• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5D
• /
• pp.587-595
• /
• 2009

Since October 11th, 2007, water taxi service in Han River has been operated for commuting and sightseeing. However, it is less popularized than expected because of economical problem and accessibility. Therefore, this paper develops service estimation items for water taxi based upon literature review on public transportation. It also conducts survey questionnaire and IPA (Importance Performance Analysis) Analysis to analyze service characteristics of water taxi users and provide several implications. The results are follows: First, economical problem should be solved out as showed in the 'main improvement' item. Second, accessibility, informativeness and convenience in the 'required improvement' item, and security and punctuality in the 'keep up the good work' item are presented. Third, kindness and soundness are showed in the 'the maintenance of current situation' item. All in all, if municipal considers economical problem, accessibility, informativeness, and convenience as it improves water tax service, it will make it possible to attract more water taxi users.

• Journal of Navigation and Port Research
• /
• v.32 no.5
• /
• pp.321-326
• /
• 2008

Recently the large sea bridge's construction crossing harbor and main ship's route have been propelled in the domestic so that it is active for the smoothly traffic flow of inland transportation and road user's convenience. However, it can bring about the trouble to ensure marine traffic safety if it is built that sea bridge's construction sets to an economy principle in the extension of the land road system. We're adopting Ship Handling Simulation in representative method for the influence assessment of marine traffic safety and danger elements beforehand. This research attempts to show the problems through the comparison and analysis of the reports relating to the sea bridge construction for 4 organization possessing Ship Handling Simulation. Finally, We offer the necessity of standardization on performing and assessment method of simulations.

• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.163-172
• /
• 2010

There are many efforts for expanding bikeway plans and increasing bike utilization. In this study the authors try to find the primary factors that affect bike users' satisfaction under limited budgets. As satisfaction is a qualitative variable, the authors developed a bike user satisfaction model by using structural equation methods. The bikeways are distinguished between bike lanes on public roads and exclusive bikeways along the Han River, as the characteristics and attributes should be different. The model shows bikeways on public road have a user satisfaction equal to 0.248*(safety)+0.405(accessibility). Bikeways along the Han River have a user satisfaction equal to 0.437*(accessibility)+0.405*(economic feasibility). In both types, accessibility affects satisfaction. Safety in more important to users on public roads, while economic feasibility affects those on the Han River bikeways.

• Journal of Korean Society of Transportation
• /
• v.25 no.3
• /
• pp.77-85
• /
• 2007

The number of accidents occurring at railway crossings is less than the accidents on other sections of roads but they cause enormous socio-economic damages. The geometric aspects of the railway crossing have to allow the drivers to recognize the crossings and take precautions against collisions. Therefore, ensuring visibility for the vehicle approaching the railway crossing is necessary for safe operation of the crossing. However, as there is little research related to railway crossing visibility in Korea. validating visibility and maintaining visibility based on the validation is badly needed. This research develops a visibility validation model to support improving visibility and to reduce accidents at railway crossings to improve safety for the crossing users.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.6 s.58
• /
• pp.97-105
• /
• 2009

This study was conducted for the purpose of examinating the safety and economical efficiency of large high tension bolted joints. The specimen using F10T-M30 large high strength bolts has been selected and static tensile test has been conducted to evaluate the slip characteristics. In addition, finite element analysis has been carried out to estimate the number of required bolts. As a result, the average slip coefficient of M30 high strength bolts exceeded 0.4 - the standard in highway bridge design specification - and has satisfied the slip strength, which is the same as that of M22 high strength bolts. In addition, if F13T-M22 high strength bolts were applied, the number of required bolts decreased by 21%, and if F10T-M30 high strength bolts were applied, the number of required bolts decreased by 46%, that leads to the conclusion that the economical efficiency in accordance with diametering of high strength bolts was now verified.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.2
• /
• pp.92-99
• /
• 2008

The rapid economic growth in Korea raised the increase of transportation demands about the passengers and the goods, and caused the concentration on cities. By the rise of a nation's income level, a automobile is necessary in our modern life. However, the traffic delays and traffic accidents that are raised by automobiles decrease the evaluation about a nation's economy and then the government practices the traffic safety improvement project. In this study, by performing the improvement project, we expect to achieve the following objectives. First, this study analyses the degree of effectiveness whether or not success in the improvement. Second, to supply the data on the effectiveness of the improvement and to inform the necessity of improvement. Third, to supply the information on the improvement project to the parties concerned. In this paper, through the study about identification of high accident locations, the effectiveness for the number of accidents and accident rates before-after the improvement is analyzed. Also, the B/C analysis about this locations is performed. This study shows that the number of accident and accident rates are decreased after the improvement, and there is economic validity about improvement of high accident locations.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.138-147
• /
• 2018

With the recent series of damage caused by earthquakes in Korea, such as Gyeongju and Pohang, we know that Korea is no longer a safe zone for earthquakes and that we need to be prepared for them. In addition, bridges built prior to the introduction of seismic design concepts remain without adequate seismic reinforcement measures, and earthquake reinforcement should be performed efficiently considering economic and structural safety. Preliminary assessment of seismic performance of existing bridges is divided into four seismic groups, taking into account seismicity, vulnerability and Impact, considering the magnitude of the existing bridge's seismic, and prioritization for further evaluation of seismic performance. In this study, unlike the existing anti-seismic reinforcement priority method, scores are calculated based on the seismic design criteria applied to bridges, importance coefficient of the bridge including the zone coefficient and the Importance, vulnerability index of the bridge including the soil condition and the elapsed years, detail coefficient of the bridge including the superstructure form, the span length, the width, the height, the design load, and the daily traffic volume. The calculated score items will be weighted and grouped according to the results. Using this, a simpler and more efficient algorithm was proposed to determine the priority of seismic reinforcement on a bridge.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.2 s.32
• /
• pp.45-50
• /
• 2005

Recently, slope failures are disastrous when they occur in mountainous area adjoining highways. The accidents associated with Slope failures have increased due to rapid urbanization of mountainous area. Therefore, the inspection of slope is conducted to maintain road safety as well as road function. In this study, we apply to the remedy which is comparing existent description to advanced technology using GIS. we utilize a 3D scanner, one of the advanced method, to generate precise and complete road slope model from expert point of view. In result, we are transferred practical data from external slope stability to hazard slope information. We suggest not only the database but also the method of road risk evaluation based on GIS.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.169-175
• /
• 2006

Recently, slope failures are disastrous when they occur in mountainous area adjoining highways. The accidents associated with slope failures have increased due to rapid urbanization of mountainous area. Therefore, the inspection of slope is conducted to maintain road safety as well as road function. In this study, we apply to the remedy which is comparing existent description to advanced technology using GIS. We utilize a Terrestrial LiDAR, one of the advanced method, to generate precise and complete road slope model from expert point of view. In result, we extract hazardous slope information from external measurements referring to the evaluation criteria of external slope stability. We suggest not only the database but also the method of road risk evaluation based on internet GIS.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.1 s.35
• /
• pp.85-91
• /
• 2006

Recently, slope failures are happen to natural disastrous when they occur in mountainous areas adjoining highways in Korea. The accidents associated with slope failures have increased due to rapid urbanization of mountainous areas. Therefore, Regular maintenance is essential for all slope and needs maintenance of road safety as well as road function. In this study, we take priority of making a database of risk factor of the failure of a slope before assesment and analysis. The purpose of this paper is to recommend a standard of Slope Management Information Sheet(SMIS) like as Hazard Map. The next research, we suggest to pre-estimated model of a road slope using Logistic Regression Model.