• 제목/요약/키워드: 동력 분기

검색결과 27건 처리시간 0.024초

분포종동력을 받는 외팔 송수관의 안정성에 관한 연구 (Study on the Stability of Cantilevered Pipe Conveying Fluid Subjected to Distributed Follower Force)

  • 공창덕;박요창
    • 한국항공우주학회지
    • /
    • 제33권4호
    • /
    • pp.27-34
    • /
    • 2005
  • 본 연구에서는 분포 종동력을 받는 외팔 송수관의 안정성에 대하여 연구하였다. 지배 운동 방정식은 확장 해밀턴의 원리에 의해 유도 되었으며, 유한 요소법에 의해 수치해석이 이루어 졌다. 다양한 질량비에 대하여 분포 종동력 값에 따른 임계 유속 값을 결정하였다. 임계 유속에서의 플러터 모드 형상의 차수를 결정하기 위하여 1/12의 주기로 그려, 질량비에 따른 임계 유속의 그래프에 있어서 플러터가 발생하는 고유치 분기의 차수와 함께 명기하였다. 또한 내부감쇠가 시스템의 안정성에 미치는 영향을 조사하였다.

지역냉방을 위한 아이스슬러리 시스템의 수송 및 분기 특성 (Ice slurry transporting and branching characteristics for the district cooling)

  • 이상훈;유호선;이윤표;이창준;권혁민
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2009년도 하계학술발표대회 논문집
    • /
    • pp.662-667
    • /
    • 2009
  • The research are performed to check the characteristics of the ice slurry transport system for the district cooling. The system are installed at the 1st floored building which is as large as the $1204\;m^2$ ($86\;m{\times}14\;m$), and the pumping power and branching characteristics are measured by transporting of the ice slurry. The ice slurry transporting pipe is as long as 200 m. For the same cooling load, the higher IPF is, the lower the transporting flow rate and the pumping power are. But when the IPF is higher than 15%, no less decrease of the pumping power does happen. For the branching characteristics, through the branch pipe where the flow resistance is higher, the higher IPF is measured. A little higher IPF is measured at the thermal expansion branch.

  • PDF

유성기어 효율을 고려한 입력분기 기반 하이브리드 전기자동차의 동력전달 효율 해석 (Analysis of Powertrain Efficiency for Input Split Type Hybrid Electric Vehicle considering Planetary-gear Efficiency)

  • 김정민
    • 한국자동차공학회논문집
    • /
    • 제23권5호
    • /
    • pp.508-514
    • /
    • 2015
  • In this paper, the powertrain efficiency is analyzed for the input split type hybrid electric vehicle. For considering the powertrain loss, the power loss models of planetary gear and motor are applied. And, the mathematic equations of powertrain speed and torque are found by using the lever analogy. With the above models and equations, the powertrain efficiency is analyzed for the 0 to 180 km/h vehicle velocity range. From the analysis results, it is found that the transmission efficiency with the power loss of planetary gear is smaller maximum 2.1% than the transmission efficiency without the power loss of planetary gear.

입력분기방식 하이브리드 전기자동차의 구동계 구조에 따른 동력 성능 비교 분석 (Comparative Study of Different Drive-train Driving Performances for the Input Split Type Hybrid Electric Vehicle)

  • 김정민
    • 한국기계가공학회지
    • /
    • 제16권4호
    • /
    • pp.69-75
    • /
    • 2017
  • In this study, the performances of five input split type hybrid electric vehicle sub-drivetrains were analyzed. The five sub-drivetrains consist of chain, helical gears and planetary gears. For the analyzing above five sub-drivetrains, the mathematical equations were derived. From the analysis, we found that the sub-drivetrain with chain shows slower acceleration performance and larger energy consumption on the city driving. And, the sub-drivetrain with only helical gear shows smallest energy consumption on the city driving. If the sub-drivetrain can change its gear speed, it shows fastest acceleration performance, but it has largest energy consumption on the city driving due to its additional auxiliary components.

끝단질량을 갖는 송수관의 고유치 분기와 플러터 모드 (Eigenvalue Branches and Flutter Modes of Pipes with a Tip Mass Conveying Fluid)

  • 류봉조;류시웅;빈산길언;임경빈
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2003년도 춘계학술대회논문집
    • /
    • pp.665-669
    • /
    • 2003
  • The paper deals with the relationship between the eigenvalue branches and the corresponding flutter modes of cantilevered pipes with a tip mass conveying fluid. Governing equations of motion are derived by extended Hamilton's principle, and the numerical scheme using finite element method is applied to obtain the discretized equations. The order of branches and unstable modes associated with flutter are defined in the stability maps of mass ratios of the pipe and the critical flow velocity. As a result, the relationship between the flutter related to the eigenvalue branches and the flutter modes are investigated thoroughly.

  • PDF

2004년 디지털콘텐츠 시장결산.10대 뉴스

  • 한국데이터베이스진흥센터
    • 디지털콘텐츠
    • /
    • 12호통권139호
    • /
    • pp.30-49
    • /
    • 2004
  • 다사다난했던 2004년이 저물고 있다. 결코 쉽지 않았던 기업환경 속에서 올 디지털콘텐츠 시장은 성장기조를 이은 것으로 드러났다. 하지만 경기한파에 아랑곳 않은 곳이 있었는가 하면 사상 최대의 침체기를 겪은 곳도 있어 업종별, 기업별로 명암이 엇갈렸다. 또한 모진 풍파를 이기기 위한, 혹은 견디다 못한 M&A 바람도 거셌던 한해였다. 업계관계자들은‘내년이 국가경제 신성장동력으로서의 제몫을 다할 수 있을지를 가늠할 분기점이 될 것’으로 보고 있다. 희망과 절망이 한데 어우러졌던 2004년 디지털콘텐츠 업계를 되돌아봤다.

  • PDF

로드휠의 슬립을 고려한 군용 궤도차량의 조향특성에 관한 연구 (The Steering Characteristics of Military Tracked Vehicles with Considering Slippage of Roadwheel)

  • 임원식;윤재섭;강상욱
    • 한국자동차공학회논문집
    • /
    • 제17권2호
    • /
    • pp.57-66
    • /
    • 2009
  • In this paper, the steering characteristics of tracked vehicles are studied for the improvement of steering performance. The important design factor of military vehicles is high mobility. It is influenced by weight of a vehicle, engine capacity, power-train, and steering system. The military vehicle, which is equipped with caterpillar, has unique steering characteristics and is quite different from that of a wheeled vehicle. The steering of tracked vehicles is operated in the power pack due to different speeds of both sprockets. Under cornering conditions, power split and power regeneration are happened in the power pack. In case of power regeneration, power is transferred outside track after adding engine power and power inputted inside track from the ground. However, excessive power regeneration is transferred in the power pack. It damages mechanical elements. Therefore, it is necessary to analyze the steering system and check mentioned problem above. In this study, the detailed dynamic model of steering system is presented, which includes slippage between track and roadwheel, inertia force, and inertia moment. Finally, our model is compared with the Kitano model and we verified the validity of the model.

입력 분기식 하이브리드 동력전달계의 구조별 성능 분석 (Analysis of the Influence of an Architecture on Vehicle Performances)

  • 양호림;김남욱;조성태;임원식;차석원
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2006년도 추계학술대회
    • /
    • pp.109-112
    • /
    • 2006
  • In the recent studies, various types of multi mode electric variable transmission for hybrid electric vehicle have been proposed. Multi mode electric variable transmission consists of two or more different type planetary gear hybrid powertrain system(PGHP), which can change its power flow type by means of clutches for improving transmission efficiencies. Generally the power flows can be classified into three different types such as Input split, output split nd compound split. In This paper, we present velocity and torque equations of the input-split powertrain and analyze its optimal Performances. There are six combinations of the input-split powertrain, each combination has various lever length. We find optimal planetary gear ratios for fuel economy and acceleration performance, and compare performances of each combination.

  • PDF

동력 분기/순환 구조를 갖는 회전기계의 정성적 성능해석 (Performance Prediction of Rotating Machinery Having Power Split/Circulaled Transmission)

  • 조한상;이동준;이장무;박영일;임원식
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1994년도 추계학술대회 논문집
    • /
    • pp.953-957
    • /
    • 1994
  • A performance prediction method is presented in this paper for design of a rotating machinery having power split/circulated transmisson with slip elements and planetary gears. And internal power flow patterns of such systems are theoretically analyzed by using mathematical modeling. To estimate usefulness of the designed machinary, geometrical approach has been adopted through the performance locus diagram which represents overall characteristics of the system. This gives us complect prediction of the qualitative performane and effects of design factors such as system layout, types and gear ratios of planetary gears and disign parameters of slip elements. The results for one of them are compared with experimental ones using dynamometer for verification.

  • PDF

소형궤도열차 시스템 설계 (System Design of Personal Rapid Transit)

  • 정락교;김연수;조봉관
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
    • /
    • pp.1107-1108
    • /
    • 2006
  • 본 논문에서는 교통 분야의 새로운 미래 성장동력분야 창출로 Global Standard도출하여 세계시장 선점 및 진출하자는 거대한 목표에 따라 IT기반의 네트워크 운행제어 시스템을 바탕으로 차량, 전력, 분기, 선로구축물 등의 하부시스템의 각종방식을 비교 및 검토하여 열차 시스템에 부합되게 선정하는 시스템설계를 수행하였다. 본 소형궤도열차시스템은 전세계적으로 영업운행 중인 노선이 없고, 운영 및 설계개념, 시스템 구성 등도 나라마다 상이하여 시스템의 개념정립을 통한 개발목표 사양(안)을 결정하는데 크게 참고가 될 만한 해외시스템이 많지 않은 실정이다. 따라서 본 연구에서는 이와 같이 제한된 참고자료와 경량전철시스템 기술개발사업에서 축적된 시스템엔지니어링 기술을 활용하여 첨단성, 친환경성, 경제성을 갖춘 소형궤도열차 시스템의 설계를 수행하였고 시스템을 구성하는 하부시스템을 정의하였다.

  • PDF