• Journal of Drive and Control
• /
• v.17 no.4
• /
• pp.113-124
• /
• 2020

Most of the work of construction equipment and agricultural machinery is done in off-road conditions. Autonomous driving required in these conditions uses GPS sensors, and PID controllers to control their speed and position. The hydrostatic steering, which is composed of a PSU, hydraulic hoses, and cylinders, rather than a mechanical coupling is used in these equipments. The PSU plays a key role in hydrostatic steering. Precise control of the position under various conditions requires detailed behavioral analysis of the basic components and operation. Two Gerotor PSU is now a commonly used safer option. The components of the PSU can be divided into mechanical and hydraulic actuating elements by its behavior. Since the system is combined by mechanical and hydraulic elements, the modelings are performed using Amesim, which is one of the most effective for the multi-domain dynamic system analysis. To confirm the validity of the model, input torque and pressures are checked with varying steering speed. The opening and the steering speed of normal and newly designed control valve set is investigated with the effect of centering spring force and friction. Finally, simulation results with fully detailed model with two gerotors are analyzed and compared with simple model.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.202-208
• /
• 2013

This paper describes establishment of a pilot training plan, training and an outcome for Human Powered Aircraft which can take off, landing and fly using the energy generated by only human muscle without using mechanical power. To achieve these, a special trainer made a plan by considering physical trait of each pilot and each pilot was performed an indoor training for principle physical improvement, an outdoor training for generating sustainable power, a simulation training to learn maneuver ability. The pilot mastered the basic maneuver ability needed to fly and each pilot was lose their weight and experienced their improved physical strength via the training.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1483-1488
• /
• 2005

As the development of microprocessor technology, electric power steering(EPS) system which uses an electric motor came to use a few years ago. It can solve the problems associated with hydraulic power steering. The motor only operates when steering assistance is needed, so it can save fuel and can reduce weight and cost by eliminating hydraulic pump and piping. As one of performance criteria of EPS systems, the transmissibility from road wheel load to steering wheel torque is considered in this paper. The transmissibility can be studied by fixing the steering wheel and calculating the torque needed to hold the steering wheel from road wheel load. A proportion-plus-derivative control is needed for EPS systems to generate desired static torque boost and avoid transmissibility of fluctuation. A pure proportion control can' satisfy both requirements.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.165-170
• /
• 2009

Pressure ripple, vibration and noise level are measured in each parts of the power steering system. MD(Mahalanobis Distance) is calculated by using MTS(Mahalanobis Taguchi System) with measured data, and noise sensitive components are selected. The components applied detail design parameters are made and data is measured. After that MD is calculated also. Mean value and SN ratio can be obtained from the MD. Effective noise reduction technique and dominant design parameters in hydraulic power steering system are introduced.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.11
• /
• pp.65-74
• /
• 2002

This paper examines the usefulness of a Brake Steer System (BSS), which uses differential brake forces for steering intervention in the context of Intelligent Transportation Systems (ITS). In order to help the car to turn, a yaw moment can be achieved by altering the left/right and front/rear brake distribution. This resulting yaw moment on the vehicle affects lateral position thereby providing a limited steering function. The steering function achieved through BSS can then be used to control lateral position in an unintended road departure system. A 8-DOF nonlinear vehicle model including STI tire model will be validated using the equations of motion of the vehicle. Then a controller will be developed. This controller, which will be a PID controller tuned by Ziegler-Nichols, will be designed to explore BSS feasibility by modifying the brake distribution through the control of the yaw rate of the vehicle.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.6 s.249
• /
• pp.684-690
• /
• 2006

This study proposes and validates a new column type electric power steering system (EPS-TT). It is driven by a uni-directional motor and two electro-magnetic clutches. The assist motor produces assist torque in only one direction and two clutches transmit the torque to the column of steering system in either left or right direction with respect to the steering input. A full order and a reduced order models are developed to evaluate the EPS-TT. Models are also used to investigate the vehicle responses. A PID control logic is designed to control the torque of the assist motor. A driver model is applied to the system and the resulting performances are analyzed. The results show that the performances of the full order model are similar to those of reduced order model. The results also prove that the performances achieved by the EPS-TT are improved compared to those of a conventional EPS-TT across the frequency domain.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.164-172
• /
• 2001

Various HILS systems for developing and testing vehicle mechatronic systems have been proposed and constructed during the last few years. However, performance of those systems have not been evaluated in a systematic way. Based on the transfer function approach, this paper presents a method far evaluating performance such as stable dynamic simulation range of a proposed steering HILS system. In the evaluation, we have investigated effects of time delays that exist in the real-time dynamic simulation, additional actuators, and data transmission on the stable dynamic simulation range, simulation frequency range, and steering feel. This evaluation methodology may be useful to help engineers develop a HILS system for their own purposes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.817-818
• /
• 2009

• Transactions of Materials Processing
• /
• v.18 no.5
• /
• pp.385-391
• /
• 2009

An adhesively bonded power steering cylinder with a steel tube and an aluminum bracket was developed to reduce the weight of steering systems. To achieve the joint strength between the steel tube and of the aluminum bracket, the shape aluminum bracket re-designed by using the FE-analysis. Fracture behavior of the adhesive layer was considered by a cohesive zone model(CZM), which is based on the two-parameter fracture phenomenon with critical stress and fracture toughness. From the result of FE-analysis with CZM, re-designed power steering cylinder satisfied the desired joint strength for axial and torsion modes. And its joint strength was verified by the fracture test in each mode.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.337-338
• /
• 2008

2008년 현재 우리나라는 10%의 인구가 60세 이상인 이른바 고령사회에 접어들었다. 노인 인구의 증가로 인해 노인이 여가생활 또는 일반생활을 보조하기 위한 보행 보조기에 대한 관심이 증가되고 있다. 대부분 동력이 없는 보행보조기를 사용하고 있으며 이러한 기구는 경사로 공간 또는 힘이 약한 노인들에게 취약성을 가지고 있다. 이에 동력형 보행보조로봇에 관심이 증가하고 있다. 동력형 보행보조로봇 역시 경사로에 있어서 편리성과 안전성을 높이기 위한 연구가 필요한 실정이다. 이에 본 논문에서는 보행보조로봇이 경사로에 진입 하였을 경우 기울어진 경사로의 정도를 인식하여 모터를 제어 한다. TILT 센서를 이용하여 기울이짐 정도를 측정 하였고, 또한 로봇의 전류 실시간으로 체크하여 로봇의 안전성을 향상 하였다. 제어 시스템 구성은 사용자의 보행의지를 파악하기위해 FSR 센서를 부착하여 조향장치로 사용하였으며, 경사로를 인식하기 위해 Liquid 타입의 TILT 센서를 사용하였으며, 모션 제어를 위해 DSP를 사용하였다. 본 제어 시스템을 보조보행로봇에 적용하였을 때, 보행보조로봇이 오르막 경사로에 진입시 기존보다 힘을 적게 사용하여 경사로를 진행하였으며, 경사로에서 브레이크 작동속도가 향상 되었다. 또한 내리막 경사로에서는 모터의 힘을 적게 사용하고 중력의 힘을 사용하여 이를 통해 전류의 소비량을 개선 하였다.