• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.312-317
• /
• 2014

In this paper, I propose the design technology of LLC resonant converter for the xenon flashlamp that is used to the solid state laser. Through the fabrication of 1.5kW large scale LLC resonant converter, the discharge characteristics are carried out, and introduce the new control method for limiting inrush current by the abrupt load current changes. The mathematical modeling for the lamp discharge includes the internal loss and lamp parameters. I propose the optimal method for the driving conditions of xenon flashlamp from the simulation results comparing the real measurements.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.423-426
• /
• 2001

In this paper, an electronic step-down transformer with output voltage stabilization characteristics is presented. The proposed electronic transformer has some advantages and features as follows: 1) It has 40 % weights lighter than that of commercial magnetic transformer, 2) It has output voltage stabilization characteristic with regulated output voltage over input variations, 3) It cab be operated as circuit breaker in the case of emergency, 4) It can be operated with so called soft starting function. Moreover, the electronic transformer may have stand-by power cutoff function and act as distortion compensator. This paper show the circuit diagram and present its features through various PSPICE simulations.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.5
• /
• pp.238-245
• /
• 2001

During an AC motor's start-up accelerating period, a large amount of current is required to reach to the rating speed. This is called in-rush current. This peak in-rush current can be more than about several times the operating or steady-state current in the full load rating of the motor. In-rush current is present in both and electronic ballasts. The main area of concern is the tripping of circuit breaker and fuses which can affect electrical system components From this, we can see that the electrical power controllers will be rather concerned, since they have to supply the actual current necessary to start the motor. This paper presents a new method to reducing in-rush current and energy saving of the single-phase induction motor used in air-conditioner. It can be obtained that proposed system is low cost and small size as compared with other controller. Experiments are focused on a capacitor starting single-phase induction motor. The optimal power saving and in-rush current limiting by phase angle control are verified by experimental results. Also, auxiliary winding was controlled by electronic starting switch.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.635-640
• /
• 2012

A changed image that they feel through makeup manipulates impression by linking with cultural standards and will be able to direct a variety of makeup images. Makeup in modern society has been expanding into the area of prevention of diseases and health of skin due to the development of cosmetics and has beautifully changed a face into a someone else's face due to the development of makeup technique. Also, assuming that motivation of makeup act of men and women is related to sexual instincts, I tried to analyze what kind of association the gender roles and the function of makeup required by the society has with age and regional and social background. In particular, I tried to explain that makeup act of men not only represents cognitive change of gender roles that have been perceived differently in modern society but has been adopted by men for the pure purpose in a socially equitable competition.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.2
• /
• pp.309-313
• /
• 2001

In this paper, a multifunctional three-phase electronic step-down transformer with output voltage stabilization characteristics is presented for custom power applications. The proposed electronic transformer has some advantages and features as follows: 1) It has 40 % weights lighter than that of commercial magnetic transformer, 2) It has output voltage stabilization characteristic with regulated output voltage over input variations, 3) It cab be operated as circuit breaker in the case of emergency, 4) It can be operated with so called soft starting function. Moreover, the electronic transformer may have stand-by power cutoff function and act as distortion compensator. This paper show the circuit diagram and present its features through various PSPICE simulations.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.325-326
• /
• 2017

태양광 발전의 DC 전압 출력 및 케이블을 이용한 해상풍력 발전과 같은 신재생 에너지 이용이 증대되고 있다. 또한, 에너지의 전력전송 대용량화에 따른 기존의 AC 전력전송 방식을 개선한 DC 전력전송에 대한 연구가 활발히 연구되고 있다. DC 전력전송은 송전선로의 원거리화 및 절연내력의 저감과 같은 장점이 있으나, 전류 차단 시 큰 아크로 인하여 고속차단기 구성이 매우 어렵다는 단점이 있다. 최근에는 DC 전력전송에 있어서 큰 과제인 고속차단을 위해 전자식 차단기에 대한 연구가 이루어지고 있다. 이러한 전자식 차단기를 구성할 경우 차단기 투입 시 큰 돌입전류와 입출력 절연저항이 기존 차단기보다 낮아지는 단점으로 인해 매우 큰 아크가 발생한다. 본 논문에서는 고 전압 대 전류에 적합하고 피크성 전압/전류에 강인한 소자인 SCR을 이용한 전자식 DC 차단기 연구를 진행하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.642-643
• /
• 2007

본 논문은 우리 전력연구원에서 보유하고 있는 실시간 시뮬레이터(RTDS)를 이용하여 산학연을 대상으로 하여 개발된 교육, 훈련 시스템 중 하나의 아이템인 변압기 과도현상 훈련코스데 대해 소개하고자 한다. 실계통 현장에서 자주 발생하는 변압기 내부고장을 RTDS/RSCAD 상에서 구현하여 변압기 과도특성을 파악한 후 계통해석에 이용하고, 변압기 돌입전류 현상과 포화현상 모의를 통하여 변압기 과도현상에 대해 명확히 이해할 수 있도록 하는데 본 훈련코스의 목적이 있다. 우리 전력연구원은 2002년부터 산학연을 대상으로 실시간 시뮬레이터 응용 계통해석 교육을 여러차례 시행해 오고 있으며, 2007년 3월 교육, 훈련 시스템 구축이 완료됨에 따라 앞르로 정기적인 교육을 시행할 예정이다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.3
• /
• pp.55-64
• /
• 2013

In this paper, a new topology which can add a small reactor in series to a condenser-bank type reactive power compensator to limit current is proposed. And also the proposed topology can add or remove a power condenser safely without any addition of inrush-current suppression resistance. The proposed method tests variable resistance of the drain source of a switching device which is controlled by gate voltage in a two-way switch with a diode rectifier and FET switch. In other words, the proposed method is a inrush-current suppression method with the structure of variable resistance. In particular, the proposed method creates smooth current without any resonance in inrush-current as well as is not limited by the time of switch on and off.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.333-333
• /
• 2010

크라이오 펌프는 크기에 비해 상대적으로 큰 배기속도를 가지고 있고 자체 기체 방출이 적어 비교적 쉽고 빠르게 도달압력을 낮출 수 있다. 또 초고진공 펌프로서 경쟁 상대인 터보분자 펌프보다 기체 돌입에 대한 기계적 사고 가능성이 낮다. 그러나 흡착 패널의 온도에 민감하게 반응하는 배기 성능 측면에서 볼 때 크라이오 펌프의 대유량 및 펄스 기체 부하에 대한 성능 유지 및 회복능력은 의문의 여지가 있다. 크라이오 펌프의 기체부하에 대한 공식적인 성능지표로는 최대배기량(max. throughput)과 교차(crossover)값이 있다. 전자는 연속적인 유량[$Pa{\cdot}m^3/s$]에 대해, 또 후자는 일정 기체량[$Pa{\cdot}m^3$]에 대해 흡착 패널이 20 K를 넘지 않는 가동범위를 구하는 것이다. 교차값은 넓은 의미에서 펄스 기체부하에 대한 성능으로 볼 수도 있지만 원래 목적은 진공용기를 저진공 상태에서 고진공 상태로 전환하는 시점을 정하려는 데 있다. 펌프회사에서 제공하는 사양에는 대부분 아르곤 회복시간(Ar recovery time)이라는 지표가 있는데 이는 아르곤을 상당한 유량으로 흘리다 멈췄을 때 얼마나 빨리 기저 상태로 회복되는가를 나타낸다. 보통 사양서에 제시하지는 않지만 주로 크라이오 펌프의 재생상태를 알아보기 위해 사용하는 걸프(gulp) 시험이 있는데 일정량의 기체를 펄스로 도입한 후 압력변화를 기록하여 재생후 배기성능 회복 능력을 보는 것이다. 이들은 겉보기에 서로 다르지만 한편으로는 서로 중복되거나 연관성을 가지고 있어서 실용적인 면에서 절차들을 비교, 검토 및 개선하고 때에 따라서는 적절히 결합할 수 있는 방안을 모색할 필요성이 있다.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.53-57
• /
• 2019

In this paper, we propose a new Z-source inverter structure to reduce switching elements and PWM pulse control method. Z-network is connected between the inverter backplane and ground, rather than between the DC voltage and the inverter in an improved Z-source inverter. And the improved Z-source inverter has the advantages of limiting the capacitor inrush current and reducing the capacitor voltage stress. We have proposed a topology of a new type of switch-reduced improved Z-source inverter that reduces the number of switches from six to four in an improved Z-source inverter and developed a PWM control method suitable for the proposed topology. The characteristics and the performance of the proposed method were verified by using PSIM simulation.