• 제목/요약/키워드: 동력분류

검색결과 119건 처리시간 0.028초

2K-H II 형식 복합형 무단변속기의 효율실험 (Performance Efficiency of Compound CVTs with a 2K-H II)

  • 박재민;김연수;이상희;최상훈
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 추계학술대회 논문집
    • /
    • pp.670-673
    • /
    • 2005
  • We designed the compound CVT (Continuously Variable Transmissions) by combining power circulation mode CVT and power split mode CVT, which have been proposed for connecting 2K-H II differential gear to the V- belt type CVU (Continuously Variable Unit), as an input coupled type. With the designed compound CVT, we carried out theoretical analysis and performance experiments. We proved that the compound CVT had a better performance than either of the power circulation mode or power split mode.

  • PDF

LANDSAT MSS 영상에 의한 자연 소택지의 식생분류 (Vegetation Classification in Natural Swamp Area Using LANDSAT MSS)

  • 지광훈;강필종;조명희
    • 대한원격탐사학회지
    • /
    • 제2권1호
    • /
    • pp.13-21
    • /
    • 1986
  • The study was emphasized on the applicability of Landsat data for vegetation classification of touch as small natural swamp areas Yujeon natural swamp in Haman-gun through image processing system. The image processing technique which was applied is maximum likelihood method. The classified types on the Landsat image are water, nelumbo, grass, agricultural field and conifer. The computer processed classification was compared the existed data for evaluating the result, but there are some difficulties on the exact comparison between them because of discordance of the temporal resolution. The result, anyhow, is quite remarkable that Landsat MSS data can be used for the quantitative estimates of vegetation type classification in such small area.

미취업자 분류의 잠재노동력 차별성 검정 (Heterogeneity Tests of the Potential Labor Force among Not-employed in Korea)

  • 박명수
    • 노동경제논집
    • /
    • 제43권4호
    • /
    • pp.117-141
    • /
    • 2020
  • 새로 분류된 잠재노동력을 유휴노동력에 포함시켜 산출한 고용보조지표와 실업률의 차이를 밝히기 위해 미취업자를 실업자, 잠재노동력 및 이외 비노동력으로 분류하고 노동시장 행태를 분석하여 분류 간 차별성 여부를 파악하였다. 노동시장 상태간 연간 이행률을 토대로 노동력 진입 및 이탈 행태에서 잠재노동력은 이외 비노동력과 다르며 일하려는 욕구가 작지 않은 유휴노동력임을 확인하였다. 인적 특성을 통제한 다항로짓모형 분석 결과는 잠재노동력과 실업자가 동일 집단이라는 가설을 기각하여 고용보조지표와 실업률을 동일 관점에서 해석할 수 없다는 것을 확인하였다.

  • PDF

IoT(Internet of Things) 정보보호 기술 개발 방향

  • 원유재
    • 정보와 통신
    • /
    • 제32권1호
    • /
    • pp.24-27
    • /
    • 2014
  • 기존의 사이버 환경의 보안 기술은 단순히 데이터, 네트워크, 시스템을 보호함으로써 인간의 자산을 보호하는 차원의 기술이었다면, IoT 환경에서 보안 기술은 궁극적으로 사물들로부터 사람을 보호하는 기술로 패러다임의 변화가 예상된다. 따라서 본고에서는 미래의 새로운 성장동력으로 부상하고 있는 사물인터넷(IoT) 서비스 활성화를 지원하는 동시에 인간의 자산과 생명을 보호하기 위하여 정부차원에서 수립한 정보보호 기술 개발 계획을 정리한다. IoT 정보보호 기술은 디바이스, 네트워크, 서비스/플랫폼의 3개 계층으로 나누어 9개 원천기술로 분류하였다

소형 열병합발전의 제도 및 경제성분석

  • 이진홍
    • 한국에너지공학회:학술대회논문집
    • /
    • 한국에너지공학회 1993년도 추계학술발표회 초록집
    • /
    • pp.49-56
    • /
    • 1993
  • 열병합 발전이란 한가지의 에너지원을 열원으로 하여 2가지 이상의 동력을 회수하는 방법을 말하며 회수에너지는 고급에너지인 전기가 주가 되고 이 때 발생되는 폐열은 회수하여 증기, 난방용 온수, 냉방용 냉수로 이용할 수 있어 총 효율이 70 ∼ 80%에 달하는 방식이다. 열병합 발전은 규모에 따라 목동열병합과 같은 쓰레기 소각로 이용형, 분당, 일산 등과 같이 지역난방과 연결할 수 있는 가스터빈, 증기터빈 조합형인 복합 열병합형의 대형열병합과 각 산업체 공장에서 전기 및 공장 Process 증기 생산을 주목적으로 하는 중형 열병합과, 조선호텔, 신라호텔, 상공회의소등과 같이 Hotel, 병원, 사무실 등에서 주로 이용하는 소형 열병합으로 분류할 수 있다. (중략)

  • PDF

전남지역 해양산업 분석 연구

  • 김화영;김운수
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2018년도 춘계학술대회
    • /
    • pp.131-132
    • /
    • 2018
  • 해양산업은 새로운 부가가치산업 및 신성장동력 산업으로 인식되고 있다. 특히 항만을 중심으로 클러스터를 조성하여 고부가가치를 창출하고 있다. 해외 선진항만들도 앞 다투어 클러스터를 조성하여 수익창출과 경쟁력 강화에 나서고 있다. 우리나라도 2015년 해양산업클러스터 조성과 육성에 관한 법률을 제정하였다. 따라서 각 지역별로 어떤 해양산업이 비교우위에 있는지 파악하는 것은 해양산업클러스터를 통한 집적화 전략을 수립하는데 매우 중요하다. 따라서 본 연구에서는 남지역을 대상으로 해양산업 구조를 분석하였다. 먼저 해양산업 분류에 대한 기존 문헌분석을 실시하여 해운 물류업, 조선업, 수산업, 해양관광업, 기타업 5개의 대분류와 21개 중분류, 84개 소분류로 해양산업을 재분류하였다. 재분류한 해양산업을 기준으로 입지계수와 변이할당분석 기법을 활용하여 전남의 해양산업 구조를 분석하였다. 이 연구결과는 향후 전남지역 해양산업클러스터 구축 시 전략수립에 기초자료로 활용할 수 있을 것이다.

  • PDF

산소 전달 특성에 미치는 이젝터 구동 노즐 면적비에 따른 혼합 분류의 영향 (Effect of Mixed Jet with Primary Nozzle Area Ratio of Ejector on Oxygen Transfer Characteristics)

  • 박상규;양희천
    • 한국분무공학회지
    • /
    • 제27권3호
    • /
    • pp.126-133
    • /
    • 2022
  • The objective of this is to experimentally investigate the effect of mixed jet on the oxygen transfer characteristics with the primary nozzle area ratio of an annular nozzle ejector for the application of a microbial fuel cell. A direct visualization method with a high speed camera system was used to capture the horizontal mixed jet images, and a binarization technique was used to analyze the images. The clean water unsteady state technique was used for the oxygen transfer measurement. The air-water mixed jet discharging into a water tank behaved similar to a buoyancy or horizontal jet with the primary nozzle area ratio. It was found that an optimum primary nozzle area ratio was observed where the oxygen transfer performance reached its maximum value due to the decrease of air volume fraction and the increase of jet length and air bubble dispersion.

딥러닝 기반 시추장비 이상 예측 및 진단 모델 개발 연구 (A Study on the Development of Anomaly Detection Prediction Model for Deep Learning-Based Drilling Equipment)

  • 한동권;김민수;권순일;최정호
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2021년도 춘계학술발표대회
    • /
    • pp.404-407
    • /
    • 2021
  • 석유개발 현장에서 시추장비의 고장으로 인한 장비교체 및 시추시간 증가는 막대한 비용소모를 발생시킨다. 본 논문은 딥러닝 기반의 시추장비 중 드릴비트의 동력을 구동시키는 디젤엔진의 고장 요소를 분류하고 이 요소에 따른 고장여부를 판별하는 딥러닝 기반의 이상 예측 및 진단 모델을 개발하였다. 또한 제안한 모델의 우수성을 확인하기 위해 로지스틱 회귀분석 분류모델과의 예측성능 비교분석도 수행하였다.

국내 플랫폼 기업 현황 분석과 시사점: 플랫폼 기업 유형 분류를 중심으로

  • 김주희;진현서;김도현
    • 한국벤처창업학회:학술대회논문집
    • /
    • 한국벤처창업학회 2022년도 춘계학술대회
    • /
    • pp.141-152
    • /
    • 2022
  • 국내 경제를 포함한 글로벌 경제에서 플랫폼 기업이 지니는 중요성이 매우 커지고 있다. 많은 연구에서도 플랫폼 기업이 이끄는 디지털 경제를 통해 혁신이 창출되고 이들이 경제 성장의 동력으로 작동한다는 것을 강조하고 있다. 하지만, 플랫폼 기업에 대한 모호한 정의로 인해, 플랫폼 기업이 자리잡고 있는 플랫폼 생태계에 대한 정확한 현황 파악이 제대로 이루어지지 않고 있는 실정이다. 이에 본 연구는 플랫폼 기업에 대한 정의를 내리고 플랫폼 기업의 유형을 분류하고자 하였다. 더불어 플랫폼 생태계의 현황에 대한 분석을 통해 향후 생태계의 발전과 활성활르 위한 정책적 제언을 제시하고자 하였다.

  • PDF

디젤 분무와 천연 가스 분류의 거동 특성에 관한 기초 연구 (A Basic Study of the Behavior Characteristics of Diesel Spray and Natural-gas Jet)

  • 염정국;김민철
    • 동력기계공학회지
    • /
    • 제13권6호
    • /
    • pp.13-21
    • /
    • 2009
  • This basic study is required to examine spray or jet behavior depending on fuel phase. In this study, analyses of diesel fuel(n-Tridecane, $C_{13}H_{28}$) spray and natural gas fuel(Methane, $CH_4$) jet under high temperature and pressure are performed by a general-purpose program, ANSYS CFX release 11.0, and the results of these are compared with experimental results of diesel fuel spray using the exciplex fluorescence method. The simulation results of diesel spray is analyzed by using the combination of Large-Eddy Simulation(LES) and Lagrangian Particle Tracking(LPT) and of a natural gas jet is analyzed by using Multi-Component Model(MCM). There are two study variables considered, that is, ambient pressure and injection pressure. In a macroscopic analysis, the higher ambient pressure is, the shorter spray or jet tip penetration is at each time after start of injection. And the higher injection pressure is, the longer spray or jet tip penetration is at each time after start of injection. When liquid fuel is injected, droplets of the fuel need some time to evaporate. However, when natural gas fuel is injected, the fuel does not need time to evaporate. Gas fuel consists of minute particles. Therefore, the gas fuel is mixed with the ambient gas more quickly at the initial time of injection than the liquid fuel is done. The experimental results also validate the usefulness of this analysis.

  • PDF