antioxidant effects.

• Geophysics and Geophysical Exploration
• /
• v.9 no.4
• /
• pp.279-290
• /
• 2006

The borehole radar methods used to tunnel detection are mainly classified into borehole radar reflection, directional antenna, crosshole scanning, and radar tomography methods. In this study, we have investigated the feasibility and limitation of each method to tunnel detection through case studies. In the borehole radar reflection data, there were much more clear diffraction signals of the upper wings than lower wings of the hyperbolas reflected from the tunnel, and their upper and lower wings were spreaded out to more than 10m higher and lower traces from the peaks of the hyperbolas. As the ratio of borehole diameter to antenna length increases, the ringing gets stronger on the data due to the increase in the impedance mismatching between antennas and water in the boreholes. It is also found that the reflection signals from the tunnel could be enhanced using the optimal offset distance between transmitter and receiver antennas. Nevertheless, the borehole radar reflection data could not provide directional information of the reflectors in the subsurface. Direction finding antenna system had a advantage to take a three dimensional location of a tunnel with only one borehole survey even though the cost is still very high and it required very high expertise. The data from crosshole scanning could be a good indicator for tunnel detection and it could give more reliable result when the borehole radar reflection survey is carried out together. The images of the subsurface also can be reconstructed using travel time tomography which could provide the physical property of the medium and would be effective for imaging the underground structure such as tunnels. Based on the results described above, we suggest a cost-effective field procedure for detection of a tunnel using borehole radar techniques; borehole radar reflection survey using dipole antenna can firstly be applied to pick up anomalous regions within the borehole, and crosshole scanning or reflection survey using directional antenna can then be applied only to the anomalous regions to detect the tunnel.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.61-66
• /
• 2012

Chemical Mechanical Planarization (CMP) is a polishing process used in the microelectronic fabrication industries to achieve a globally planar wafer surface for the manufacturing of integrated circuits. Pad conditioning plays an important role in the CMP process to maintain a material removal rate (MRR) and its uniformity. For metal CMP process, highly acidic slurry containing strong oxidizer is being used. It would affect the conditioner surface which normally made of metal such as Nickel and its alloy. If conditioner surface is corroded, diamonds on the conditioner surface would be fallen out from the surface. Because of this phenomenon, not only life time of conditioners is decreased, but also more scratches are generated. To protect the conditioners from corrosion, thin organic film deposition on the metal surface is suggested without requiring current conditioner manufacturing process. To prepare the anti-corrosion film on metal conditioner surface, vapor SAM (self-assembled monolayer) and FC (Fluorocarbon) -CVD (SRN-504, Sorona, Korea) films were prepared on both nickel and nickel alloy surfaces. Vapor SAM method was used for SAM deposition using both Dodecanethiol (DT) and Perfluoroctyltrichloro silane (FOTS). FC films were prepared in different thickness of 10 nm, 50 nm and 100 nm on conditioner surfaces. Electrochemical analysis such as potentiodynamic polarization and impedance, and contact angle measurements were carried out to evaluate the coating characteristics. Impedance data was analyzed by an electrical equivalent circuit model. The observed contact angle is higher than 90o after thin film deposition, which confirms that the coatings deposited on the surfaces are densely packed. The results of potentiodynamic polarization and the impedance show that modified surfaces have better performance than bare metal surfaces which could be applied to increase the life time and reliability of conditioner during W CMP.