• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.594-600
• /
• 2011

"The guidelines on the management of indoor air quality of public transportation" was enacted in December 2006 due to the fact that the interest and demand of improving the air quality for citizen using public transportation have been increased. Thus this research has considered what has influenced on the passenger cabin HVAC as well as the improvement of customer service as we proceed the study for better indoor air quality inside of the train by developing the module of cleaning air system for pollutants of a car air.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2998-3006
• /
• 2011

This paper is about the relations between the electric multiple unit and ESS(Energy Storage system, here after) applying bi-direction Buck-Boost Converter. ESS may be possible to suppress the line voltage drops and the power loading fluctuations and to save the regeneration power lapses. This paper confirm for simulation that ESS reusing regenerative power generated during braking in train. Also, presents the influence of regenerative power variation of train and catenary acceptability for energy saving obtained by applying the ESS to Daejeon Metro line 1.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1049-1058
• /
• 2011

This paper suggests blending time adjusting method of braking command characteristics management and Set value test for optimizing of braking deceleration to enhance the precise position stopping. This method minimizes pneumatic-braking degree deviation by characteristics management, and secures braking stability at braking. By Set value test method, braking blending characteristics are analyzed accurately. And by optimal timing tuning at braking blending, It enhanced the precise position stopping with stabilization of deceleration To demonstrate the usefulness of these suggestion, I modeled for Deajeon Line #1. And through comparison with case of related companies, the proposed method which this paper suggested is proved to be superior to others.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.621-629
• /
• 2011

Uniaxial and biaxial torsional fatigue tests were conducted on the samples extracted from urban railway wheel steel. Ultimate and yield strengths of the steel were 1027.7 MPa and 626 MPa, respectively. The uniaxial fatigue limit was 422.5 MPa, corresponding 67% of the ultimate tensile strength. The ratio of ${\tau}_e/{\sigma}_e$ was 0.63. Fatigue strength coefficient and exponent were 1319.5 MPa and 0.339, respectively. Maximum principal and equivalent strain were found to be adequate parameter to predict fatigue lifetime of the steel under multiaixal fatigue condition.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.142-149
• /
• 2011

The basic of installing smart air cleaner in railway system is improvement of continuous real time sensing technologies. And building smart air cleaner in railway system with IT is needed. When smart air cleaner in railway system is developed, the installation of sensor which is for measuring air quality in the passenger room and setting revolution cycle of filter which is for removing fine dust is very important. In order to install it in a train which is now running, after making of standard test certification and verification of product's stability with enough self-test, application test will be performed.

• Journal of the Korean Society for Railway
• /
• v.9 no.5 s.36
• /
• pp.577-581
• /
• 2006

Urban transit operation corporations perform repetitive work to investigate the EMU, electric multiple unit, by some fixed maintenance cycle. The quality of maintenance work usually depends on workers' know-how. Though some information to support the maintenance work is digitalized and provided to workers, it is not great help to them because of its non systematic structure. The information includes drawings, manuals, work results, work history, fault history, etc. The maintenance workers want to access the information anytime anywhere, and make an effect to promote the efficiency of maintenance for EMU. But it is difficult to achieve that without some structured information system which is able to use in work area. So we develop maintenance information system for EMU for about 4 years from 2002 to 2005. In this paper we present the configuration and characteristics of this system, and the results of the evaluation test. We install the system in two depots, Changdong and Jichuk, belonged to SeoulMetro to evaluate its efficiency and estimate its economic benefits.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.104-109
• /
• 2010

Management innovation as a strategic alternative to create competitive advantages in the global market, is being actively progressed by conglomerates such as Samsung, LG and Toyoda as they cut a brilliant figure in the 21 century by using various innovation methods. However, the domestic railway sectors, in particular urban railway depots have neglected management innovation as they undertake Operation and Management in non-competitive settings of a corporate enterprise. This paper analyzes the critical success factors that have switched the most obsolete depots to a benchmark model for domestic railway depots based on the remodeling businesses undertaken in Gunja rolling stock maintenance office, Korea's first urban railway depot, along with 5S 6sigma program.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.71-77
• /
• 2007

The surface of railway wheel tread in wheel-rail system can not be free from wear because of various circumstance such as railway condition, maintenance condition, weather condition, characteristics of wheel surface's geometrical shape, and vehicle suspension's structural characteristics etc. Therefore, the research on wear reduction and maintenance method are very important to ensure the safety of railway vehicle, to improve car comfort and to decrease maintenance cost. In this study, the wear rates of railway wheel have been periodically measured in terms of the running distance of Electrical Multiple Unit which have been currently operated and the microstructure transformation of wheel tread using replication method have been performed. The results show that the relations between the flange wear and tread microstructure are depended on running distance and it will supply basic data on wheel maintenance.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.643-652
• /
• 2009

This paper presents brief history and a state-of-the-art survey of Life Cycle Cost (LCC) analysis, in particular LCC analysis in the Urban Transit Vehicle, based on a internationl codes and standards related to LCC analysis. A main objective of the LCC analysis is to quantify the total cost of ownership of a product throughout its full life cycle, which includes research and development, construction, operation and maintenance, and disposal. The predicted LCC is useful information for decision making in purchasing a product, in optimizing design, in scheduling maintenance, or in planning overhaul. This paper presents a LCC procedure consisting of seven steps, which are "Problems definition", "Cost elements definition", "System modeling", "Data collection", "Cost profile development", "Evaluation", and "Verification". Sub-activities to be encompassed in the seven steps procedure are described.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1946-1954
• /
• 2008

In urban railways operated by 10 cars or 8 cars per trainset, passengers split up and board a train. On-board passengers for each car are not aware of congestion level of other cars of the train. Passengers waiting at stations can not predict congestion rate of the car which they get on. Therefore, the number of passengers is not equally distributed. The cars with a relatively low congestion level and the ones with a high level coexist in the train. The objective of this paper is to enhance passenger convenience and improve train operational efficiency through operational headway adjustments according to congestion level of each car. It also aims to spread passengers out evenly and assess the degree of congestion on each car by measuring the weight of each car including passengers during peak and off-peak hours.