• 제목/요약/키워드: 동력흐름

검색결과 102건 처리시간 0.028초

해수교환을 고려한 진동수주형 파력발전구조물에서 불규칙공기흐름에 관한 수치해석 (Numerical Simulation of Irregular Airflow in OWC Wave Generation System Considering Sea Water Exchange)

  • 이광호;박정현;조성;김도삼
    • 한국해안·해양공학회논문집
    • /
    • 제25권3호
    • /
    • pp.128-137
    • /
    • 2013
  • 최근, 지구온난화와 대기오염 등에 의해 신재생에너지에 관한 관심이 증가해 왔다. 특히, 가까운 미래에 직면하게 될 화석에너지자원의 고갈문제는 이와 같은 신재생에너지 기술을 가속화 시키고 있다. 다양한 재생가능 에너지자원 중에서 지구의 3/4을 점유하고 있는 해양은 막대한 에너지를 보유하고 있다. 본 연구에서는 항내 수질개선과 파랑에너지의 이용이라는 두 목적을 달성하기 위하여 공기실 내에서 해수면의 상하운동을 공기흐름으로 변환하고, 이를 터빈의 구동력으로 이용하는 파력발전장치인 진동수주형(OWC, Oscillating Water Column) 파력발전시스템을 적용한 해수교환구조물을 제시한다. 또한, 3차원불규칙파수치파동수로에 기초한 3D-NIT(3-Dimensional Numerical Irregular wave Tank)모델을 불규칙파동장에 적용하여 산정된 공기실 내 수위변동의 시간변화로부터 공기흐름속도를 추정하고, 입사주파수스펙트럼의 변화에 따른 공기흐름 주파수스펙트럼의 변화특성, 구조물의 존재여부에 따른 공기실 위치에서 주파수스펙트럼의 변화특성, 구조물에 의한 파랑변형율의 변화특성 및 공기흐름과 유체흐름에 의한 동력 등을 검토한다. 이로부터 공기실 내에서 수위변동 및 공기흐름의 시계열 자료에서 위상차가 존재하며, 유체흐름에 의한 동력이 공기흐름에 의한 동력에 비해 미흡하다는 것을 알 수 있었다.

확장된 네트워크기법을 이용한 정유압 기계식 번속장치의 동력전달 특성해석 (Analysis of Power Transmission Characteristics for Hydro-mechanical Transmission Using Extended Tetwork theory)

  • 김원;정순배;김현수
    • 대한기계학회논문집A
    • /
    • 제20권5호
    • /
    • pp.1426-1435
    • /
    • 1996
  • In this paper. a network theory for generaltransmission systme was extended considering the direction of power flow. Also, a modified network model was suggested for a node with 4 shafts in order to verify the power flow. Based on the extended network theory, a simulation program was developed to analyze a hydro-mecaanical tranmission(HMT) system consistion of two hydrostatic pump motors, severeal planetary gear trains steer differential gear. The simulation result showed that the extendednotwork analysis program develped can predict the power circulation as well as the magnitude of torque and speed for each transmission element and can be used design tool for genaral power transmission system.

북한의 임농복합경영을 위한 관개시설 구축방안 (A plan on construction of irrigation facilities for agroforestry in DPRK)

  • 지달님;김관호;최강원
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2020년도 학술발표회
    • /
    • pp.176-176
    • /
    • 2020
  • 본 연구는 북한의 식량난과 산림복구의 일환으로 추진되고 있는 임농복합경영의 현주소를 파악하고 북한의 임농복합경영이 가지는 대표적인 문제점이자 한국농어촌공사에서 접근할 수 있는 기술분야인 관개시설의 구축방안에 초점을 두어 해결방안을 모색하고자 하였다. 특히 임농복합경영 대상지의 경우, 산지를 개간하여 경사도 30° 이하의 경사지를 이용하고 있기 때문에 이 경우 토성이 사질 혹은 식질이 많아 보수력이 평지에 비해 크게 떨어지고 유효수분이 있는 토심도 낮기 때문에 가뭄 및 한발피해에 취약하다. 한발 시 관개를 위해 필요한 저수규모를 설정하기 위해서 강릉 안반데기와 영월 조전지구에서 산정한 단위용수량을 근거로 저수규모를 결정하였다. 계곡물이나 빗물은 자연흐름식 등의 방법으로 동력을 사용하지 않고도 집수할 수 있지만 하천이나 지하수를 퍼올려야 할 경우는 동력이 필수적으로 요구되기 때문에 대체에너지 활용을 고려하는 것이 필요하다. 따라서 임농복합경영을 위한 관개분야에 대한 대책으로 복합 취수원에 따라 하천, 지하수, 계곡, 빗물 등으로 구분하고 그에 따른 주요시설과 사업비를 산출하였다. 북한에서는 임농복합경영을 위한 경제성이 있는 규모로 50ha를 제안하고 있어 50ha규모의 임농복합경영 관수시설 부분에 대한 제안과 북한이 추진하고 있는 임농복합경영은 대부분 외부 지원에 의존하고 있기 때문에 지원의 용이성 및 가능성을 고려하여 10ha의 규모 역시 제안하였다. 50ha의 규모일 때 주요시설은 취수보, 양수장, 암반관정, 저수조, 물탱크, 송수관로, 급수관로, 급수대, 팜폰드, 둠벙, 배수로, 농로 등이며 수원공은 하천, 계곡, 지하수, 빗물이다. 동력은 태양광, 풍력으로 저수규모는 저수조에 2,000톤(40%여유수량), 팜폰드 및 둠벙에 800톤(60%여유수량)을 확보하였다. 10ha의 규모일 때 주요시설은 저수조, 물탱크, 급수관로, 팜폰드, 둠벙, 배수로, 농도 등이며 수원공은 빗물이다. 동력은 경사차를 이용한 자연흐름식 집수 방식으로 무동력이다. 본 연구는 향후 남북관계 개선시 우선 지원사업의 하나로 활용이 가능하다는데 의의가 있다. 50ha의 규모에 제시된 동인 태양광 및 풍력의 경우도 지속적인 유지관리 비용이 들지 않지만 초기 설치비가 높기 때문에 경제성이 있는 관개시스템을 개발할 필요가 있다.

  • PDF

진동 동력 흐름 예측 기법을 이용한 소음 전달 경로 해석 및 차량의 실내소음저감에 관한 연구 (A Study on Noise Transfer Path Analysi for Sound Improvement of Vehicle Using the Vibrational Power Flow)

  • 이상권
    • 한국자동차공학회논문집
    • /
    • 제9권2호
    • /
    • pp.168-175
    • /
    • 2001
  • Reduction of structure-borne noise of the compartment in a car is an important task in automotive engineering. Transfer path analysis using vibroacoustic reciprocity technique or multiple path decomposition method has generally been used for structure-borne noise path analysis. These methods are useful in solving particular problem but do net quantify the effectiveness of vibration isolation of each isolator of a vehicle. To quantify the effectiveness of vibration isolation, the vibrational power flow has been used for a simple isolation system or a laboratory based isolation system. It is often difficult to apply the vibrational power flow technique to the complex isolation system like a car. In this paper, a simple equation is derived for calculation of the vibrational power flow of an isolation system with multiple isolators such as a car. It is successfully applied to not only quantifying the relative contributions of eighteen isolators but also reducing structure-borne noise of a passenger car. According to the results, the main contributor of eighteen isolators is the rear roll mount of an engine. The reduced structure-borne noise level is about 5dBA.

  • PDF

세라믹 압전체에 부착된 판 스프링의 유한요소해석과 질량 흐름 제어에 관한 연구 (A Study on Mass Flow Control and FEA of Plate Spring Attached in Piezoelectric Ceramic)

  • 이상경;김영수
    • 동력기계공학회지
    • /
    • 제7권4호
    • /
    • pp.61-66
    • /
    • 2003
  • In this paper, the relation between displacement of piezoelectric material and electric field was proposed. FEA was introduced to predict the displacement and reaction force of plate spring attached in the piezoelectric material. The relation between displacement of piezoelectric material forced by plate spring and applied electric field were further verified by experimental investigation. Also, the flow rate of gas in piezoelectric valve was examined by experiment. Finally, the relation between electric field and gas flow was derived. Based on these results, these relations can be used in the design of mass flow controller.

  • PDF

8단 자동변속기의 유성기어 가공을 위한 동력 흐름 해석 (2) : 4-8단 (Power Flow Analysis for Manufacturing of Planetary Gears in an 8-speed Automatic Transmission (II): 4-8 Speeds)

  • 이경진;김정민
    • 한국기계가공학회지
    • /
    • 제15권5호
    • /
    • pp.57-65
    • /
    • 2016
  • The power flow of an 8-speed automatic transmission was analyzed using a lever analogy for the manufacturing of planetary gears. From the analysis, we found that the engine power was split between the first and second double-pinion planetary gears (DPPG1 and DPPG2), and was then passed to the DPPG3 for the fourth speed. For the fifth speed, the engine power was split between the DPPG1 and DPPG3. For the speeds 6-8, the engine power was passed only to SPPG2, while the seventh speed contained the power circulation.

질량흐름 제어기의 센서 튜브에서 열전달현상에 관한 연구 (A Study of Heat Transfer Phenomena in a Sensor Tube of a Mass Flow Controller)

  • 이상경;김영수
    • 동력기계공학회지
    • /
    • 제7권3호
    • /
    • pp.35-39
    • /
    • 2003
  • In this paper, the heat transfer phenomena in the sensor tube of a mass flow controller(MFC) were studied by experiments. In the sensor tube of MFC, the difference of temperature between inlet and outlet was necessary for calculating the mass flow rate. Therefore, the relations of flow rate, generated heat by heating wire, sensor location and tube thickness were investigated to find the optimized condition. Based on this study, static and dynamic characteristics of sensor can be used for mass flow controller.

  • PDF

압전체로 구동되는 질량흐름 제어기에서 레이놀즈 방정식을 이용한 유량 특성 연구 (A Study of Flow Characteristics using Reynold's Equation on Mass Flow Controller Actuated by Piezoelectric Material)

  • 이상경;김영수
    • 동력기계공학회지
    • /
    • 제7권3호
    • /
    • pp.69-73
    • /
    • 2003
  • In this paper, the relation between displacement of piezoelectric disk and electric field was proposed. From Navier-Stokes equation and Reynold's equation, the relation between flow and gap of plate was determined. This models were further verified by experiments. Based on theoretical study and experimental verification, the proposed model between flow rate and voltage can be used in the design of mass flow controller in gas supplying system.

  • PDF

세계 각국의 전차의 발전추세 (2)

  • 박성원
    • 국방과기술
    • /
    • 4호통권182호
    • /
    • pp.58-71
    • /
    • 1994
  • 제2차 세계대전이후 화력향상, 기동력 증대 방어력 보강 등에 중점을 두어 전차 개발이 이루어졌는데, 이런 흐름의 집대성이 독일의 Leopard, 미국의 M1, 영국의 Challenger의 등장으로 나타났다.

  • PDF