Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Stiffness Reduction Effect of Vertically Divided Reinforced Concrete Shear Walls Under Cyclic Loading

반복하중을 받는 수직분할된 철근콘크리트 전단벽의 강성저감효과

  • 황보동선 (한양대학교 건축공학과) ;
  • 손동희 (한양대학교 건축공학과) ;
  • 배백일 (한양사이버대학교 디지털건축도시공학과) ;
  • 최창식 (한양대학교 건축공학과)
  • Received : 2022.04.19
  • Accepted : 2022.06.23
  • Published : 2022.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study is to experimentally evaluate the stiffness and strength reduction according to the reinforcing bar details of the vertically divided reinforced concrete shear walls. To confirm the effect of reducing strength and stiffness according to vertical division, four real-scale specimens were fabricated and repeated lateral loading tests were performed. As a result of the experiment, it was confirmed that the strength and stiffness were decreased according to the vertical division. In particular, as the stiffness reduction rate is greater than the strength reduction rate, it is expected that safety against extreme strength can be secured when the load is redistributed according to vertical division. As a result of checking the crack pattern, a diagonal crack occurred in the wall subjected to compression control among the divided walls. It was confirmed that two neutral axes occurred after division, and the reversed strain distribution appeared in the upper part, showing the double curvature pattern. In future studies, it is necessary to evaluate the stiffness reduction rate considering the effective height of the wall, to evaluate additional variables such as wall aspect ratio, and to conduct analytical studies on various walls using finite element analysis.

본 연구의 목표는 수직분할된 철근콘크리트 전단벽의 철근상세에 따른 강성 및 강도 저감에 대해 실험적으로 평가하는 것이다. 본 연구에서는 수직분할에 따른 강도 및 강성 저감효과를 확인하기 위해 실 스케일 실험체 4개를 제작하여 반복 횡가력 실험을 수행하였다. 실험결과, 수직분할에 따라 강도 및 강성이 감소되는 것을 확인하였다. 특히 강도 저하율보다 강성 저하율이 큼에 따라 수직분할에 따른 하중 재분배 시 극한강도에 대한 안전성을 확보할 수 있을 것으로 기대된다. 균열양상을 확인한 결과, 분할된 벽체 중 압축지배를 받는 벽체에서 사인장 균열이 발생하였기 때문에 강도 평가 시 휨 강도 뿐만 아니라 전단저항 메커니즘을 같이 고려해야 한다. 벽체 단면 수직철근의 변형률 분포 분석 결과, 분할 후 두 개의 중립축이 발생하며 상부에서는 반전된 변형률 분포가 나타나 이중 곡률을 갖는 벽체의 양상을 보였다. 추후 연구에서는 벽체의 유효높이를 고려한 강성 저감률 평가가 필요하며 추가로 벽체 형상비 등 추가 변수에 대한 평가 및 유한요소해석을 이용한 다양한 벽체에 대한 해석적 연구가 필요하다.

Keywords

Acknowledgement

이 연구는 국토교통부 주거환경연구사업 중 "저비용·고효율의 노후 공동주택 수직증축 리모델링 기술개발 및 실증" 과제(21RERP-B099826-07)의 지원 및 2021년도 정부 (과학기술정보통신부) 연구비 지원에 의한 결과의 일부임. (과제번호 : NRF-2020R1A4A1019074)

References

  1. Cho, U., Kim, S. Y., Bae, B. I., and Choi, C. S. (2020), Evaluation of Flexural Performance of Reinforced Concrete Shear Walls According to Flexural Retrofit by Wall End Excavating, Journal of the Architectural Institute of Korea Structure & Construction, 36(4), 123-133. https://doi.org/10.5659/JAIK_SC.2020.36.4.123
  2. Kim, S. Y., Cho, U., Chung, J. H., Bae, B. I., and Choi, C.S. (2021), Seismic Performance of Existing RC Structural Walls Retrofitted in Flexure by Wall End Plate. Sustainability, 13.
  3. Choi, C. S., Bae, B. I., Bae, S., and Son, D. H. (2022), Flexural retrofit of existing reinforced concrete structural walls with various boundary element details under cyclic loading. Journal of Building Engineering, 52, 104468. https://doi.org/10.1016/j.jobe.2022.104468
  4. Ireland, M. G. (2007), The Development of a Selective Weakening Approach for the Seismic Retrofit of Reinforced Concrete Structural Walls. ME Thesis. Department of Civil Engineering, University of Canterbury, Christchurch.
  5. Bae, B. I., Choi, Y. C., Choi, C. S., and Choi, H. K. (2010), Shear Strength Reduction Ratio of Reinforced Concrete Shear Walls with Openings, Journal of the Korea Concrete Institute, 22(4), 451-460. https://doi.org/10.4334/JKCI.2010.22.4.451
  6. Committee ACI. Building code requirements for structural concrete (ACI 318-19) and commentary. Farmington Hills, MI: American Concrete Institute; 2019.
  7. ACI 374.2R-13. Guide for testing reinforced concrete structural elements under slowly applied simulated seismic loads. ACI committee 374; 2013.
  8. KS F 2405. Standard test method for compressive strength of concrete. Korean Standard Information Center; 2010.
  9. KS F 2403 Standard test method for making concrete specimens. Korean Standard Information Center; 2019.
  10. KS B 0802. Method of tensile test for metallic materials. Korean Standard Information Center; 2013.
  11. KS B 3504 Steel bars for concrete reinforcement. Korean Standard Information Center; 2021