• The Journal of the Petrological Society of Korea
• /
• v.3 no.2
• /
• pp.156-170
• /
• 1994

The talc ore deposits can be divided into chloritic and dolomitic ores according to mineral assemblages. The former is mainly composed of chlorite and talc accompanied with dolomite, muscovite and opaque mineral, and the latter of dolomite and talc with serpentine, calcite and magnesite in places. Talc was originated from chlorite and serpentine. Carbonate minerals were formed either directly from the introduced hydrothermal solution or secondarily as a by-product of steatitization of chlorite and serpentine. The process of talc formation may be governed by the chemical composition of the host rocks and the amount and/or chemical composition of the hydrothermal solution which may be different in places. However, the representative reactions producing talc from chlorite and serpentine are as follows : (1) chlorite+$Mg^{++}+Si^{4+}+H_2O$=talc, (2) chlorite+$Mg^{++}+Si^{4+}+Ca^{++}+CO_2+O_2+H_2O$=talc+ dolomite+ magnesite, and (3) serpentine +$Mg^{++}+Fe^{++}+Si^{4+}+Ca^{++}+CO_2+H_2O$=talc+dolomite. The reactions indicate that the carbonate minerals can be formed when the hydrothermal solution have high $fO_2$ and $fCO_2$. The steatitization might be proceeded by the hydrothermally metasomatic reaction between chlorite schist or chlorite gneiss intercalated in the granitic gneiss and hydrothermal solution accompanied to the wet granitization.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.2
• /
• pp.83-100
• /
• 2022

The Zhenzigou Pb-Zn deposit, which is one of the largest Pb-Zn deposit in the northeast of China, is located at the Qingchengzi mineral field in Jiao Liao Ji belt. The geology of this deposit consists of Archean granulite, Paleoproterozoinc migmatitic granite, Paleo-Mesoproterozoic sodic granite, Paleoproterozoic Liaohe group, Mesozoic diorite and Mesozoic monzoritic granite. The Zhenzigou deposit which is a strata bound SEDEX or SEDEX type deposit occurs as layer ore and vein ore in Langzishan formation and Dashiqiao formation of the Paleoproterozoic Liaohe group. White mica from this deposit are occured only in layer ore and are classified four type (Type I : weak alteration (clastic dolomitic marble), Type II : strong alteration (dolomitic clastic rock), Type III : layer ore (dolomitic clastic rock), Type IV : layer ore (clastic dolomitic marble)). Type I white mica in weak alteration zone is associated with dolomite that is formed by dolomitization of hydrothermal metasomatism. Type II white mica in strong alteration zone is associated with dolomite, ankerite, quartz and alteration of K-feldspar by hydrothermal metasomatism. Type III white mica in layer ore is associated with dolomite, ankerite, calcite, quartz and alteration of K-feldspar by hydrothermal metasomatism. And type IV white mica in layer ore is associated with dolomite, quartz and alteration of K-feldspar by hydrothermal metasomatism. The structural formulars of white micas are determined to be (K_0.92-0.80Na_0.01-0.00Ca_0.02-0.01Ba_0.00Sr_0.01-0.00)_0.95-0.83(Al_1.72-1.57Mg_0.33-0.20Fe_0.01-0.00Mn_0.00Ti_0.02-0.00Cr_0.01-0.00V_0.00Sb_0.02-0.00Ni_0.00Co_0.02-0.00)_1.99-1.90(Si_3.40-3.29Al_0.71-0.60)_4.00O₁₀(OH_2.00-1.83F_0.17-0.00)_2.00, (K_1.03-0.84Na_0.03-0.00Ca_0.08-0.00Ba_0.00Sr_0.01-0.00)_1.08-0.85(Al_1.85-1.65Mg_0.20-0.06Fe_0.10-0.03Mn_0.00Ti_0.05-0.00Cr_0.03-0.00V_0.01-0.00Sb_0.02-0.00Ni_0.00Co_0.03-0.00)_1.99-1.93(Si_3.28-2.99Al_1.01-0.72)_4.00O₁₀(OH_1.96-1.90F_0.10-0.04)_2.00, (K_1.06-0.90Na_0.01-0.00Ca_0.01-0.00Ba_0.00Sr_0.02-0.01)_1.10-0.93(Al_1.93-1.64Mg_0.19-0.00Fe_0.12-0.01Mn_0.00Ti_0.01-0.00Cr_0.01-0.00V_0.00Sb_0.00Ni_0.00Co_0.05-0.01)_2.01-1.94(Si_3.32-2.96Al_1.04-0.68)_4.00O₁₀(OH_2.00-1.91F_0.09-0.00)_2.00 and (K_0.91-0.83Na_0.02-0.01Ca_0.02-0.00Ba_0.01-0.00Sr_0.00)_0.93-0.83(Al_1.84-1.67Mg_0.15-0.08Fe_0.07-0.02Mn_0.00Ti_0.04-0.00Cr_0.06-0.00V_0.02-0.00Sb_0.02-0.01Ni_0.00Co_0.00)_2.00-1.92(Si_3.27-3.16Al_0.84-0.73)_4.00O₁₀(OH_1.97-1.88F_0.12-0.03)_2.00, respectively. It indicated that white mica of from the Zhenzigou deposit has less K, Na and Ca, and more Si than theoretical dioctahedral mica. Compositional variations in white mica from the Zhenzigou deposit are caused by phengitic or Tschermark substitution [(Al³⁺)^VI+(Al³⁺)^IV <-> (Fe²⁺ or Mg²⁺)^VI+(Si⁴⁺)^IV] substitution. It means that the Fe in white mica exists as Fe²⁺ and Fe³⁺, but mainly as Fe²⁺. Therefore, white mica from layer ore of the Zhenzigou deposit was formed in the process of remelting and re-precipitation of pre-existed minerals by hydrothermal metasomatism origined metamorphism (greenschist facies) associated with Paleoproterozoic intrusion. And compositional variations in white mica from the Zhenzigou deposit are caused by phengitic or Tschermark substitution [(Al³⁺)^VI+(Al³⁺)^IV <-> (Fe²⁺ or Mg²⁺)^VI+(Si⁴⁺)^IV] substitution during hydrothermal metasomatism depending on wallrock type, alteration degree and ore/gangue mineral occurrence frequency.

• The Journal of the Petrological Society of Korea
• /
• v.7 no.2
• /
• pp.98-110
• /
• 1998

Hongcheon magnetite deposit is embedded, as a lens shape, in biotite banded gneiss belonging to the Gyeonggi metamorphic complex. It gradationally changes to the host quartz-feldspathic banded gneiss in the mineral composition. Magnetite ore bodies are composed of magnetite ores and magnetite banded gneiss which gradationally change each other in the amount of magnetite. They consist mainly of magnetite, quartz, plagioclase and chlorite accompanied with amphibole, biotite, muscovite, monazite, apatite, ankerite, siderite, rhodochrositic dolomite, calcite and rutile. Amphibole is subdivided into hornblende, richterite and magnesio-riebekite in magnetite ores, and magnesio-, ferro- or actinolitic hornblende in magnetite banded gneiss. The variation in chemical composition may be influenced by bulk composition and controlled mainly by glaucophane $Na(M4)Al_3^{VI}=CaMg$ and richterite Na(M4)Na(A)=Ca substitutions. Biotite in magnetite banded gneiss has an annite composition. Chlorite changes in chemical composition from pycnochlorite to diabantite in magnetite ores and belongs to pycnochlorite in magnetite banded gneiss. The mafic minerals and feldspar have been strongly altered by carbonate minerals which are secondarily formed by introduced hydrothermal solution. Fe-bearing carbonate minerals can be subdivided into ankerite, siderite and rhodochrositic dolomite according to the ratio of Fe-Mg-Mn component.

• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.767-785
• /
• 2021

World-class magnesite deposits are developed in the Dashiqiao mineralized district of the Jiao-Liao-Ji Belt in China. This belt extends to the northern side of the Korean Peninsula and hosts major magnesite deposits in the Dancheon region of North Korea. Magnesite ores from the Pailou deposits in the Dashiqiao district is classified into pure magnetite, chlorite-magnetite, chlorite-talc-magnetite, and dolomite groups depending on the constituent minerals. According to the result of petrographic study, magnesite was formed by the alteration of dolomite, and, talc, chlorite, and apatite were produced as late-stage alteration minerals that replaced the magnesite. Fluid inclusions observed in magnesite are a liquid-type inclusion, with a homogenization temperature of 121-250 ℃ and a salinity of 1.7-22.4 wt% NaCl equiv. The chlorite geothermometer, indicating the temperature of hydrothermal alteration, is 137~293 ℃, slightly higher than the homogenization temperature of fluid inclusions, and the pressure is calculated to be less than 3.2 kb. For magnesite mineralization in the study area, the initially formed-dolomite was subjected to replacement by Mg-rich fluid to form a magnesite ore body, and then it was enriched through regional metamorphism and hydrothermal alteration. It seems that altered minerals such as talc were crystallized by Si and Al-rich late-stage hydrothermal fluids. These results are similar to the genetic environments of the Daeheung deposit, a representative magnesite deposit in North Korea, and it is believed that the two deposits went through a similar geological and ore genetic process of magnesite mineralization.

• Economic and Environmental Geology
• /
• v.28 no.6
• /
• pp.635-646
• /
• 1995

Mineralized zone in the Dongyang talc deposits occurs on the lowest dolomite member of the Hyangsanri Dolomite belonging to the Ogcheon Supergroup. Ore bodies are emplaced as pipe-like body along the axis of minor folds plunging $40^{\circ}$ to the west developed in these dolomite layers. Amphibolite and chlorite schist are found along the upper or lower contact of all ore bodies (Kim et al., 1963; Park and Kim, 1966). Following the recrystallization and silicification of dolomite, tremolite and tabular and leafy talc(I) of the earlier stage formed, and microcrystalline talc(II) formed in the later stage. Talc(l) and tremolite formed by the reaction between dolomite and the fluid. Whereas talc (II) formed by the reaction between dolomite and fluid, or by the reaction between early formed tremolite and fluid. During the early stage of mineralization, the fluid was the $H_2O-CO_2$ system dominant in $CO_2$, In the later stage, the composition of the fluid changed to $H_2O-NaCl-CO_2$system, and finally to the $H_2O-NaCl$ system. The pressure and temperature conditions of the formation of tremolite associated with talc(I) were 1,640~2,530 bar, and $440{\sim}480^{\circ}C$, respectively. The pressure and temperature condition of talc(II) ore formation was 1,400~2,200 bar, and $360{\sim}390^{\circ}C$, respectively. These conditions are much lower than the metamorphic pressure and temperature of the rocks from the Munjuri Formation located about 5 km to the noJ:th of Dongyang talc deposit ${\delta}^{13}C$ and ${\delta}^{18}O$ values of dolomite which is the host rock of the talc ore deposit are 2.9~5.7‰ (PDB), and -7.4~l6.8‰ (PDB), respectively. These values are little higher than those from the Cambro-Ordovician limestones of the Taebaeksan region, but belong to the range of the unaltered sedimentary dolomite. ${\delta}^{18}O$and ${\delta}D$ values of the talc from Dongyang deposit are 8.6~15.8‰ (vs SMOW), and -65~-90‰ (vs SMOW), respectively, belonging to the range of magmatic origin. These values are quite different from those measured in the metamorphic rocks of Munjuri and Kyemyungsan Formation. ${\delta}^{34}S$ value of anhydrite is 22.4‰ (CDT), which is much lower than ${\delta}^{34}S$ (30‰ vs COT) of sulfate of early Paleozoic period, and indicates the possibility of the addition of magmatic sulfur to the system. Talc ores show the textures of weak foliation and well developed crenulation cleavages. Talc ore deposit in the area is concluded as hydrothermal replacement deposit formed before the latest phase of the deformations that Ogcheon Belt has undergone.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.2
• /
• pp.87-99
• /
• 2013

The occurrence, mineralogical characteristics, and origin of the dolomite ores were investigated from major dolomite mines in South Korea. Mineralogical and textural properties of the ores and associated minerals were analyzed using X-ray diffraction, thin section petrography, and scanning electron microscopy. Dolomite ores were light to dark gray in color and mainly composed of dolomite in varying particle size with minor amounts of calcite, quartz and micas. Calcite, quartz, illite, feldspar, kaolin minerals, and chlorite occurred in local veins, dikes and alteration zones. Sepiolite and wollastonite occurred in the altered part of some mine. Asbestos minerals such as chrysotile and tremolite, however, were not identified in the present study. Reddish brown to yellow clay materials were mainly composed of illite, occasionally associated with kaolin minerals and smectite. These clay minerals might be a product of the local hydrothermal alteration related to the dyke intrusion and subsequent weathering. As well indicated in the previous studies, mineral composition, texture, and occurrence of the dolostone beds suggest their formation through the diagenesis of carbonate sediments deposited in the shallow sea during the Precambrian to Paleozoic period.

• Economic and Environmental Geology
• /
• v.32 no.5
• /
• pp.435-444
• /
• 1999

The antimony deposits of the Hyundong mine, located in the northeastern part of the Sobaegsan massif, occur as hydrothermal quartz+carbonate veins and stockworks which fill the fault fractures developed in Precambrian metamOlphic rocks (mainly, granitic gneiss). Hydrothermal alteration occurs commonly in the vicinity of mineralized veins and is characterized by sericitization and silicification. A K-Ar age of alteration sericite is 139.2$\pm$ 4.4 Ma, implying the early Cretaceous age of mineralization, possibly in association with intrusion of nearby acidic dikes (mainly, quartz porphyry). The hydrothermal mineralization occurred in five mineralization stages. These are: (I) stage I, characterized by deposition of chalcedonic quartz; (2) stage II, deposition of quartz with base-metal sulfides and stibnite; (3) stage III, deposition of quartz and carbonates (calcite, dolomite, ankerite, rhodochrosite) with various antimony-bearing minerals such as stibnite, polybasite, berthierite, native antimony, gudmundite and ullmannite; (4) stage IV, deposition of calcite with stibnite; and (5) stage V, deposition of barren calcite. Antimony occurs mostly as stibnite within stages II to IV veins, which has various habits including disseminated, veinlets and euhedral coarse crystals. Fluid inclusion studies indicate that hydrothermal mineralization at Hyundong occurred from the fluids with temperature and salinity of $330^{\circ}$C to 120 and 5.3 wI. % equiv. NaCI. The temperature and salinity of ore fluids systematically decreased with elapsed time in the course of mineralization, possibly due to the influx of larger amounts of meteoric groundwater. The deposition of antimony-bearing minerals occurred at low temperatures «$250^{\circ}$C), mainly due to the cooling and dilution of fluids. Based on the evidence of fluid boiling during the early stage II mineralization, the mineralization occurred under low pressure conditions (about 80 bars, corresponding to depths of about 350 m under hydrostatic pressure regime). Thermodynamic considerations of ore . mineral assemblages indicate that antimony deposition also occurred as the results of decreases in temperature and sulfur fugacity of hydrothermal fluids. Calculated sulfur isotope composition of ore fluids ($\delta^{34}S_{\Sigma s}$=5.4 to 7.8$\textperthousand$) indicates an igneous source of sulfur.