• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.262-269
• /
• 2016

Subway station scales are determined by peak predictions. In this study, the purpose behind the installation of a subway is public transportation convenience and public interest, but economic validity is also important. By proving that the scale of the station is excessive with regard to the target station size for Seoul subway Line 5-8, a reasonable plan. can be sought. According to station installation standards, the area of the station under investigation here is out of the service levels by six stages (A~F), and it must be four or more levels (D). The Actual level for the B level is a two-step design. The Actual ratio for over- Peak predictions is only 17.8% on average. The results of measurements of the excess area and determination of the excessive costs were analyzed by subdividing the area and by calculating it based on the B level, finding that it is possible to provide benefits for customers only in the current design, with an area ratio of 16.3%. Given the weight, it was estimated that current conditions can meet the needs of only 18.6% of the current area. Simplifying the scale calculation method of the station, it is convenient, safe, and advantageous to move citizens only if the scale can be streamlined. Then, with a reduced initial investment, maintenance costs during the operation can be reduced.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.1 no.1
• /
• pp.102-107
• /
• 2002

Purpose: The aim of this retrospective study were to report the short-term results of inferior capsular shift procedure using splitting subscapularis and capsule for the patients who had shoulder instability and were apt to recur after arthroscopic stabilization procedure. Materials & Methods : Fifteen cases of instability of the shoulder were included with an average follow-up of 2 years (range: 1$\~$3 years). There were 13 men and 2 women with an average age of 27years. Multidirectional instability was found in 4 cases, voluntary instability in 3 cases, bony Bankarte lesion in 2 cases and 6 cases were contact sportmen. Thirteen shoulders underwent the inferior capsular shifts and Bankart repairs and 2 shoulders without Bankart lesion underwent the inferior capsular shift only. Average 19 mm of shift (range: 10$\~$25 mm) was done. Results : Fourteen patients showed good and excellent results with one subluxation and one positive apprehension test. Postoperative ranges of motions did not change in forward elevation, external rotation at side and external rotation at 90$^{\circ}$ abduction (p>0.05). Conclusion : Inferior capsular shift procedure using splitting subscapularis and capsule can be helpful in shoulder instability patients who were high-risk group of recurrence with arthroscopic procedure.

• The KIPS Transactions:PartC
• /
• v.15C no.4
• /
• pp.273-280
• /
• 2008

In WSN(Wireless Sensor Network) many routing algorithms such as LEACH, PEGASIS and PEDEP consisting of sensor nodes with limited energy have been proposed to extend WSN lifetime. Under the assumption of perfect fusion, these algorithms used convergecast that periodically collects sensed data from all sensor nodes to a base station. But because these schemes studied less energy consumption for a convergecast as well as fairly energy consumption altogether, the minimum energy consumption for a convergecast was not focused enough nor how topology influences to energy consumption. This paper deals with routing topology and energy consumption for a single convergecast in the following ways. We chose major WSN topology as MSC(Minimum Spanning Chain)s, MSTs, PEGASIS chains and proposed LECSEN chains. We solved the MSC length by Linear Programming(LP) and propose the LECSEN chain to compete with MST and MSC. As a result of simulation by Monte Carlo method for calculation of the topology length and standard deviation of link length, we learned that LECSEN is competitive with MST in terms of total energy consumption and shows the best with the view of even energy consumption at the sensor nodes. Thus, we concluded LECSEN is a very useful routing topology in WSN.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.230-230
• /
• 2007

전력선 통신(Power Line Communication)은 최근 전력선을 이용한 통신기술의 발달과 더불어 세계적으로 관심도가 높아지고 연구 개발 및 자본 투자가 활발히 진행되고 있으며, 안정적인 네트워크를 구성하기 위해서는 고주파 전력선 통신 신호를 차단하는 블로킹 필터가 반드시 적용되어야 한다. 전력선 통신용 블로킹 필터는 광대역의 주파수 특성과 높은 신호감쇄 특성 및 대전류 특성이 요구되며, 이러한 특성을 구현하기 위해서는 블로킹 필터의 핵심부품인 자심재료의 고투자율 및 대전류화가 이루어져야 한다. 따라서 본 연구에서는 우수한 전 자기적 특성이 균일하게 유지되고, 전력선에 흐르는 대전류에 의한 자심재료의 포화가 발생하지 않도륵 새로운 자심 재료를 설계하여, 전력선 통신을 적용한 홈 네트워크 구축의 핵심 부품인 광대역 블로킹 필터를 개발하고자 하였다. 2350과 0.3 T의 투자율과 포화자속 밀도를 갖는 EI 형상의 자심재료를 해석모델로 설정하고 다중 에어 갭의 위치에 따른 전류와 자속밀도 변화를 유한요소 해석법으로 분석한 결과 자심재료의 대전류 특성에 지배적인 영향을 미치는 에어 캡의 삽입 위치를 알 수 있었고, 새로운 해석 모델인 I 형상의 로드(ROD) 코어에 대해 수치해석을 수행하여, 100A의 통전 전류에서도 자기적으로 포화되지 않고 인덕턴스의 정밀 제어가 가능하고, 특성의 신뢰성과 대전류에 대한 안정성을 증가시킬 수 있는 인덕터를 설계하였다. 또한 수동소자를 이용한 LC 공진회로를 기본 구성으로 하고, 주파수 대역, 신호 감쇄율과 대전류 특성, 상용화를 고려하여 블로킹 필터 회로를 설계하였으며, 유한요소해석법을 적용한 전자장 모의해석을 통하여 최소의 크기를 갖는 I 형상의 자심재료에 $6{\Phi}$의 에나멜 동선을 6.5턴, 6턴 권선하여 2.5, $2.15\;{\mu}H$의 인덕턴스를 갖는 직렬 인덕터를 구현하였고 블로킹 필터를 구성하였다. 주파수에 따른 신호감쇄 특성을 5 Hz~1 MHz의 주파수 범위에서 측정한 결과 약 490 kHz~450 kHz의 주파수 대역에서 -70dB의 신호감쇄 특성을 나타냈다. 본 연구를 통해 개발된 100A급 광대역 블로킹 필터가 적용되어 상용화 될 수 있을 것으로 판단되며, 또한 모뎀 통신 주파수 대역에서 -70dB 이상의 높은 감쇄 특성을 갖기 때문에 신호차단 특성이 보다 우수할 것으로 사료된다.

• The Journal of the Korea Contents Association
• /
• v.18 no.11
• /
• pp.493-507
• /
• 2018

This study examined characteristics and usefulness of middle-aged and older people's vocational training participation. Among sub-age groups categorized by the position in career cycle and the employability, 61~68 year old group(after retirement age group) had the biggest difficulties on the training including computer-based training and showed the lowest employment result compared to other sub age groups; major career(30~45), career transition preparation(46~52), career transition(53~60). However, the career transition age group utilized vocational training in the aspect of career search and the after-retirement age group in the aspect of preparation for older age and hobby. On the other hand, factors such as career adaptability and perceived education difficulties affected on the training usefulness in the aspects of career search and preparation for older age and hobby while perceived career barriers, career relevancy and relationship ability affected on the employment result. Based on these findings, this study suggests that vocational training provide more suited course for the boundaryless career seekers and include relationship enforcement and positive attitude development to overcome perceived career barriers for middle-aged and older people.

• The Journal of the Korean Institute of Forest Recreation
• /
• v.22 no.4
• /
• pp.35-48
• /
• 2018

This research was carried out to provide a good quality forest healing program as a basic source of development by researching the general characteristics of users of Geiji Mountain in North Jeolla Province, the recognition of forest healing and regional preference programs. As a result of the survey, Geigisan Mountain is used as a natural place for recreation and leisure of residents of Jeonju. The most important factors in the selection of forest healing programs for visitors were the activities, organization and chronology of the program, and the main purpose was to improve health. Week-by-week programs utilizing weekends were preferred for management of forest healing programs. It was revealed that sports programs prefer to enjoy natural scenery, forest experience programs, healing programs, forest therapy programs, meditation programs, and listening to forest music. The outcome of this study is expected to be used as a basic source for developing and researching a program for forest healing in the area of Mt. Meanwhile, the limit on the composition of suitable forest healing programs according to preference is required for continuous and continuous integrated study of the forest healing program for the future of the forest healing program.

• The Journal of the Korea Contents Association
• /
• v.22 no.5
• /
• pp.746-764
• /
• 2022

Communication breakdown has been mentioned causing a heavy burden for dementia caregivers. This study aims to inspect and structure the process and results of communication between people with dementia and their caregivers. The impeding/facilitating elements of communication are also extracted. Interviews with 21 of dementia care experts about the direct and indirect experiences of communication with people with dementia were analyzed based on the grounded theory. Results show that combination of the cognitive and communication decline of the people with dementia, confusing environment and caregivers' inappropriate attitude and lack of communication skills leads to communication breakdown and relations severance. Minimal contacts and task-oriented conversation results in conflicts and people with dementia's increasing agitation, anxiety and violent behaviors while understanding of individuality and listening with heart lead to recovered lucidity in the state of serious dementia, recovered pleasure and voluntary participation in the daily activities for people with dementia. Core paradigm was defined as 'Person Centered Care through relation formation'. There are 4 types of communication with people with dementia : partnering, patronizing, conflicting, avoiding types. Researchers suggest that Person Centered based communication skills be educated and trained for dementia caregivers.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.3
• /
• pp.103-110
• /
• 2022

The purpose of this study is to experimentally evaluate the stiffness and strength reduction according to the reinforcing bar details of the vertically divided reinforced concrete shear walls. To confirm the effect of reducing strength and stiffness according to vertical division, four real-scale specimens were fabricated and repeated lateral loading tests were performed. As a result of the experiment, it was confirmed that the strength and stiffness were decreased according to the vertical division. In particular, as the stiffness reduction rate is greater than the strength reduction rate, it is expected that safety against extreme strength can be secured when the load is redistributed according to vertical division. As a result of checking the crack pattern, a diagonal crack occurred in the wall subjected to compression control among the divided walls. It was confirmed that two neutral axes occurred after division, and the reversed strain distribution appeared in the upper part, showing the double curvature pattern. In future studies, it is necessary to evaluate the stiffness reduction rate considering the effective height of the wall, to evaluate additional variables such as wall aspect ratio, and to conduct analytical studies on various walls using finite element analysis.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.5
• /
• pp.407-416
• /
• 2018

The development of modern technology has rapidly grown the field of wearable devices. Wearable equipments should satisfy low power consumption and small/lightweight because of characteristics of body wearing. In this paper, an overview of wearable equipments is explained, and wearable device market is investigated. In addition, we investigate developed technology of wearable components, which is divided into component and communication technology. Meanwhile, a smart HSE system is required to meet the demand of the society for the serious industrial accident. To address this issue, we propose an interactive method between the wearable component and the HSE system, which are expected to be effective in safety management. As a detailed case study, a risk scenario is made with risk factors in welding workshop, and then we propose an interactive method between a wearable component and an HSE system that can reduce the risk. This proposed method is useful to achieve high level of worker's safety.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.5
• /
• pp.417-425
• /
• 2018

This paper proposes a safety management method that extracts ETA (event tree analysis) based scenario and combines ICT technology to reduce serious disasters occurring workplace for shipbuilding and offshore plant. The statistics of Safety and Health Agency and (previous)Ministry of Public Safety and Security show that the most frequent accident among the serious disasters related to shipbuilding and offshore plant is falling. The main cause of accidents is absence of a safety belt and safety belt ring. To solve these problems, we create ETA based scenarios to derive results based on safety considerations. Based on these results, we propose a solution by applying ICT technology for accident prevention. Deriving ETA based scenarios and ICT technology, the proposed solutions include a system for detecting the wearing of safety belts and safety helmets, a system for detecting whether or not the safety belts are connected, and a hook system for measuring safety distances. These safety related systems can reduce the probability of death of workers. By preventing accidents using the proposed method, we can reduce serious disasters in shipbuilding and offshore plant and establish systematic safety management.