• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.2
• /
• pp.117-128
• /
• 2005

This study presented the route location method by applying AHP and evaluating quantitatively. This study developed the program that can be easily applied to this kind of road design, and built the decision support system fur route location. The study results are summarized as follows : We could quantitatively evaluate the appropriateness of exiting routes by applying the AHP based on GIS. If we apply this to the roads that will be newly constructed, we can make the objective and reliable route location when making road plans and basic designs. We improved the technique of route location by applying the decision support system with third-dimensional data, which considers even the vertical alignment plan, to the existing decision support system with second-dimensional data. had, since we call set those data such as vertical slope, earth-volume, structure size, location and construction cost to independent variables, we can make road designs more scientifically and reasonably.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.4
• /
• pp.1-10
• /
• 2022

Attempts to interpret human perspectives using computer vision have been developed in various fields. In this paper, we propose a method for evaluating the walking environment through semantic segmentation results of images from road images. First, the Kakao Map API was used to collect road images, and four-way images were collected from about 50,000 points in JeonJu. 20% of the collected images build datasets through crowdsourcing-based paired comparisons, and train various regression models using paired comparison data. In order to derive the walkability score of the image data, the ranking score is calculated using the Trueskill algorithm, which is a ranking algorithm, and the walkability and analysis using various regression models are performed using the constructed data. Through this study, it is shown that the walkability of Jeonju can be evaluated and scores can be derived through the correlation between pixel distribution classification information rather than human vision.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.472-472
• /
• 2021

우리나라는 하천법 제10조, 소하천정비법 제3조에 하천기본계획 수립 또는 하천의 지정 및 변경고시 시 하천구역을 결정하도록 정의되어 있다. 하천구역 설정 시 일반적으로 하천의 제방이 위치하는 부지 및 제방하심측 토지경계를 하천구역으로 지정하고 있으나, 제방계획이 없거나 무제부 구간으로 활용되고 있는 구간의 경우 하천법 제10조 3항에서 5항까지 3가지 항목을 기준으로 계획하폭에 해당하는 토지, 댐·하구둑·홍수조절지·저류지의 계획홍수위 아래에 해당하는 토지경계, 철도·도로 등 제방의 역할을 하는 선형공작물 하심측 토지경계로 구분하고 있다. 하천구역의 경계설정의 경우 불연속적인 특징을 갖는 하천의 횡단측점 자료의 특성상 정확한 평면상의 경계를 파악하기 어렵고, 철도·도로 등 선형공작물 경계를 하천구역으로 설정 시 편입용지의 보상이 상이하고 모호한 기준으로 인해 다량의 민원이 발생하는 실정이다. 본 연구에서는 부산시에 위치한 지방하천 대천천을 대상지로 설정하였으며, 계획홍수위를 기반으로 홍수범람예상도를 작성하여 정밀계획홍수위선을 산출하고 이를 지형자료와 중첩하여 계획홍수위 경계를 추출하였다. 또한 무제부 구간 내 드론촬영을 실시하여 대상지 드론영상 기반 3차원 정밀 지형자료를 구축하고 이를 앞서 산정한 계획홍수위 경계자료와 중첩하여 정밀 하천구역을 설정하였다. 대상지 정밀 하천구역 산정 결과를 기반으로 도심지내 하천과 도시외곽 하천으로 구분하고 다시 도심지내하천은 암거(복개)구간과 개거구간, 도시외곽하천은 유제부와 무제부 구간으로 구분하여 정밀 하천구역 결정기준을 수립하였다. 본 연구를 통해 대천천유역을 대상으로 실시한 무제부 구간 하천구역 결정과정을 기반으로 하천유형별 3차원 하천구역 산정기법을 정립하였다. 향후 해당기법을 실무에 적용하여 하천구역 산정 시 모호한 하천경계부분 또는 토지소유주와 담당부처 간 하천구역 논의 시 기반자료로 활용될 수 있을 것으로 사료되며, 기본계획 수립 시 해당 기법 적용을 통해 보다 정확한 하천구역 경계 수립이 될 수 있을 것으로 기대된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2A
• /
• pp.339-349
• /
• 2006

The purpose of this study is to investigate the seismic behavior of circular reinforced concrete bridge piers with confinement steel and to provide the data for developing improved seismic design criteria. Fourteen circular reinforced concrete bridge piers were tested under a constant axial load and a cyclically reversed horizontal load. The accuracy and objectivity of the assessment process may be enhanced by the use of sophisticated nonlinear finite element analysis program. A computer program, named RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology), for the analysis of reinforced concrete structures was used. In the companion paper, the proposed numerical method for the seismic performance assessment of circular reinforced concrete bridge piers with confinement steel is verified by comparison with experimental results.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.6
• /
• pp.17-24
• /
• 2002

Dynamic behaviors of a bridge system with several simple spans are evaluated to examine the effects of nonlinear abutment motions upon the seismic responses of the bridge. The idealized mechanical model for the whole bridge system is developed by adopting the multi-degree-of-freedom system, which can consider various influential components. To compare the results, both linear and nonlinear abutment-backfill models are prepared. The linear system has the constant abutment stiffness, and the nonlinear system has the nonlinear stiffness considering the abutment stiffness degradation due to the abutment-soil interaction. From simulation results, the nonlinear abutment motion is found to have an important influence upon the global bridge motions. Maximum relative distances between adjacent vibration units are found to be larger than those found from the linear system. In particular, maximum relative distances at the location with the highest possibility of unseating failure are increased up to about 30% in the nonlinear system. The effects of nonlinear behavior of an abutment on the bridge seismic behaviors are also increased as the number of span increase. Therefore, it can be concluded that the abutment-soil interaction should be considered in the seismic analysis of the bridge system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.3
• /
• pp.237-246
• /
• 2020

Recently, as high resolution satellites data have been serviced, frequent DSM (Digital Surface Model) generation over urban areas has been possible. In addition, it is possible to detect changes using a high-resolution DSM at building level such that various methods of building change detection using DSM have been studied. In order to detect building changes using DSM, we need to generate a DSM using a stereo satellite image. The change detection method using D-DSM (Differential DSM) uses the elevation difference between two DSMs of different dates. The D-DSM method has difficulty in applying a precise vertical threshold, because between the two DSMs may have elevation errors. In this study, we focus on the urban structure change detection using D-nDSM (Differential nDSM) based on nDSM (Normalized DSM) that expresses only the height of the structures or buildings without terrain elevation. In addition, we attempted to reduce noise using a morphological filtering. Also, in order to improve the roadside buildings extraction precision, we exploited the urban road network extraction from nDSM. Experiments were conducted for high-resolution stereo satellite images of two periods. The experimental results were compared for D-DSM, D-nDSM, and D-nDSM with road extraction methods. The D-DSM method showed the accuracy of about 30% to 55% depending on the vertical threshold and the D-nDSM approaches achieved 59% and 77.9% without and with the morphological filtering, respectively. Finally, the D-nDSM with the road extraction method showed 87.2% of change detection accuracy.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.4
• /
• pp.49-57
• /
• 2009

The governmental investment to SOC facilities currently has increasedthe construction of new roads and the consistent extension of already-existing roads or the line-shape revision of those roads. As a result, the road cut slopes have been increasingrapidly. Unfortunately, human-life damages and property damages frequently occur due to the rockfall and the landslide every year. To reduce those damages, many studies have been performed. The present regulation regarding rockfall protection facilities follows the "Guide for Installation and Management of Road Safety Facilities" issued by MLTM (the Ministry of Land, Transport, and Maritime Affairs) that indicates the standard size of facilities and energy absorbing efficiencies. Most domestic road slopes use standardized rockfall protection facilities based on the regulation. However, there have been doubted about the effectiveness of rockfall protection facilities and the damages caused by rockfalls havebeen increasedevery year. Thus, it seems that relevant studies are necessary on the rockfall protection net being capable of supporting rockfall energies. Accordingly, this study reviews previous literature to investigate the function and the feature of rockfall protection nets and analyzetheir limitations by each type. After that, by using the pullout test device for a rockfall protection net, an experiment on the PVC coating net and the expanded metal is performed under the exact same condition. Finally, the features of the Expended metal is explained with the comparison analysises of load-variation and the confirmation of damaged forms. As a result, there have been founded the problemsof net breaking down and not being able to support due to PVC coating net's material property of disintegration. On the other hand, the Expanded Metal might be expected as a substituteof rockfall protection net according to its capability of support and integration.

• Journal of Environmental Impact Assessment
• /
• v.27 no.2
• /
• pp.152-169
• /
• 2018

The purpose of this study was to analyze the effect of adjacentroads on the concentration of negative air ions in urban neighborhood park. The measured factors were negative air ion concentration, positive airion concentration, airtemperature,relative humidity, wind speed, green formation volume factor (GVZ) and distance from highway and general road. The mean negative air ion concentration was $206ea/cm^3$ and the positive air ion concentration was $416ea/cm^3$ in the influence zone of roads. On the other hand, the mean negative air ion was $339ea/cm^3$ and the positive air ion was $229ea/cm^3$ in the unaffected zone of roads, which are inner areas of the park. The difference of the negative air ion concentration according to the influence of the road was statistically significant. The negative air ion concentration model was presented by integrating the correlation analysis with the influence factors, and the explanatory power of the model was increased by adding the influence factor of the road.

• Journal of KIISE:Databases
• /
• v.33 no.3
• /
• pp.283-298
• /
• 2006

The TPR-tree is the time-parameterized indexing scheme that supports the querying of the current and projected future positions of such moving objects by representing the locations of the objects with their coordinates and velocity vectors. If this index is, however, used in environments that directions and velocities of moving objects, such as vehicles, are very often changed, it increases the communication cost between the server and moving objects because moving objects report their position to the server frequently when the direction and the velocity exceed a threshold value. To preserve the communication cost regularly, there can be used a manner that moving objects report their position to the server periodically. However, the periodical position report also has a problem that lineal time functions of the TPR-tree do not guarantee the accuracy of the object's positions if moving objects change their direction and velocity between position reports. To solve this problem, we propose the query processing scheme and the data structure using road networks for predicting uncertainty positions of moving objects, which is reported to the server periodically. To reduce an uncertainty of the query region, the proposed scheme restricts moving directions of the object to directions of road network's segments. To remove an uncertainty of changing the velocity of objects, it puts a maximum speed of road network segments. Experimental results show that the proposed scheme improves the accuracy for predicting positions of moving objects than other schemes based on the TPR-tree.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.17-33
• /
• 2005

Highway design speed is a very important design element which determines highway design level. When determining highway design speed, one would estimate it utilizing the most likelihood of design speed and vehicle operating speed relationship. Existing operating speed prediction models only include highway geometric characteristics and their impacts on speed, which usually can not consider the impact of highway design speed on surrounding roadway environment and land use pattern. If this happens, excessive highway construction cost and huge environmental impact can occur. In this research project, a new vehicle operating speed prediction model was developed which can reflect the effect of surrounding roadway environment into vehicle speed prediction. The followings are the research findings : Firstly, highway terrain types and land use pattern on national roads were classified and integrated into drivers' visual recognition pattern. This was performed using a data management software. Secondly, the developed highway terrain types and land use pattern were related to vehicle speeds and it was found that there were significant statistical differences among vehicle speed for each different terrain and land use pattern. Thirdly. the General Linear Model analysis was employed to analyze the effects of highway geometric features, terrain types, and land use patterns. For two-lane highway and four-lane highway tested in this research project, it was found that R squares were 0.67 and 0.85, respectively. Additionally an optimal highway design speed range table, based on this research project. was proposed for practical use. This table can be reliably used on South Korean national road design, but discretion is required for applying this table to other types of highways including provincial roads and municipal roads.