• Journal of the KSME
• /
• v.30 no.6
• /
• pp.542-547
• /
• 1990

가스터빈은 브레이턴사이클을 이용한 것으로서 피스톤 왕복엔진과 함께 동력기관으로써 지금까지 사용되고 있으며 특히 경량, 고출력의 장점으로 인해 항공기 엔진의 추진기로서 많이 사용되고 있다. 1905년 프랑스에서 압축비 4.8회전수 4250rpm으로 40HP의 출력을 내는 현재와 같은 형 태의 가스 터빈을 개발한 이후 많은 발달과 함께 2차 대전 후에는 항공용 뿐만 아니라 발전용, 동력용 등 산업용 엔진에도 응용되었다. 세계적으로는 유럽이 가스 터빈에 관한 연구를 미국보 다 앞서 활발히 진행하였으며 1957년 General Electric사의 F-4팬텀에 사용된 J-79터보 제트 엔진을 개발함으로써 가스터빈 엔진분야에 미국이 주도권을 잡게 되었고 많은 전문회사가 가스 터빈 엔진설계 제작에 참여하고 있다. 이와 같이 가스 터빈에 대한 개발연구가 계속 이루어진 것은 가스 터빈이 다른 동력기관 보다 단위 중량당 많은 출력을 낼 수 있고, 각 요소들이 회전 운동을 함으로써 고속운전을 할 수 있고, 부하 변동에 빨리 적응하며, 마찰부분이 적어 윤활유 소비가 적은 장점들이 있기 때문이다. 본 글에서는 이와 같은 가스 터빈 연구개발의 국내외 현황 및 그 전망에 대해서 기술하고자 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.96-102
• /
• 1991

절삭가공의 목적은 소재의 불필요한 부분을 chip으로 제거하여 소요의 형상 치수인 새로운 표면을 만들어 내는 것이다. 실제 가공에서 소요되는 동력을 보면 대부분은 chip을 만들어 내는데 소비되기 때문에 chip의 특성은 절삭가공에 있어서 극히 중요한 인자가 되는 것이다. 본 연구에서는 많이 사용되고 있는 throw away 공구에서의 칩 브레이커의 성능을 향상시키기 위하여 실험을 통하여 기존에 사용되고 있는 공구들의 성능을 평가하고 문제점을 제시한다.

• The Magazine for Energy Service Companies
• /
• s.3
• /
• pp.20-23
• /
• 2000

대구시에서는 지난해 말 에너지 소비절약의 일환으로 에너지소비량이 많은 시 산하 21개 공공기관에 대하여 ESCO사업 타당성 정밀진단을 실시했다. 13개 업체의 진단결과를 토대로 대구시는 13개소의 조명분야사업과 8개소의 동력설비사업을 계획하고 있다. 최근 소방본부 산하 4개 기관에서 고효율 조명기기 개체공사 계약을 체결해 다른 기관에 사업이 확대될 것으로 기대된다.

• The Magazine for Energy Service Companies
• /
• s.65
• /
• pp.14-17
• /
• 2010

건물이나 공장에서 흔히 볼 수 있는 기계 중의 하나가 유체 기계인 펌프와 송풍기다. 이러한 기계의 회전수를 제어할 수 있는 방법으로 인버터가 있다. 이는 어떤 신호를 받아 주파수를 변화시켜 유체기계의 회전수를 변화시킴으로 소비동력을 줄여주는 에너지 절감 시스템이다. 목포해양대학교 실습선 사례를 통해 인버터 구동방식에 의한 실습선 냉각수 펌프의 에너지 절감 방법을 알아본다.

• Journal of Drive and Control
• /
• v.11 no.4
• /
• pp.53-60
• /
• 2014

This paper proposes a control scheme to reduce the power consumption of a variable displacement swash-plate type piston pump supplying oil to a valve-controlled hydraulic cylinder at constant pressure. Whenever flow rate demand was absent, the swash plate angle and the pump speed were changed to the minimum values required to compensate for the internal leakage flow. In response to command signals, the pump speed was changed in proportion to the absolute mean value of the speed component for position commands. At the same time, a pressure regulator was activated to maintain constant system pressure by precisely adjusting the pump speed with the swash plate angle fixed at the maximum. The conventional system consisting of a pressure-compensated variable displacement type pump is driven at a constant speed of 1,800rpm. By comparison, computer simulation and experimental results showed that idling power at stand-by status could be reduced by up to 70% by reducing the pump speed from 1,800rpm to 300rpm and the swash plate angle to the minimum.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.1
• /
• pp.37-44
• /
• 2014

For testing a two-wheeled vehicle's per-charge range, this study conducted road and chassis dynamometer driving tests. Three typical road routes within Daejeon Metropolitan City were selected for the road-driving test. In the case of CVS-40 mode driving tests using a chassis dynamometer, various road-loading conditions were set. In this study, two-wheeled electric vehicles' per charge range on the road was confirmed through testing, and the range and energy consumption efficiency depending on various chassis dynamometer road load settings were measured. Then, the results of the actual road driving tests were compared with those of the chassis dynamometer driving tests, and road load settings that yielded per-charge range testing results similar to those under actual road driving conditions in the chassis dynamometer experiments were studied.

• Microbiology and Biotechnology Letters
• /
• v.16 no.4
• /
• pp.282-286
• /
• 1988

Growth kinetic parameters for mass cultivation of Chinese Hamster Ovary (CHO) cells are estimated by measuring oxygen uptake rates. It Is found that there is strong correlation between cell growth and oxygen consumption, showing that correlation factor is 0.83. Derived linear model predicts actual cell density very well. It tells that oxygen uptake rate can play important role in indirectly measuring cell density when conventional method of estimating cell density is no longer meaningful due to heavy cell clumpings. Cell yield per oxygen consumption, $Y_{\chi}o$ and mass transfer coefficient for oxygen, Ka are also estimated as 1.26$\times$10$^4$cells/mmole $O_2$ consumed and 1.01/h, respectively. Average specific growth rate over all runs is 2.891/day for CHO cells with producting 2 grams of tPA per day under continuous perfusion operations.

• Journal of Power System Engineering
• /
• v.18 no.2
• /
• pp.25-30
• /
• 2014

In this paper, the heat transfer coefficient and pump consumption power of indirect refrigeration system using $CO_2$ as a secondary refrigerant were investigated experimentally. First, from the comparison of pump consumption powers of existing brines(EG, PG, EA etc.) and $CO_2$ as secondary refrigerants at the same experimental conditions, PG and $CO_2$ show the highest and lowest power, respectively. Second, the heat transfer coefficient of $CaCl_2$ is the highest, but PG is the lowest among other secondary refrigerants. From the above results, it is confirmed that $CO_2$ as the secondary refrigerant has excellent characteristics when comparing to existing brines. Thus, it is concluded that $CO_2$ is applicable as the secondary refrigerant of indirect refrigeration system.

• Journal of Power System Engineering
• /
• v.16 no.3
• /
• pp.16-21
• /
• 2012

Biodiesel is technically competitive with or offers technical advantages over conventional petroleum diesel fuel. Biodiesel is an environmentally friendly alternative liquid fuel that can be used in any diesel engine without modification. In this study, to investigate the effect of fuel injection timing on the characteristics of performance with DBF in DI diesel engine. The engine was operated at five different fuel injection timings from BTDC $6^{\circ}$ to $14^{\circ}$ at $2^{\circ}$ intervals and four loads at engine speed of 1800rpm. As a result of experiments in a test engine, maximum cylinder pressure is increased with leading fuel injection timing. Specific fuel oil consumption is indicated the least value at BTDC $14^{\circ}$ of fuel injection timing.

• Journal of Power System Engineering
• /
• v.16 no.2
• /
• pp.60-65
• /
• 2012

Pneumatic actuators are clean, lightweight, and can be easily serviced, whereas low energy efficiency has been considered as a critical shortcoming compared with corresponding hydraulic and electrical actuators. This study describes a new design method of pneumatic cylinder driving apparatus by lowering a supply pressure. The simulation study demonstrates that the designed system with the proposed method can operate at the smaller energy consumption state compare to the designed system with the conventional method for the specified working conditions.