• 제목/요약/키워드: 도어 댐퍼

검색결과 5건 처리시간 0.029초

민항기 door damper용 칼날형 댐핑 오리피스의 설계 (Design of Sharp-edged Type Damping Orifices for an Aircraft Door Damper)

  • 홍예선;권용철;김종혁;박설혜;박호열;김상범
    • 한국항공우주학회지
    • /
    • 제40권12호
    • /
    • pp.1080-1085
    • /
    • 2012
  • 본 논문에서는 작동유의 최대 동점성 계수가 400cSt까지 변하는 조건에서 항공기 도어 댐퍼용 칼날형 댐핑 오리피스를 설계하였다. 전산 유동 해석과 실험을 통하여 칼날 오리피스의 유량계수를 분석하였고, 오리피스의 크기와 칼날 각도, 유동방향, 레이놀즈수가 미치는 영향을 고려하였다. 이 결과를 바탕으로 오리피스의 크기에 따라 댐퍼의 성능 기준을 충족시키기 위해 제한해야 하는 댐퍼의 쿨롱 마찰력 범위를 유도하였다.

걸윙도어 쇽업쇼버의 최적설계 (Optimum Design for Shock Absorber of Gullwing Door)

  • 장영진;이상범;임홍재
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 추계학술대회논문집
    • /
    • pp.188-191
    • /
    • 2005
  • In this paper, a design optimization technique is presented for determining the stiffness and the damping coefficient of the shock absorber that is used in the Gullwing door system of passenger car. The contact force between the shock absorber and stopper link, when the door is opened, is set up as objective function, and the stiffness and the damping coefficient are set up as design variables. ADAMS optimization module (SQP method) is applied in the design optimization process. This study shows that the stiffness and the damping coefficient of the shock absorber can be effectively determined in initial design stage of the Gullwing door.

  • PDF

제연구역 출입문의 최적 설계를 위한 도어클로저의 기준 산정에 관한 연구 (Study on the Assessment of the Criteria on a Door Closer for the Optimum Design of the Access Door of a Smoke Control Zone)

  • 이재오;최충석
    • 한국화재소방학회논문지
    • /
    • 제27권3호
    • /
    • pp.66-71
    • /
    • 2013
  • 본 연구의 목적은 제연구역 출입문의 최적 설계를 위한 플로어힌지(floor-hinge) 및 도어클로저(door closer)의 기준을 제시하는데 있다. 차압에 대한 개방력은 60 Pa일 때 60.75 N, 40 Pa일 때 40.5 N, 32.5 Pa일 때 32.91 N, 12.5 Pa일 때 12.66 N 등이다. KS F 2806의 기준을 적용한 플로어힌지 및 도어클로저의 개방력은 No.1은 27.5 N, No. 2는 40 N, No. 3는 75 N, No. 4는 100 N, No. 5는 125 N 등이다. 차압과 플로어힌지 및 도어클로저의 개방력을 NFSC 501A의 개방력 제한값과 비교한 결과 기준을 초과하는 것으로 확인되었다. 따라서 NFSC 501A 차압과 방연 풍속을 설계에 반영하는 것뿐만 아니라 개방력도 설계에 반영할 필요가 있다. 제연댐퍼의 종류에 따라 출입문의 플로어힌지 및 도어클로저의 설치 조건은 호칭에 따라 다르다. 저차압용의 경우는 No. 1, No. 2, No. 3의 설치가 가능하며, 일반 차압용의 경우에는 No. 1, No. 2의 설치가 가능하였다.

부속실 급기가압 시 압력특성 변화에 관한 연구 (A Study on the Pressure Change during the Pressurization to the Elevator Lobby)

  • 김범규;박용환;김홍식
    • 한국화재소방학회논문지
    • /
    • 제26권5호
    • /
    • pp.99-104
    • /
    • 2012
  • 본 연구에서는 공동주택 화재 시 피난시나리오 및 화재실 배연개구부 유무에 따른 부속실 급기가압 시스템의 성능 및 효용성을 평가하기 위해 각 실의 압력변화 특성을 실험적으로 측정하였다. 그 결과, 화재실문과 계단실문 개폐 시나리오 및 배연개구부의 유무에 따라 압력변화 특성이 크게 달라졌으며 최저설계차압으로 재안정화 되기 전에 부속실 과압 또는 부압 발생, 도어클로져 닫힘 기능 저하 등의 현상이 나타났다. 또한. 급기댐퍼의 설치위치보다는 화재실 배연개구부의 존재가 규정방연풍속 유지에 필수적인 것으로 나타났다.

항공기의 도어 댐퍼용 교축 오리피스의 설계 (Design of Throttle Orifices for an Aircraft Door Damper)

  • 권용철;김종혁;홍예선;김상범
    • 드라이브 ㆍ 컨트롤
    • /
    • 제9권3호
    • /
    • pp.23-28
    • /
    • 2012
  • In this study the flow rate-to-pressure difference characteristics of short-tube type damping orifices for an aircraft door damper were investigated by CFD analyses and experiments. As the design parameters of the damping orifice its diameter, inlet and outlet angle, tube length and the viscosity of the working fluid were taken into consideration. The results showed that the discharge coefficient of the orifices are dependant on the inlet and outlet angle and the oil viscosity, while their length plays an little significant role. Although the short-tube type damping orifice was employed to induce a turbulent flow, their discharge coefficient decreases rapidly as the oil viscosity gets higher than 50mm2/s. Therefore, in order to determine the orifice size, satisfying the working temperature range of the door damper, the oil viscosity as well as the friction force on the damper piston should be kept within proper values. For the verification of the CFD analysis results the actual performance of a door damper was measured and compared with them.