• Clean Technology
• /
• v.8 no.2
• /
• pp.101-110
• /
• 2002

Concurrent development system which includes design, analysis, basic experiment and performance test procedure for rotary atomizing painting equipment was established. Basic design specifications of the equipment parts were determined according to the overall design requirements of painting equipment using conceptual design model. On the basis of derived design specifications, design and analysis procedures was proposed for developing each equipment part. Also proposed are experiment and test methods to investigate the spray and transfer characteristics of designed painting equipment, and their measurement variable, process and evaluation criteria are constructed. The present development system was validated by applying its entire processes to the actual painting equipment.

• Journal of the Speleological Society of Korea
• /
• no.92
• /
• pp.31-40
• /
• 2009

The purpose of this study was to revitalize management of Hapki-do gymnasium based on customer. The Subjects of this study were 264 persons who have trained Hapki-do. Also, subjects were chosen by convenience sampling method. Data were analized with SPSS 12.0 version for frequency and crosstab analysis. Following is the analysis result. First of all, it is necessary repairing facilities and operating systematic education program. Secondly, it is necessary a discriminatory education program. Further study on demand features of Hapkido gymnasiums will contribute to expand and to strengthen the base of Hapkido development. This will aid Hapkido to gain dominant position in the competition of martial arts and sports industry.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5A
• /
• pp.691-697
• /
• 2008

Coating the high tension bolted frictional joint has been generally allowed for anti-corrosion purpose. However in case of painting on paying surface of the high tension bolt, the influence on a slip strength of the joint depending on precision of painting has remained controversial. The study thus was intended to identify the slip behavior on high tension bolted frictional joint when applying ceramic painting, which has been currently developed. A slip test was conducted on a high tension bolted frictional joint specimen on which ceramic painting has been applied and a slip load and slip coefficient were measured. Based on result, the safety and usability of ceramic painting-applied high tension bolted frictional joint was evaluated. As a result, a difference to some extent by specimen in terms of load-displacement when a slip occurred was observed but an average slip coefficient appeared to have exceeded 0.4, which is the design frictional coefficient set forth in the specification. To secure the safety and usability of ceramic painting-applied high tension bolted frictional joint, it's necessary to establish the standard for painting as well as to revise the relevant specification.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.7
• /
• pp.36-43
• /
• 1998

Surface roughness of cold rolled steel sheet as well as the coating technique itself is quite important in obtaining high image clarity of electronic products and car outer panels. Especially, surface characteristics of steel sheet have acquired increasing attention from the steel and automotive industries. While the influence of such characteristics on paintability formability and painted surface appearance is important in defining steel surface requirements for automotive industries. Therefore this paper is dedicated primarily to the issue of paint appearance and reviews for improvement of roughness and peak count about the surface of work roll for the actual temper mill. The conclusions were obtained as follows ; 1) Roughness and peak count about the surface of steel sheet is strongly affected by surface condition of work roll. 2) The electro-discharge textured roll has more uniform roughness distribution than shot blasted roll and it's painted appearance of steel sheet has more improvement than that of the shot blasted because it has more harmonic wave roughness, and the higher peak count of surface roughness.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.4
• /
• pp.331-339
• /
• 2017

The purpose of this study is to evaluate the effect of curing age and thickness of coating material on the bond strength of polymer cement slurry(PCS)-coated rebar that can replace epoxy-coated rebar. The test specimens were prepared with two types of cement, two types of polymer dispersion as St/BA and EVA, two polymer-cement ratios, two coating thicknesses and three curing ages, and tested for bond strength test to cement concrete. The flexural behavior of RC beam that is made by optimum conditions such as polymer-cement ratio of 80%, coating thickness of $100{\mu}m$ and curing age of 7 days of PCS recommended from the bond strength test is also conducted. From the test results, The maximum bond strength of PCS-coated rebar at curing age of 7-day and coating thickness of $100{\mu}m$ was about 1.52 and 1.58 times respectively, the strength of plain and epoxy-coated rebar. The ultimate loads of RC beam using PCS-coated rebar were range of 81.1% to 102.3% of that of plain rebar, and 98.4% to 124.1% of that of epoxy-coated rebar. It is apparent that PCS-coated rebar with EVA, curing age at 7-day and $100{\mu}m$ can replace epoxy-coated rebar in construction field.

• IE interfaces
• /
• v.9 no.2
• /
• pp.61-74
• /
• 1996

자동차 조립공장의 주요 공정은 차체라인, 도장라인, 조립라인의 순으로 구성되어 있다. 작업의 효율성을 높이기 위하여 차체라인과 조립라인은 주요 부품소모의 평준화를, 도장라인은 동일 색상차체의 연속 생산을 선호하므로, 생산순서의 결정시 상호 상층되는 점이 많다. 본 연구에서는 조립공장전체의 생산성을 극대화하기 위하여 차체라인, 도장라인, 조립라인의 특성을 고려한 일일생산순서결정 방법을 제시한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.31-32
• /
• 2007

자동차 도장 전처리 공정 중 인산염처리는 소지와 도장층 사이의 밀착성을 향상시키고, 강판의 내식성을 향상시키는 목적으로 행하여진다. 인산염 조직이 치밀하게 형성되지 못하면 도장층 박리 등의 불량이 발생할 수 있다. 본 연구에서는 전기로재 BAF(Batch Annealing Furnace) 냉연강판의 인산염처리 특성에 대한 분석 및 개선안 도출 과정을 서술하였다.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.231-239
• /
• 2021

The purpose of this study is to verify the effectiveness of service quality on satisfaction factors, and to provide practical information on the management of Taekwondo Dojang nationwide, which are facing difficulties due to the decrease in trainees and COVID-19. In this study, 11 studies were selected from January 2010 to December 2020. The conclusion is as follows. First of all, it has been confirmed that the overall influence of Taekwondo dojo service on satisfaction is moderate. Second, the effectiveness of low-quality service on satisfaction (painting, customers, trainees) was the highest, and there was no significant difference between the factors in order of confidence, response, empathy and reliability. Third, the quality, effectiveness and satisfaction of the satisfaction type were the greatest, and the satisfaction of the trainees was the coating and customer satisfaction.

• 건축구조
• /
• v.14 no.2
• /
• pp.30-34
• /
• 2007

PEB SYSTEM의 특징인 앤드플레이트 접합부 도장 안전성과 일면용접의 안전성 등은 국내 건설업계에 종사하는 기술자, 설계자, 감리자 등의 인식부족과 PEB업체의 기술홍보 부족으로 널리 알려지지 못한 까닭에 금번에 이 사항들을 논하고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.1
• /
• pp.77-85
• /
• 2020

Currently, life-cycle cost analysis methods are introduced to maintain large infrastructure facilities in Korea. However, there are not many cases in which maintenance models are applied that reflect conditions such as the location of a facility and its surroundings. In order to establish an appropriate maintenance strategy, a cost prediction, deterioration model, and a decision model reflecting uncertainty should be established. In this study, an economic analysis model was developed for long-term cost planning and management based on user decisions based on maintenance methods and judgment criteria for painting specifications applied to power generation structures. The performance of the paintwork was assessed through the paint deterioration test for the application of the economic analysis model, and the results of the economic analysis according to the applied paint specifications (Urethan, polysiloxane, fluorine) were verified by applying the proposed economic analysis model. In this study, it is believed that the selection of the repair cycle and evaluation methods applied with the development model rather than the performance of the painting can be expected to be used as basic data for the maintenance cycle, even if it is not limited to the painting.