• Journal of the Korean GEO-environmental Society
• /
• v.20 no.4
• /
• pp.11-16
• /
• 2019

The low temperature and temperature difference (variation) may cause to deteriorate the integrity of tunnel constructed in cold region. An insulation material was developed and applied to the tunnel lining surface to keep the temperature of tunnel lining constant in spite of temperature variation at outdoor. The lining surface where the insulation material applied showed the less sensitive to temperature variation than non-applied lining surface.

• Composites Research
• /
• v.13 no.2
• /
• pp.22-29
• /
• 2000

Although C/C composites have excellent mechanical properties at high temperature, the disadvantage of oxidation in air restricts their applications. Thus a lot of investments have been studied to improve this drawback. In this study, SiC used as a thermal protective coating material possesses almost the same expansion coefficient compared to that of carbon, so SiC was coated on 4D C/C composites by Pack-Cementation process. For SiC-coated C/C composites, optical microscopy observations were performed to estimate the conversion mechanism involved and air oxidation tests were also performed to evaluate the improvement of oxidation resistance. Afterwards the optimum conditions of coating process were estimated from the results of several analysis and tests.

• Korean Journal of Materials Research
• /
• v.3 no.4
• /
• pp.372-380
• /
• 1993

In order to improve the oxidative resistance of carbon/carbon composites, aluminium-isopropoxide and aluminium-tri-sec-butoxide sol were coated on the surface of 2D--carbon/carbon composiles and the effects uf coating were investigated. The effects of oxidative resistance were dominant in the case of catalyst/alkoxide mole ratio, 0.07, and $H_2O$/alkoxide mole ratio, 100. Through the dynamic TGA analysis with the heating rate of 20%/min, oxidative initiation tempera~ ture was enhanced about $80^{\circ}C$. The oxidative resistance effects of alkoxide sol were improved according to the times of coating. Also the 20% weight loss time of coated samples by TGA analysis was 20% better than that of un~ coated samples. The thickness of 1^{st} coated layer was about 3${\mu}$m and that of $2^{nd}$ and $3^{nd}$ coated layers was about respectively 4~5${\mu}$m and the weight loss were increased with the increasing of thermal shock test times.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.292-297
• /
• 1995

본 연구에서는 점탄성 제진층이 탄성기판의 한 면에 피복된 2층 제진강파느이 모달 손실계수의 관점으로부터 부분도포에 의한 최적설계의 가능성을 검토하였다. 즉, 일정한 두께로 전면 도포되어 있는 2층의 제진층을 작은 크기의 조각(piece)으로 분할한 경우, 각각의 조각이 손실계수에 미치는 영향을 손실계수의 증감율로써 평가하고, 최소 영향부위의 조각을 최대 영향부위에 이동하여, 동일 질랴의 제진재로 최대의 제진효과를 얻을 수 있는 제진재의 최적 설계법을 제안한다. 수치계산은 주변고정 평판의 (1,1)(1,2)(1,3) 모드 성분에 대해 수행하여 최적설계에 의한 손실계수의 증가와 그때 제진재의 배열형상을 조사하였다. 본 수법에 의해 얻어진 결과는 실험결과와 비교 검토하여 본 최적화 수법의 타당성을 확인하였다. 또한, 제진재의 전면도포의 경우는 Ross-Ungar-Kerwin모델에서도 계산을 수행하여 본 수법의 결과와 비교하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5602-5609
• /
• 2014

This study examined the remineralization effect of CPP-ACFP according to the etching time and the frequency of application. A CPP-ACFP paste was formed from a combination of CPP-ACP paste and fluorine. The remineralization effect of CPP-ACFP was measured according to the etching time and the frequency of applications of CPP-ACFP. The microhardness of 64 teeth was measured as the sound sample and observed by scanning electron microscopy. As a result, the effect on remineralization of the enamel increased with increasing etching time and frequency of application. Therefore, a CPP-ACP paste combination to fluorine in the tooth mineral CPP-ACFP paste fluoride application can be supplied with the material-advisable enamel remineralization.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.3
• /
• pp.228-236
• /
• 2015

In this research, the influence of painting materials and applying timing on carbonation and chloride resistances of high volume SCMs concrete was evaluated. As a durability improving method, comparative tests were conducted with painting materials of ERCO (emulsified refined cooking oil), RCO (refined cooking oil), WR (water repellent agent), and ERCO + WR and with painting timings of right after demolding, and 28 days after the wet curing. From the experiment results, in the case of carbonation and chloride resistance, the carbonation depth and chloride penetration depth were decreased when the painting materials were applied in 28 days of wet curing. Additionally, for painting materials, with the order of ERCO, RCO, ERCO+WR, and WR, the carbonation and chloride penentration was delayed. Hence it is considered that ERCO shows the most favorable performance of resistance against carbonation and chloride penetration.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.684-691
• /
• 2008

Many operations have been carried out using the fluoride ion to prevent and reverse dental caries. It certainly encourages remineralization and also prevents dental caries. However, the remineralization developed by these means is superficial only leaving lower levels of demineralized lesion with a degree of porosity and incomplete mineralization. We must consider its toxic effects when it is ingested for overdose. The CPP-ACP paste is able to remineralize the incipient lesion and has no harmful effects when it is ingested, because it was made form casein which is from the protein of milk. The purpose of this article is to compare the remineralization effects between APF gel and the CPP-ACP paste. we applicated the APF gel and CPP-ACP paste on the artificial enamel carious lesion. After 14 days, we measured the surface microhardness and observed the remineralized lesion under polarized light microscope. The results were as follows : 1. The surface microhardness of group III was the highest, followed by group II, and I(p<0.05). 2. The surface microhardness of group III was significantly higher than those of group I, and II(p<0.05). 3. We could observe thin and irregular remineralization layer of group II, and regular and moderate remineralization layer of group III under polirized light microscope.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.57-64
• /
• 2008

It is well established that fluoride products play an important role in the prevention and remineralization of carious lesion. Fluoride varnish is a concentrated topical fluoride and varnishes adhere to tooth surface, permitting prolonged fluoride exposure and uptake. In this study, the artificial initial enamel caries was caused on the sound human enamel and divided 60 specimens into three groups. Group 1 and group 2 were treated with the topical application of fluoride varnish and stored in artificial saliva for 1 and 2 weeks. Group 3 was stored in artificial saliva for 2 weeks, which acted as control group. Changes in mineral contents were analysed with the confocal laser scanning microscope. The following results were obtained: 1. In group 1 and group 2, the total fluorescence of the lesion(TFL) was reduced in remineralized area compared to in demineralized area(p<0.05). 2. The total fluorescence of the lesion of remineralized area was more reduced in group 2 than in group 1(p<0.05). 3. The total fluorescence of the lesion was more reduced in group 2 than in control group(p<0.05). 4. Confocal laser scanning microscope can be used in quantitative analysis of remineralization by fluoride varnish.

• Journal of the Korea Convergence Society
• /
• v.8 no.6
• /
• pp.139-145
• /
• 2017

The aim of this study was to measure the remineralization effect of APF gel and fluride varnish on artificial enamel caries using CLSM in vitro. The samples were divided into 3 groups: control, 1.23% APF gel, 5% NaF varnish. The specimen surfaces were observed by CLSM and measured average fluorescence of the lesion(AFL). The results were analyzed using one-way ANOVA and Pearson's correlation analysis at a significance level off 0.05(PSWA 18.0, SPSS Inc., USA). There were significant differences between AFL at baseline and 1 day after fluoride application(p<0.05) but there are no significant differences between ${\Delta}$ AFL of all groups (p=0.222). Result of Pearson's correlation analysis, there are no significant correlation between VHN and AFL, but there were significant correlation between AFL at baseline and 1 day after fluoride application(r=0.811, p<0.001). Although AFL decreased after fluoride application, but there was no difference between the groups. In the future, it is necessary to test the oral environment model or in situ experiment supplemented the limitations of this study.

• Journal of the Korea Convergence Society
• /
• v.8 no.1
• /
• pp.89-96
• /
• 2017

This study is to analyze seven fluoride varnishes remineralizing effects on early carious lesions in the clinical field. While CS, MI, CW, VV, EP, FP and FN were used for permanent teeth, CS, MI, CW and FP were used for primary teeth. The specimens were demineralized for 4 days after forming a $3{\times}3mm^2$ window with nail varnish, applied with varnishes separately, then were stirred in artificial saliva for 1 week. QLF-D analysis of carious lesion size showed that permanent teeth's ${\Delta}F$ value decreased after applying CS(4,64), MI(4.86), CW(4.50), and EP(5.50), while for primary teeth, FP(3.00) and MI(3.00) displayed a remineralizing effect. Thus, MI can be used effectively for preventing caries for both adults and children in the clinical field.