• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.47.1-47.1
• /
• 2010

Mg합금은 모든 구조용 재료 중에서 비강도가 크며 가공성이 가장 우수하여 재료의 실제 적용시에 2차 가공비 측면에서 다른 경량재료에 비해 유리하다. 그래서 경량화를 필요로 하는 최근 산업체의 요구를 충족시킬 수 있는 재료이다. 그러나 마그네슘 합금의 적용이 매우 제한되는 이유는 결정구조가 hcp로서 냉간가공이 어렵고, 강화기구가 석출경화 및 고용강화로 제한되기 때문에 기계적 성질, 즉 강도와 연성이 모두 낮다. 특히 고온에서 기계적 성질이 급격히 저하되기 때문에 구조용 재료로써는 사용이 어렵다. 따라서, 본 연구에서는 고온에서 안정한 MgZn상과 항복강도를 향상시키는 Mg4Ag상의 석출을 보이는 Mg-Zn-Mn-Ag합금의 시효거동 및 미세조직 변화에 대해 검토하고자 하였다. 본 합금의 석출거동, 미세조직 및 경도 변화에 미치는 시효처리의 영향에 관한 연구를 수행하기 위해 Pandat Program을 이용해 열역학적 계산을 통한 상태도 해석 및 석출상을 예측 하였다. 계산된 결과는 DSC실험을 통해 비교 분석함으로써 신뢰성을 확보하였고 미세조직 및 석출상 분석을 위해 OM, SEM 그리고 XRD로 관찰하였다. 또한, 시효처리에 따른 기계적 특성을 분석하기 위해 상온 및 고온 인장시험을 하였고, 인장시험 후 파단면 분석을 통하여 재료의 파괴거동을 분석하였다.

• Composites Research
• /
• v.13 no.4
• /
• pp.1-10
• /
• 2000

SiC particulate reinforced metal matrix composites(MMCs) are emerging as candidate materials for the automobile and aerospace industries due to their significant increase in elastic modulus and strength compared to conventional metallic materials. However, in order to make successful application of MMCs, it is very important to understand micro-failure mechanism under cyclic loading because failure mechanism of MMC is dominated by accumulation of micro-failure due to applied loading. In this study, ultrasonic Lamb wave and acoustic emission(AE) have been used to monitor microscopic damage accumulation under cyclic loading for SiC particulate reinforced metal matrix composite(SiCp/A356). It was found that the change in velocity and attenuation of ultrasonic Lamb wave due to the increase of loading cycles could be characterized by three different stages corresponding to the microscopic fracture processes. The characteristic of AE signal at each stage was analyzed and discussed by comparing with the change of ultrasonic characteristic in MMCs.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.223-237
• /
• 1996

플라스틱재료의 강도, 인성, 경직성, 탄성 등과 같은 기계적 특성을 개선시켜 주기 위해 kaoline, talc, sand, quartz 등과 같은 규산염을 첨가하여 복합재료를 만들고자 하는 연구가 상당히 활발하다. 이와 같이 다양한 규산염이 복합재료의 강화재 또는 첨가제로 사용되는 반면에, 규산염가운데 공업적으로 이용도가 가장 높은 montmorillonite는 아직도 복합재료의 강화재로 폭 넓게 이용되고 있지 못한 실정이다. 이론적으로 볼 때, 높은 분자량을 지니는 무기고분자 (예; inorganic montmorillonite)와 유기고분자 (organic polymer)를 gkadbk는 실질적인 무기-유기 결합물질의 생성이 가능할 수 있으며, 이에 대한 연구 또한 시도되고 있다. 이렇게 해서 얻게 되는 무기-유기 복합체, 즉 montmorillonite로 강화된 플라스틱 복합재료 bumper를 사용함으로써 접촉 또는 충돌시 충격완화의 효과를 가져 올 수 있어 안정성이 좋아지고, 내파괴성이 높기 때문에 비강화 플라스틱재료보다 더 오래 사용할 수 있으므로 경제성이 좋을 뿐만 아니라, 폐품의 감소로 인해 환경보호에도 일익을 담당할 수 있다. 따라서, 본 연구에서는 이러한 montmorillonite강화 플라스틱 복합체를 얻기 위해 우선 무기-유기 고분자물질의 형성이 가능한가를 조사분석하였다. 이를 위해 먼저 amontmorillonite의 층사이에서 화학반응이 수행될 수 있는 충분한 공간을 얻고자 Na-Montmorillonite 층사이의 Na+-이온을 긴 알킬사슬을 취하는 유기 양이온으로 치환시켜 주었다; 이렇게 해서 얻은 유기양이온-몬트모릴로나이트 층간화합물 (Organic cation-Montmorillonite Intercalations-complex)내에 유기 단분자 (organic monomer)를 추가적으로 삽입시킨 후, montmorilonite의 층내에서 증합반응시켜 고분자화해 줌으로써 무기고분자와 유기고분자가 서로 결합된 무기-유기고분자 결합물질을 형성하고자 하였다. X-선 및 IR-분석결과 층내에서의 유기단분자의 고분자화 반응이 성공적으로 이루어 졌음이 입증되었다.

• Composites Research
• /
• v.20 no.4
• /
• pp.25-30
• /
• 2007

The advanced fiber-reinforced laminated composites are widely used in a variety of engineering applications such as aerospace, marine, mechanical and civil engineering for weight savings because of their high specific strength and stiffness. The material properties of ply is known to have larger variations than that of conventional materials and very sensitive to the loading direction. Therefore, it is important to consider the variations on designing the laminated composite. This paper demonstrates the importance of considering uncertainties through examining the effect of material properties variations on various design requirements such as tip deflection, natural frequency and buckling stress using COMSOL-MATLAB interface.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.405-405
• /
• 2022

본 연구는 주암조절지댐 유역의 강우 빛 비강우시츨 포함한 장기간의 유역유출 및 지하수 이동에 따른 유량분석과 오염물질 부하 유입특성을 분석함으로써 유역의 오염물질을 선제적으로 관리하고 조절지댐내의 수질을 효과적으로 관리하기 위해서 수행되었다. Hydrological Simulation Program - Fortran (HSPF) 모델을 적용하기 위하여 주암조절지댐 유역의 복잡한 지형과 기상조건 및 오염원 자료를 반영하고 수질관리 대책을 수립하는 데 적용하고자 하였다. 주암조절지댐 유역은 환경부의 소유역 구분을 고려하여 28개의 유역으로 세분화하고 티센망도를 고려해 3개의 그룹으로 재차 분류하였다. 기상 자료는 연구대상지역의 직접측정자료의 한계로 여수와 광양 기상청의 자료를 사용하였으며, 강우 자료 또한 소유역 그룹에 맞춰 입력 자료로 사용하였다. HSPF 모델의 보정은 유량 및 수질 (총질소 및 총인)에 대하여 2017 ~ 2021년의 모니터링 실측자료를 대상으로 수행되었다. 보정 결과는 R², RMSE로 평가하였고, 보정된 HSPF 모델을 바탕으로 유역별 유량 및 수질에 영향을 미치는 주요 인자를 분석하였다. 본 연구의 결과는 주암조절지댐의 수질을 예측할 수 있는 3차원 수리-수질 모델의 입력자료로 활용될 예정이며, 추후 기후변화 영향을 고려한 상류 유역의 수질관리 계획 수립에 기여할 것으로 기대된다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.8
• /
• pp.881-887
• /
• 2012

CFRP composite materials have been widely used in various fields of engineering because of their excellent properties. They show high specific stiffness and specific strength compared with metallic materiasl. Woven CFRP composite materials are fabricated from carbon fibers with two orientation angles ($0^{\circ}/90^{\circ}$), which influences the mechanical properties. Therefore, woven CFRP composite materials show different types of fracture behavior according to the load direction. Therefore, the fracture behavior of these materials needs to be evaluated according to the load direction when designing structures using these materials. In this study, we evaluate the fracture strength of plain-woven CFRP composite materials according to the load direction. We performed tests for six different angles (load direction: $0^{\circ}/90^{\circ}$, $30^{\circ}/-60^{\circ}$, $+45^{\circ}/-45^{\circ}$) and estimated the fracture strength for an arbitrary fiber angle by using the modified Tan's theory and harmonic function.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.6
• /
• pp.545-550
• /
• 2013

In pattern recognition field, data classification is an essential process for extracting meaningful information from data. Adaptive boosting algorithm, known as AdaBoost algorithm, is a kind of improved boosting algorithm for applying to real data analysis. It consists of weak classifiers, such as random guessing or random forest, which performance is slightly more than 50% and weights for combining the classifiers. And a strong classifier is created with the weak classifiers and the weights. In this paper, a research is performed using AdaBoost algorithm for detecting chaff echo which has similar characteristics to precipitation echo and interrupts weather forecasting. The entire process for implementing chaff echo classifier starts spatial and temporal clustering based on similarity with weather radar data. With them, learning data set is prepared that separated chaff echo and non-chaff echo, and the AdaBoost classifier is generated as a result. For verifying the classifier, actual chaff echo appearance case is applied, and it is confirmed that the classifier can distinguish chaff echo efficiently.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1981.05a
• /
• pp.14.3-15
• /
• 1981

Midline Granulcma(Malignant midline reticulosis) of upper respiratory tract was known as one of the fatal diseases that involve the nasal cavity, paranasal sinuses, pharynx and larynx, with progressive localized necrotizing inflammation and granuloma formation. The disease was first described in 1897 by McBride and after Stewart many clinical and histological studies have been done in 1933. But its etiology is still unclear and therapeutic methods are still under development. The authors carried out a clinical study of 15 cases which were diagnosed and treated as midline granuloma, including 7 cases which received combination radiation and steroid therapy from January 1964 to December 1980. The results are as follows: 1) Age and Sex distribution: 6 cases fell into the ages from 30 to 39 years: 13 cases (87%) were male and 2 cases (13%) were female. 2) Primary lesion sites were nasal cavity and paranasal sinuses area (8 cases: 53%), palatine tonsil (3 cases: 20%) and pharynx (2 cases: 13%) in order. 3) Common symptoms were nasal stuffiness and sore throat (6 cases: 40%), headache (5 cases: 33%), nasal discharge and facial edema (3 cases: 20%) in order. 4) Microorganisms were identified in 4 cases: staphylococcus in 2 cases, pseudomonas in 1 case and streptococcus in 1 case. 5) All 7 cases who received combination radiation and steroid therapy revealed complete regression and no recurrence. 6) Among the 5 cases, who received steroid and antibiotic therapy, 2 cases died and other 3 cases improved temporarily and then developed aggrevation of symptoms.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.2
• /
• pp.155-164
• /
• 2014

Carbon-fiber-reinforced plastic (CFRP) composites are increasingly being used in a variety of industry applications, such as aircraft, automobiles, and ships because of their high specific stiffness and high specific strength. Aircraft are exposed to high temperatures and high humidity for a long duration during flights. CFRP materials of the aircraft can absorb water, which could decrease the adhesion strength of these materials and cause their volumes to change with variation in internal stress. Therefore, it is necessary to estimate the characteristics of CFRP composites under actual conditions from the viewpoint of aircraft safety. In this study air-coupled ultrasonic testing (ACUT) was applied to the evaluation of water absorption properties of CFRP composites. CFRP specimens were fabricated and immersed in distilled water at $75^{\circ}C$ for 30, 60, and 120 days, after which their ultrasonic images were obtained by ACUT. The water absorption properties were determined by quantitatively analyzing the changes in ultrasonic signals. Further, shear strength was applied to the specimens to verify the changes in their mechanical properties for water absorption.

• Composites Research
• /
• v.34 no.2
• /
• pp.77-81
• /
• 2021

Due to the high specific strength and stiffness of the composite materials, the composite materials have been extensively used in various industries. In particular, carbon fiber reinforced composites are widely used in many mechanical structures. In addition, since carbon fiber reinforced composites have anisotropic properties, to understand the fatigue behavior of composites with different fiber orientation is very important for the efficient structural design. Therefore, in this paper, the effect fiber orientation on the fatigue life of composite materials was experimentally evaluated. For this purpose, tensile and fatigue tests were performed on the off-axis specimens (0°, 10°, 30°, 45°, 60°, 90°) of the composite materials. As a result of the fatigue tests, the fatigue strength of the composites decreased significantly as the fatigue strength slightly deviated from 0 degrees. On the other hand, the more deviated, the less decreased. This is because the role of supporting the load of fibers decreased as the stacking angle increased. In addition, the fatigue behavior was analyzed by introducing a fatigue strength ratio (Ψ) that eliminates the fiber orientation dependence of the off-axis fatigue behaviors on the unidirectional composites. The off-axis fatigue S-N lines can be reduced to a single line regardless of the fiber orientation by using the fatigue strength ratio (Ψ). Using the fatigue Ψ-N line, it is possible to extract back to any off-axis fatigue S-N lines of the composites with different fiber orientations.