• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12C
• /
• pp.1623-1632
• /
• 2004

In this paper, we analyze the performance of linear search and bit reversal search algorithms based on the single-dwell serial search for rapid UWB (Ultra Wide Band) signal acquisition in typical indoor wireless channel environments. Simulation results according to bin spacing and frame interval in IEEE 802.15 Task Group 3a UWB indoor wireless channels show that bit reversal search algorithm achieves much smaller normalized mean acquisition time than linear search algorithm. In particular, it is found that the normalized mean acquisition time of the bit reversal search according to the range of searching termination interval closely matches the ideal case. In addition, we observe that the acquisition performance of bit reversal search algorithm becomes much better as bin spacing gets finer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7A
• /
• pp.635-640
• /
• 2002

We investigate optimal and suboptimal decision rules for parallel code acquisition in chip asynchronous direct-sequence spread-spectrum systems. The conventional decision rule for parallel acquisition is to choose the largest correlator output of a receiver. However, such a scheme is optimum only for chip synchronous models. In this paper, an optimal decision rule is derived based on the maximum-likehood criterion for chip asynchronous models. A simpler suboptimal decision rule is also discussed. The performance of the optimum and suboptimum decision rules is compared to that of the conventional decision rule. Numerical results show that, for chip asynchronous models, both the optimal and suboptimal decision rules outperform the conventional decision rule.

• The Journal of the Korea Contents Association
• /
• v.7 no.1
• /
• pp.147-154
• /
• 2007

In this paper, we propose a new parallel search algorithm to acquire synchronization for UWB(Ultra Wideband) systems that reduces computation of the correlation. The conventional synchronization acquisition algorithms check all the possible signal phases simultaneously using multiple correlators. However it reduces the acquisition time, it makes high power consumption owing to increasing of correlation. The proposed algorithm divides the preamble signal to input the correlator into an m-bit bunch. We check the result of the correlation at first stage of an m-bit bunch data and predict whether it has some synchronization acquisition information or not. Thus, it eliminates the unnecessary operation and save the number of correlation. We evaluate the proposed algorithm under the AWGN and the multi-Path channel model with MATLAB. The proposed parallel search scheme reduces number of the correlation 65% on the AWGN and 20% on the multi-path fading channel.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.10
• /
• pp.39-46
• /
• 1999

In this paper, we propose new hardware architecture of a fast searcher for an initial code acquisition in wideband CDMA wireless local loop systems. The proposed searcher uses double-dwell serial search algorithm and has N active correlators for the high performance code acquisition. Since the N active correlators are designed with pipelined architecture, it is possible to reduce the hardware complexity with only one energy calculation. Our architecture is designed using VHDL to meet wideband CDMA wireless local loop standard and verified under JTC wideband channels. Average code acquisition time of the proposed fast searcher which has 16 correlators is about 40 seconds in case of initial installation and 0.16 seconds when a base station is known. The verified fast searcher is synthesized with in $0.6\mu\textrm{m}$ LG library. The synthesized searcher has 15.8K rates when the number of 4he correlators is 16.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.3-9
• /
• 2013

This paper proposes a selective-weighted energy detection (S-WED) and a synchronization algorithm appropriate for it in IR-UWB system. Energy detectors that are practical in terms of implementation are employed widely for noncoherent reception in IR-UWB systems. However, they show low performance due to using the energy samples captured at symbol rate. For this reason, weighted energy detectors are developed to improve the performance of EDs. Hence, for WED, not only synchronization but also the weight coefficients are needed to be obtained prior to data detection. Meanwhile, the optimal weighting coefficients of WEDs are known to be energy values. Therefore, synchronization and the weighting coefficients can be obtained simultaneously. This paper proposes an S-WED and a simple synchronization algorithm for it in which sub-intervals having energies under a certain level are excluded in energy accumulation resulting in a simpler WED with a bit performance increase in low SNR region. The proposed algorithm is verified through simulations using the preamble symbol and channel models defined in the IEEE 802.15.4a.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7C
• /
• pp.688-695
• /
• 2003

In this paper, the parallel sub-filter searching structure to be adapted that divides a filter into several sub filters and the parameter decision technique to control adaptive parameters with power of received signal in the code acquisition system using adaptive filter are proposed. The numerical results for the system probabilities are derived that the code acquisition system using parallel sub-filter searching structure is statistically analyzed. Also, characteristic of the parameters in adaptive code acquisition system is analyzed by simulations and the parameter decision technique through SNRc estimation is explained. The system with parallel sub-filter searching structure outperforms by 1∼l.5 dB for 16 taps, 5∼6 dB for 64 taps. And the system with parameter decision technique works efficiently with the reasonable degree of degradation about 1 ∼2.5dB for 16 and 32 taps.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9A
• /
• pp.874-881
• /
• 2008

This paper presents an automatic frequency control algorithm for RTLS DS-SS modem based on the standard of ISO/IEC 24730-2. The presented automatic frequency control algorithm consists of frequency acquisition mode and frequency tracking mode, and the frequency acquisition mode is divided into the angle estimation step for frequency offset estimation and the verification step for removing the angle ambiguity. In the angle estimation step, three different sub-bit angles are estimated according to the timing intervals, then the estimates are used to re move the angle ambiguity in the verification step. The theoretical analysis and the simulation results of the proposed frequency control algorithm are presented.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.5
• /
• pp.45-53
• /
• 2007

To recover transmitted signal perfectly at DTV receiver, we have to acquire carrier frequency synchronization to compensate pilot signal which located in wrong position and rotated phase. Also, we need a symbol timing synchronization to compensate sampling timing error. Conventionally, to synchronize symbol timing, we use Gardner's scheme which used in multi-level signal. Gardner's scheme is well known for its sampling the timing error signal from every symbol and it makes easy to detect and keep timing sync in multi-path channel. In this paper, to discuss the problem when the received power level is out of range and we cannot get synchronization information. With this problem, we use 2 step procedures. First, we put a received signal power compensation block before Garder's timing error detector. Second, adaptive loop filter to get a fast synchronization information and averaging loop filter's output value to reduce the amount of jitter after synchronization in PLL(Phased Locked Loop) circuit which is used to get a carrier frequency synchronization and symbol timing synchronization. Using the averaging value, we can estimate offset. Based on offset changing ratio, we can adapt adaptive loop filter to carrier frequency and symbol timing synchronization circuit.

• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.343-349
• /
• 2006

In order to enhance the robustness against noisy environment, the previous GPS initial synchronization method of DGPS reference stations adopts not only the coherent integration method but also the non-coherent integration method. However the previous GPS initial synchronization method muses the non-coherent integration loss, which is a dominant factor among the signal acquisition losses in noisy environment. And the non-coherent integration loss increases with the strength of noise signal. In this paper, a novel GPS initial synchronization method is proposed for robust DGPS reference stations in noisy environment. This paper presents that the proposed GPS initial synchronization method suppresses the non-coherent acquisition loss. Furthermore, with regard to the mean acquisition time, it is shown that the number of the search cells of the proposed GPS initial synchronization method is much smaller than that of the previous GPS initial synchronization method Finally, through the simulation by the GPS simulator, it is seen that the GPS signal of nigh signal-to-noise ratio can be acquired under increased noise floor using the proposed GPS initial synchronization method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8C
• /
• pp.742-753
• /
• 2005

In this paper, we propose a rapid and reliable signal acquisition scheme for UWB (Ultra Wide Band) systems in typical indoor wireless channels. The proposed scheme is a two-step search with different thresholds and search window applied to a single correlator, where each step utilizes the single-dwell search with the bit reversal. Simulation results in IEEE 802. I5 Task Group .3a UWB indoor wireless channel show that the proposed scheme for the LHWB signals can achieve significant reduction of the required mean acquisition time as compared to the conventional single-dwell bit reversal search and double-dwell bit reversal search with more complex structure employing two correlators for various threshold levels. In addition, it is also observed that the proposed scheme can achieve much faster and reliable signal acquisition in noisy environments.