• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 1992년도 추계학술대회 논문집
• /
• pp.63-67
• /
• 1992

본 논문은 프레스나 해머로 생산되는 리브/웨브 형태를 갖는 축대칭 부품에 대한 블로커설계 자동화시스템의 개발에 관하여 설명한 다. 플레시를 갖는 밀폐형단조 공정에서 블로커 형상의 설계는 매우 중요하다. 일반적으로 단조공정에서 부품의 형상은 대부분 3차 원 형상이다. 그러나 복잡한 3차원 형상의 부품을 그대로 고려하여 설계한다는 것은 어려움이 많고 실용적이지도 못하다. 따라서 블로커를 설계할 때 부품을 단면으로 도려함으로서 설계작업을 단순화시킬 수 있다. 본 논문에서는 축대칭 형태의 부품만을 고려하였다. 한 부품단면은 리브나 웨브와 같은 부분단면들로 분할할 수 있으며, 이 부분단면들에 대하여 설계규칙과 데이타베이스를 적용함으로서 블로커형상을 설계할 수 있다. 부품단면의 형상을 분할하여 시스템 내에 인식시키기 위하여 단면을 도면요소표현, 좌표 및 반경표현 그리고 속성표현으로 나타냈으며 여기에 단면의 도면요소표현은 부품의 체적, 단면적, 원주길이 및 반단면의 질량중심을 계산하는데 쉽게 이용될 수 있다. 그리고 좌표 및 반경표현은 경사각, 코너반경과 필렛반경을 수정하는데 그리고 속성표현은 리브와 웨브의 형태와 특성을 고려하여 블로커를 설계하는데 이용될 수 있다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 한국정보처리학회 2000년도 추계학술발표논문집 (상)
• /
• pp.227-230
• /
• 2000

건설 도면정보의 공유 및 교환은 건설 CALS/EC(Continuous Acquisition & Lifecycle Support /Electronic commerce) 환경의 필수적인 요소이다. 그러나 CAD 시스템의 버전변화와 별도의 한글처리로 인하여 도면정보의 관리 렌 활용에 많은 문제점이 발생하고, 상이한 CAD 시스템간의 파일 교환이 제대로 이루어지지 못하는 등 도면정보 교환을 위한 정보모델의 구축이 절실히 요구되고 있다. 이러한 환경에서 STEP(Standard for the Exchange of Product model data)은 건설 도면정보의 교환 및 공유를 위한 정보모델을 구축함에 있어서 그 활용 가능성이 높다. 본 연구에서는 STEP을 이용하여 건설분야에서 활용 가능한 2차원 도면정보 모델을 개발하고자 한다. 이를 위하여 STEP내의 AP 202를 기반으로, AP 214와 독일의 2차원 도면정보 표준화 프로젝트인 STEP-CDS를 참조하도록 한다. 그리고 실제 개발된 도면정보모델이 기존 CAD 도면 데이터를 제대로 표현할 수 있는지 검증하기 위하여 상용 CAD시스템인 AutoCAD Rl4의 DXF 데이터를 개발된 정보모델로 변환하여 그 결과를 검토하고자 한다. 세부적으로는 DXF 데이터의 도면정보모델로의 변환을 위하여 DXF 구조의 STEP 스키마를 정의한다. 이때 이 스키마와 도면정보모델의 스키마간의 매핑을 위하여 STEP내의 EXPRESS-X를 이용하기로 한다. 또한 도면정보 모델의 데이터의 뷰잉과 브라우징을 위하여 도면정보 뷰어를 개발한다.

• The Journal of Society for e-Business Studies
• /
• 제9권3호
• /
• pp.57-77
• /
• 2004

The main purpose of this study is to develop XML schemata and related STEP model for sharing construction drawings information. To achieve this purpose, the authors have developed a drawing information model based on STEP/AP202, the data searching mechanism based on STEP, and XML schemata for sharing and exchanging information between vector data and non-shape attribute information. Finally, the authors have suggested the way of sharing drawing information through linked STEP data and a XML schema using test cases of construction material information and code checking. The study shows a way of optimized managing and sharing construction information through the drawing information and external data for the whole building life-cycle, from early design stage to the construction stage.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• 제35권9호
• /
• pp.89-99
• /
• 2019

In the representation of buildings with continuous changes in the curved shape of the surface, countless plans or sections are required, or none of the traditional drawings can explain the geometry of it. In other words, in no case can an ordinary drawing achieve the efficient and clear communication capability which is inherent function of the drawings. As a result, the current architects are introducing their own way of drawing technique which is developed in accordance with a specific curved shape, construction method or company resources, but this is not what can be applied to other cases because it has not been ever shared or agreed in the industry. In this process, the drawing or construction of curved building has been recognized as the exclusive property of a specific expert, or the design and construction without the in-depth understanding of the technology have resulted in the appearance of poor buildings. Therefore, this study aims to present an elements and method that can convey shape information more effectively and clearly in the drawing representation of non-linear buildings and, thus, contributes to lowering the barriers to entry into the field by providing the information to be easily applied to related projects. In order to attain this goal, the drawings of recently completed projects of free form building are analyzed to reveal the method used to effectively express the shape information of the building and to derive new drawing elements that have not been applied to the existing drawings.

• Korean Journal of Heritage: History & Science
• /
• 제55권3호
• /
• pp.46-58
• /
• 2022

This study analyzed the documentation trend of garden components such as plants, infrastructure, unit facilities, and structures, based on 188 measurement drawings of 94 old houses in a report on the documentation of the national folklore cultural heritage. The findings are as follows. First, it was found that plants and structures continuously appeared as the subject of measurement drawings, while infrastructure was often omitted. It was confirmed that unit facilities, which are smaller than other components, were frequently excluded from the documentation subject as well due to frequent changes such as movement, loss, and expansion. Second, the level of expression in measurement drawings showed different aspects for each component. The unit facilities showed a large change over time with respect to the level of documentation, and the level of documentation was somewhat polarized, particularly toward the latter stage. This suggests that the level of documenting the drawings limited to specific facilities improved, but the overall level of drawings did not improve, such as a lack of diversification of expression techniques suitable for various unit facilities. On the other hand, it was confirmed that the level of documenting the drawings for plants, infrastructure and structures did not change to a significant degree, implying that no improvements were made to the expression of components. Third, as for the technique of detailed expression, in the case of plants, vegetation status was prepared without distinction of old or protected trees that have historical value. Above all, there was no record of the vegetation structure that could help grasp the vegetation landscape of the outer area. As for the infrastructure, there was no consistent expression technique to systematically convey topographic changes such as the height and slope of the land. In addition, since there was no subtype classification defined for unit facilities and structures, there was no subject or method of documentation. This study is meaningful in that it expanded the category of documentation, which has been concentrated on buildings in old houses, to gardens, and called attention to the need for documenting the gardens for the preservation and management of old houses as an integration of the building and outer area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제17권10호
• /
• pp.54-60
• /
• 2016

Building information modeling (BIM) has the advantage of having been utilized for various scenarios through a single model. Although extracting 2D drawings from BIM is one of the advantages, there are many difficulties when utilized in practical work. Architectural detail drawings are an important factor for expressing interior finishing materials and complicated construction methods, as well as for cost estimations. However, creating detail drawings does not have a standard, and each design company establishes its own detail drawings, so it is hard to share or exchange information in the construction industry. Therefore, this study suggests a systemized method for making detail drawings, and explains how it can be utilized as back data for quantity take-off and construction expenses linked with BIM libraries.

• Journal of the Korean Society for Precision Engineering
• /
• 제13권4호
• /
• pp.43-52
• /
• 1996

This paper describes interactive computer procedures for design the forming sequences in cold forging. This system is implemented on the personal computer and its environment is a commercial AutoCAD system. The programming language. AutoLISP, was used for the configuration of the system. Since the process of metal forming can be considered as a transformation of geometry, treatment of the geometry of the part is a key in process planning. To recognize the part section geometry, the section entity representation, the section coordinate-redius representation and the section primitive geometru were adopted. This system includes six major modules such as input module, forging design module, forming sequence design module, die design module, FEM verification module and output module which are used independently or in all. The sequence drawing wigh all dimensions, which includes the dimensional tolerances and the proper sequence of operations, can generate under the environment of AutoCAD. The acceptable forming sequences can be verified further, using the FE simulation.

• Journal of KIISE:Computer Systems and Theory
• /
• 제26권4호
• /
• pp.513-526
• /
• 1999

3 차원 입체 형상을 표현하기 위한 수단으로서 도면을 사용하는 방법이 생산현장에서 많이 활용되고 있다. 그러나 이 방법은 정투영 과정에서 정보 손실이 발생하기 때문에 3차원 후보 요소의 빈번한 조합 탐색 및 복잡한 기하 연산을 필요로 한다. 특히 , 이면도로부터 복원과정은 면도의 생략으로 인하여 수많은 허요소를 생성한다. 본 논문은 효율적인 허요소 축소를 통하여 이면도로부터 다면체를 바르게 복원하는 이단계 알고리즘을 제안한다. 1 단계에서는 이면도와의 정합성에 필수적인 최소한의 3차원 후보요소를 생성한후 , 정투영시 이면도와 일치하는 부분 물체를 복원한다. 2단계에서는 부분 물체에 직교면을 덧붙임으로써 기하학적으로 타당한 완전 물체를 복원한다. 실험결과를 통하여 제안방법이 기존 방법들에 비해 적은 수의 3차원 후보 요소를 생성시키면서 이면도로로부터 3차원 물체를 빠르게 생성하는 것을 보인다.

• The Journal of the Korea Contents Association
• /
• 제11권5호
• /
• pp.185-193
• /
• 2011

Companies, to establish a proper brand image of it, and to appeal to consumers effectively, mobilize advertisement and other publicity means through various communication media. In terms of access rates and degrees of interest of viewers among broadcast media, television is higher than other important media such as radio, newspaper, magazine, and DMB, etc. Since consumers get access to much commercials on television, television commercial activities of companies ultimately have effect on their brand images. Thus, this study, focusing on the screen image expression types among all the expression types of television commercials, examined what brand images consumers favor, and sought to know what characteristics in television commercials in Korea works as important factors in the formation of brand images.

• Transactions of the Korean Society of Mechanical Engineers
• /
• 제12권3호
• /
• pp.466-472
• /
• 1988

An algorithm and its computer program were developed for the computer aided automatic conversion from 2-D design drawing, which includes arbitrary curves, to a 3-D object, and the 3-D object obtained from the developed program was used to generate the tool path of NC milling machine. The algorithm and its computer program developed were applied to several real objects for their feasibility check and showed satisfactory results. Therefore, it was proved that the algorithm and its program developed can be applied to the CAM for the mechanical parts having arbitraily curved shapes by automatically generating its 3-D object. As a result of this study a basic theory for the integration of CAD/CAM was established which will prompt the improved quality and productivity.