• International Journal of Highway Engineering
• /
• v.5 no.2 s.16
• /
• pp.1-14
• /
• 2003

This study is a fundamental research for developing self-deicing function of snow-melting asphalt concrete for roadway pavement. The objective of this study is to develop technology of making self-snow-melting asphalt pavement and evaluate properties of the asphalt concrete containing deicers. Asphalt concrete with deicers and CRM was produced by dry process. The $\alpha$-deicer, CRM and F-deicer were used for sand asphalt mixtures of thin-layer pavement on the existing pavement. The $\alpha$-deicer, $\beta$-deicer, CRM A, CRM B and C were used for 13mm dense-graded mixtures on surface course. Penetration grade of 60-80 asphalt was used for asphalt mixtures. Marshall mix-design, indirect tensile strength, freezing and thawing test, analysis of extracted water were carried out to evaluate performance of self deicing function of asphalt mixtures. The study result showed that snow-melting asphalt mixtures had not only good mechanical characteristics and good snow-melting function, but also chemically safe in environmental point of view.

• International Journal of Highway Engineering
• /
• v.8 no.1 s.27
• /
• pp.55-64
• /
• 2006

Deicing work is usually considered as a main part of winter road management activity. The deicing includes the physical method which removes snow with tools and the chemical method which melts snow with deicing materials. When removing snow using deicing materials, using excessive deicing materials will cause the environment and budget problems. When deicing materials are used less than the required amount, snow will remain on the road surface. In this research, the performance of deicing marerials has been evaluated and the amount of deicing materials has been determined by the laboratory and the field experiments. Also the adequate usages of deicing materials has been proposed.

• Journal of Korean Society of societal Security
• /
• v.3 no.1
• /
• pp.43-50
• /
• 2010

Sliding accidents on the road have a high percentage by road freezing, especially, they often have appeared at bridges and Tunnel of freezing areas. Thus, the stability of road operations is enhanced by preventing partial freezing phenomenon. According to the geothermal snow melting system analysis, a pattern of thermal conductivity is found out; pavement materials of concrete and asphalt where the system is buried. The heat transfer simulation is essential when the geothermal snow melting system is applied according to heating exchanger pipe placed in the lower pavements. The model tests are conducted on low temperature in freezer using the manufactured test model which is equal to pavement materials. Many variables are discovered from numerical analyses under the same conditions with model test.

• Construction Engineering and Management
• /
• v.13 no.3
• /
• pp.34-36
• /
• 2012

• Magazine of the Korean Society of Hazard Mitigation
• /
• v.10 no.4
• /
• pp.24-30
• /
• 2010

• 한국도로학회:학술대회논문집
• /
• 2010.09a
• /
• pp.53-56
• /
• 2010

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.95-102
• /
• 2011

Anti-icing system can immediately respond when snowing is expected or the snow comes down on the road surface. It has been recognized that the system can reduce traffic accidents and congestion by quickly removing the frozen road surface area. However, it is very difficult to implement this system due to the expensive equipment installation and operation cost, Recently, there was a developed program for predicting the freezing area using three-dimensional model and tracking the sun path. But, there is no objective analysis method and all developed approaches are different so that the general standard of anti-icing system is needed. In this study, we proposed the decision criteria for determining application priorities of the anti-icing system based on weather and road conditions, i.e., geometric and topographic conditions. Regional climate survey, topographical analysis, and dynamic vehicle simulation considered road geometry and skid resistance was conducted to standardize the installation method of anti-icing system.

• 한국도로학회:학술대회논문집
• /
• 2010.09a
• /
• pp.333-338
• /
• 2010

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1251-1255
• /
• 2009

Snow melting system is adapted for safety and environment sides. Geothermal System has some problem of unbalance between summer and winter heat loads. Snow melting system with piping system is widely adapted in Japan. In this paper, the variation of road surface temperature along time for heating load is investigated. And for checking the difference between electrical melting system and piping melting system, other design parameters is investigated.

• Disaster Prevention Review
• /
• v.13 no.4
• /
• pp.158-159
• /
• 2011