• 한국인터넷방송통신학회논문지
• /
• 제21권1호
• /
• pp.115-120
• /
• 2021

본 논문에서는 비례공진 전류제어기 기반의 단상 영구자석 동기전동기의 운전 알고리즘을 제안하였다. 일반적으로 단상 영구자석 동기전동기의 경우 회전자의 형상에 따른 비대칭 공극이 발생할 수 있으며, 이는 고속 운전시 소음과 진동의 원인이 된다. 따라서 본 논문에서는 제어 안정성이 뛰어난 비례공진 전류제어기를 적용한 단상 영구자석 동기전동기의 운전 알고리즘을 제안하였다. 비례공진 전류제어기법은 정상상태 오차가 없고 왜란에 대해 비교적 강인한 특성을 가지고 있으며, 복잡한 연산과정 없이 교류입력의 정상상태를 제거할 수 있다. 제안한 알고리즘의 유효성과 타당성을 실험을 통해 검증하였다.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.32-39
• /
• 2001

This paper presents the synchronous vibration control of a rotor system using an Active Air Bearing(AAB). In order to suppress the synchronous vibration, it is necessary to actively control the air film pressure or the air film thickness. In this study, active pads are used to control the air film thickness. Active pads are supported by the pivots containing piezoelectric actuators and their radial positions can be actively controlled by applying voltage to the actuators. Disturbances and various kinds of external force can cause the shaft vibration as well as the change of the air film thickness. The dynamic behaviors of a rotary system supported by two tilting-pad gas bearings and its active stabilization using the tilting-pads as actuators are investigated numerically. The PID controller is applied to the tilting-pad gas bearing system with three pads, two of which contain piezoelectric actuators. To test the vapidity of the theoretical method, the performance of this control method is evaluated through experiments. The experimental results show the effectiveness of the control system for suppressing the unbalanced response of the rigid modes.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 추계학술대회 논문집
• /
• pp.229-230
• /
• 2012

본 논문에서는 왜곡된 역기전력을 갖는 매입형 영구자석 동기전동기의 토크리플 저감 방법을 제안한다. 역기전력에 왜곡성분이 있는 경우 정현파 전류로 모터 제어 시 역기전력의 왜곡으로 인한 토크리플은 전동기의 진동 증대 및 효율 저하의 요인이 된다. 이러한 토크리플에 의한 전동기의 진동은 특히 저속에서 문제가 된다. 저속운전 시 전동기의 토크리플을 저감하기 위해서는 역기전력의 왜곡에 의한 토크리플을 줄일 수 있는 토크리플 보상 전류제어가 필요하다. 이 경우 토크리플 보상전류를 구하기 위해서는 역기전력의 왜곡성분에 대한 정보가 필요하다. 본 논문에서는 역기전력의 왜곡성분을 off_line 방식이 아닌 전류기반 MRAS 관측기를 사용하여 실시간으로 추정하여 토크리플 저감전류를 보상함으로써 토크리플을 저감한다. 제안된 토크리플 저감 알고리듬은 시뮬레이션을 통해 검증한다.

• 한국소음진동공학회논문집
• /
• 제15권4호
• /
• pp.499-505
• /
• 2005

In this paper, a new type of pi+ezoelectric stepping motor is designed, manufactured and tested. This motor is composed of piezoelectric torsional actuator and a pair of one-way clutch bearings. The torsional actuator consists of 16-polygonal tube of piezoceramic that can produce an angular displacement associated with shear mode. One-way clutch bearing converts oscillation of torsional actuator into a continuous stepping rotation. The proposed stepping motor does not require any conversion mechanism for stepping motion like any other motors. In the design process, the shear resonance mode of piezoelectric actuator is analyzed by using a commercial finite element analysis program, and the performance of the fabricated torsional actuator is measured. $0.124^{\circ}$ of maximum angular displacement is measured in square wave excitation on the actuator only. The stepping motor is manufactured by assembling a pair of one-way clutch bearings and the torsional actuator. The maximum rotation speed of 72rpm and the blocking torque of 3.136 mNm are measured at 3540 Hz and 100V/mm. Once the proposed piezoelectric stepping motor is miniaturized, it can be used for many compact and precise moving applications.

• 대한기계학회논문집A
• /
• 제26권4호
• /
• pp.711-719
• /
• 2002

This paper presents the synchronous vibration control of a rotor system using an active air bearing(AAB). In order to suppress the synchronous vibration, it is necessary to actively control the air film pressure or the air film thickness. In this study, active pads are used to control the air film thickness. Active pads are supported by pivots containing piezoelectric actuators and their radial position can be actively controlled by applying voltage to the actuators. Thus, disturbances, i. e. various kinds of external force can cause shaft vibration as well as change of the air film thickness. The dynamic behavior of a rotary system supported by two tilting-pad gas bearings and its active stabilization using the tilting-pads as actuators are investigated numerically. The $\mu$ synthesis are applied to the AAB system with three pads, two of which contain piezoelectric actuators. To test the validity of the theoretical method, the performance of this control method is evaluated through experiments. The experimental results also show the effectiveness of the control system for suppressing the unbalanced response of the rigid modes.

• 한국소음진동공학회논문집
• /
• 제13권5호
• /
• pp.348-356
• /
• 2003

Active vibration control algorithms for the compensator and proto-type testing system have been developed for the suppression of vibrations from the reciprocating engines. At first, the developed algorithm determines optimal control vibration phases by detecting vibration responses of the engine without and with compensator, and then performs the continuous optimal control functions by tracking the change of the vibration frequency and phase. This algorithm is comparatively simple. robust for the external excitations and needless of supplementary operation since the control process is serially carried out. To validate the performance of compensator and algorithm, testing system including excitation device are constructed and tested, and the reductions of vibration levels are observed over than 80 % of the uncontrolled levels at various frequency ranges.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.297-297
• /
• 2010

이 논문에서는 음향 임피던스를 제어하는 능동형 소음 제어 방법을 연구하였다. 음향 임피던스 제어는 기존의 적응 제어 알고리즘 대신 임피던스의 크기 및 위상 최적화를 통하여 닫힌 관의 끝단에 음파의 반사를 최소화 하는 임피던스를 계산하고 제어함으로써 소음을 저감시킨다. 그리고 음향 임피던스 제어 방법을 끝단이 개방되어 있고, 중앙에 스피커가 있는 관에 적용시킨다. 이 경우에는 개방된 음장에서 음향 전달이 최소화하기 위한 임피던스를 계산하고, 음향 임피던스 제어를 통한 소음 저감을 확인한다. 이를 위해 스피커, 마이크로폰, 진동측정용 레이저 바이브로미터, 그리고 능동 소음 제어 하드웨어로 구성된 시스템을 구축하고 검증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.772-775
• /
• 2005

Most engineers, related to soil and civil dynamic field, have been interested in the direct dynamic design of building transmitted from soil and rock to structure due to blasting. However it is not easy to estimate the dynamic response of structures due to blasting by using analytical method because of difficulties of soil modeling, prediction of excitation force and so on. In this paper, dynamic analysis have been performed to predict vibration level and evaluate dynamic safety of structure adjacent to tunnel blast and the semi empirical method, which is based on vibration measurement data, has been employed to consider blast vibration characteristics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.163-168
• /
• 2007

A light railway operationis an effective means to solve a traffic problem of the city however, noise and vibration is pollution happened. This paper studied noise and vibration pollution of a light railway operation in order to let a decrease. The study range was only track condition and civil engineering structure condition. The way how we decrease noise and vibration in a protection vibration track, ballasted track, non-ballasted track, floating track trends was devoted is long rail laying, low vibration track lying. It was the most economic that the examination results track section a complement, and it was proved that a certain way.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.439-443
• /
• 2006

In this paper, a design of milli-gripper using piezoelectric actuator and flexible hinge structure has been suggested, and the dynamic characteristics of the milli-gripper has been analysed and improved. The milli-gripper consists of the operating and amplifier parts, and the perfomance of the gripper be heavily influenced by base excitation disturbances. The dynamic characteristics of milli-gripper has been measured by the FRF based on experimental modal analysis. It has been found by a series of experiments that the performance of the milli gripper using PID control is made a remarkable improvement in terms of gripping forces.