• Special Issue of the Society of Naval Architects of Korea
• /
• 2005.06a
• /
• pp.144-150
• /
• 2005

The size of ship is being larger than the past in the shipping industry thanks to the increased quantity of goods transported by ship. Therefore, HHIC (Hanjin Heavy industries & Construction co., LTD) invented innovative construction method, so called 'DAM', to build a ship which is longer than the length of the HHIC's dry dock. On Erection at the sea by the application of DAM Method, Squeezing & Detachment of A/F film may occur as a result of the wave and the constriction between A/F film pre-applied on the side shell and DAM's Rubber Packing. Thus, the test for finding the minimum curing time of A/F film was performed to protect Squeezing & Detachment of A/F film on the hull. To verify the soundness of paint and to find the optimum condition during the erection period of the DAM, laboratory test was carried out under no immersion condition through the application of various coatings on the Rubber Packing. And two methods were selected from the results of laboratory test for actual MOCK-UP Test. In addition, the test for the film profile per temperature of silicone A/F coat and the film Squeezing was performed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.511-511
• /
• 2013

균일한 전기 전도성 및 우수한 광투과성과 내화학성을 갖는 탄소나노튜브(CNT) 기반의 투명전도막(TCF)은 기존의 ITO 박막보다 우수한 유연성을 갖기 때문에 차세대 플렉시블 디스플레이 소재로서 많은 관심을 모으고 있다. 특히 낮은 저항과 투과도가 일정하면서 투명 전도막의 내구성을 향상 및 유지 시키는 연구는 상업화에 가장 필요한 연구 분야이다. 본 연구에서는 PET기판을 이용한 탄소나노튜브로 제작된 투명전도막 위에 오버 코팅을 통한 물성에 따른 내구성 개선 및 유지를 연구하였다. 오버 코팅 물질로는 실리콘계 투명 하드코팅 소재를 기본으로 하고 용매 및 합성 온도을 제어하여 내구성을 개선하고자 하였다. 연구결과 CNT 코팅층과 오버 코팅층과의 젖음성이 물성 향상에 가장 많은 영향을 끼치는 것을 관찰하였고, 특히 젖음성이 증가할수록 투과도와 전기전도도가 향상되는 것을 확인하였다. 구조 분석결과, 이러한 젖음성에 가장 많은 영향을 주는 것은 용매의 비점과 비중 그리고 용질의 합성 온도 임을 확인하였다. 또한 오버코팅 물질 중 고비점 용매가 고온 고습 환경에서 240시간 이상 내구성 테스트 결과, 투명전도성 평가 지수(${\sigma}DC/{\sigma}OP$)가 향상되었고 또한 테스트 전후의 HAZE 변화율이 10%이하 임을 확인하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.82-85
• /
• 2004

Colloidal Silica(CS) HSA/2327과 methyltrimethoxysilane(MTMS), 1034A와 tetramethoxysilane(TMOS)/MTMS 간의 졸겔 반응조건이 코팅도막의 특성에 미치는 영향을 조사하기 위하여 CS종류, CS 대비 TMOS/MTMS의 함량비, 반응시간 등을 달리하여 졸을 합성하고, 합성된 졸을 slide glass에 코팅한 후 $300^{\circ}C$에서 경화시킨 도막의 특성들을 조사하였다. HSA/2327/MTMS에 의한 졸로부터 제조된 코팅도막은 졸 반응시간 의존성이 거의 없으며 반응초기부터 접촉각이 상당히 안정되어 있고 특히 낮은 MTMS 함량을 가진 졸들이 더욱 안정된 표면물성을 보였다. 1034A/TMOS/MTMS에 의해서 제조된 코팅도막은 적절한 소수성의 형성과 표면조도의 향상과 더불어 안정된 접촉각 양상을 나타내었다. 표면거칠기는 HSA/2327 혼합 CS계에 의해서는 반응시간이 길고 MTMS 함량이 높아질 때 비교적 표면조도가 나빠지는데 반응시간과 더불어 약간씩 증가하는 경향을 보였다. 1034A CS계에서는 반응시간과 MTMS 함량의 조건에 영향을 받지 않고 표면조도와 균질성이 우수하였다.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.614-620
• /
• 2012

Polyurethane prepolymers were prepared from poly (carbonate diol), isophrone diisocyanate and dimethylol propionic acid. Then, aniline terminated waterborne polyurethane dispersion (ATPUD) was synthesized by capping the NCO group of the prepolymer with aniline monomer. Subsequently, ATPUD and waterborne polyurethane dispersion (PUD), respectively, were blended with conducting polymer, poly (3,4-ethylenedioxythiophene)/polystyrene sulfonate [PEDOT/PSS], to yield antistatic coating solutions, and the mixture was coated on the polycarbonate substrates. At adequate addition amounts of PEDOT/PSS less than or equal to 2.5 g, the surface resistances ($1.0{\times}10^{11}{\sim}2.5{\times}10^8{\Omega}/cm^2$) of coating films from ATPUD showed better electronic conductivities than those ($5.0{\times}10^{11}{\sim}6.3{\times}10^9{\Omega}/cm^2$) from PUD. However, at excess amount of PEDOT/PSS of 3.0 g, the surface resistance from ATPUD showed similar electronic conductivity with that from PUD.

• Polymer(Korea)
• /
• v.38 no.3
• /
• pp.371-377
• /
• 2014

The effect of modification conditions on the physical properties of polydimethyl siloxane modified epoxy (PDMSME) was investigated. The number of ring opened epoxy attached to polydimethylsiloxane (PDMS) by silane coupling agent affected the physical properties of undercoating materials. The flexibility of thin coating was enhanced by PDMSME and the increase of ring opened epoxy attached to PDMS resulted in the increase of hardness by the crosslinking in the present with moisture. The higher molecular weight of PDMS caused the lowering of hardness while the surface contact angle increased due to the high silicone content in PDMS. The viscosity of silicone modified epoxy coating materials decreased with increasing of molecular weight of PDMS due to the lowering of entanglement of PDMSME molecules by acetone solvent and consequently, the smooth undercoated surface was obtained.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.261-271
• /
• 2016

We have investigated relationship between particle characteristics of oyster shell powder pigments and their performance such as workability and durability. Three types of the powder which have different particle size and shape(spherical, elliptical, columnar and irregular) distributions were made for this study and we evaluated spreadability and uniformity for workability, and adhesion and surface hardness for durability of painted films by each powder paints. As a result, we found out that the workability and durability of the paints were influenced by the particle shape distribution more than the particle size distribution. The durability, especially, was enhanced as the ratio of columnar particles in the powders was increased. This result verifying the important factor affecting the durability can be base data for selecting oyster shell white paint and assessing its quality for conservation and restoration of Dancheong, as well as to produce high quality traditional paints.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.6
• /
• pp.91-98
• /
• 2009

One role of waterproofing work is to block external moisture and water. Defects in waterproofing work in building construction brings on huge repair costs for related construction work as well as for the waterproofing layer itself. However, we don't have a quantitative probabilistic management method for waterproofing work to successfully anticipate and prevent defects. From an analysis of the literature and prior research, defects in the waterproofing work in the underground parts of buildings occur frequently. We selected Fluid-Applied Membrane waterproofing work as representing waterproofing work in the underground parts of a building, and researched the general types and causes of defects. In this study, we developed the Relative-FMEA (Failure Mode and Effect Analysis) approach that merges the Matrix method and FMEA. From a survey of experts, we deduced the most important management factors for Fluid-Applied Membrane waterproofing work for the underground parts of buildings.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.455-461
• /
• 2018

The purpose of this study is to evaluate the tensile strength performance of the polyurethane coating material used as the waterproofing material in concrete structures. A linear regression equation is proposed to establish a correlation on the tensile strength of polyurethane coating membrane against periodic exposure to chemical degradation. The polyurethane film membrane showed a minimum strength of 23% to a maximum of 38% when subjected to chemical degradation. The elongation rate showed a relation with the tensile strength deterioration rate of at least 15% to 22% at maximum, and the proposed regression equation could be used to predict the degree of performance change of the polyurethane coating membrane under chemical degradation condition.

• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.247-252
• /
• 2017

Hydrophilic coating solutions were prepared by reacting a silane coupling agent, aminosilane with colloidal silica (15~20 nm in diameter). Hydrophilic coating films were also obtained by depositing the hydrophilic coating solutions on polycarbonate substrates by dip-coating and subsequently by thermal curing at $120^{\circ}C$. During this process, the effect of types of aminosilane was studied on the properties of coating films. As a result, coating films, prepared with 3-aminopropyltriethoxysilane (APTES) as aminosilane, showed contact angles of $25{\sim}44^{\circ}$ and a poor pencil hardness of B. On the other hand, coating films, prepared with 3-aminopropyltrimethoxysilane (APTMS) as aminosilane, exhibited contact angles of $26{\sim}37^{\circ}$ and a good pencil hardness of 2H.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.344-347
• /
• 2012

본 논문에서는 적외선 반사기능을 가지는 황색, 흑색안료를 PVDF, 첨가제와 배합하여 링밀에서 3,000rpm으로 10분간 분산한 후 세라믹 결정구조의 차열도료를 제조하였으며, 도막형성 후 $180^{\circ}C$에서 10분간 건조하여 도료에 대한 표면온도, 내후성(Q.U.V), 적외선 반사율(%)을 평가하였다. 연구결과 황색안료 9%를 첨가하여 $150{\mu}m$ 두께의 도막을 형성시켰을 때, 일반도료와의 표면온도 차이는 $10.1^{\circ}C$, 700~2,500nm 파장대의 적외선 반사율은 40% 이었으며, 흑색안료 9%를 첨가하여 $200{\mu}m$ 두께의 도막을 형성시켰을 때, 표면온도차 $18.8^{\circ}C$, 적외선 반사율 66.7%로 측정되었고, 내후성은 모두 우수하게 나타났다.