• International Journal of Highway Engineering
• /
• v.11 no.3
• /
• pp.75-83
• /
• 2009

A need still exists to evaluate the durability performance of cemented gedmaterials in road constructions using various cementing binders due to seasonal changes in fields as well as structural performance. In this paper, durability characteristics of stabilized granular base and subgrade materials, which is widely used in korea, was assessed using a laboratory repeated load resilient-deformation test under various freezing-thawing and wet-drying cyclic conditions. In addition, various resilient modulus models were adopted based on the test results. As a result, the estimated model coefficients agree well with the values from the literatures.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.713-716
• /
• 2008

This study is performed to propose a standard to evaluate fire protection assessment for concrete structures during a fire on road tunnel. Recently, a number of road tunnels have been rapidly increased and fire risk also multiplyed according to extend tunnel length, due to natural features and environmentally-friendly road construction in domestic. But we have not yet been prescribed appropriate time-temperature curve for tunnel fire. Therefore we presented fire design model and investigated time-temperature curve proposed by a foreign country considering traffic, a kinds of vehicles which are a basis of heat rate.

• Journal of Korean Society of Transportation
• /
• v.16 no.2
• /
• pp.133-144
• /
• 1998

양방향 2차로 도로는 우리나라 전체 포장도로 연자의 84%를 차지하고 있다. 양방향 2차로 도로의 효율성 및 교통류의 운영상태를 파악하기 위한 서비스 수준 척도로 지체시간의 백분율이 많이 사용되고 있다. 지체시간의 산정은 특정 도로 설계구간을 추원금지구간으로 설계할 것이지, 예산을 더 투자하여 선형을 개선함으로써 추원가능 구간으로 설계할 것인지에 대한 판단 기준을 제시할 수 있기 때문에 도로설계과정에 있어서 매우 중요하다. 본 연구에서는 저속차량의 확률적 분포를 고려하여 추원금지구간에서 발생하는 지체시간을 산정할 수 있는 모형을 제시하였다. 모형식이 기존에 확률적 분포를 고려하여 추월금지구간에서 발생하는 지체시간을 산정할 수 있는 모형을 제시하였다. 모형식이 기존에 개발된 거시적 수학적 모형에 비해 비교적 단순하고 입력변수도 수집이 용이한 점이 특징이라 할 수 있다. 모형의 신뢰성을 현장데이터를 이용하여 검증한 결과, 모혀으이 예측값이 근사적으로 츠덩한 실제 지체시간을 포함하는 긍정적인 결과를 도출하였다. 그러나 모형의 예측값 범위가 넓어 실용적인 MOE로 사용하기에 다소 무리가 있을 것으로 판단되므로, 개략적인 평가기준으로 모형이 예측한 값의 평균값을 보정하여 사용할 것을 제안한다. 모형의 신뢰성을 높이기 위해서는 본 연구에서 가정한 확률분포식에 대한 추가적인 검증이 필요할 것으로 판단된다. 본 연구는 실제 상황을 표현하는데 있어 확률적 개념의 도입과 이러한 새로운 접근방법의 기초를 마련한 측면에서 의미를 갖는다. 또한, 양방향 2차로 도로에서의 지체시간은 실제 소요시간과 자유운행시 즉 다른 차량의 영향을 받지 않았을 때의 속도 및 운영시간과의 차이로 정의한 바, 실제 지체시간을 현장자료를 통해 구하기란 현실적으로 불가능하므로, 본 연구에서는 이러한 제약점을 극복할 수 있는 근사적인 지체시간을 계산하는 방법을 제시한 점에서 의미를 갖을 수 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.180-180
• /
• 2021

가로수는 「도로법」 제11조에 따른 도로(고속국도를 제외한다)와 보행자전용도로 및 자전거전용도로 등 대통령령으로 정하는 도로의 도로구역 안 또는 그 주변지역에 심는 수목을 말하며, 도시의 가로수는 기후조절효과 및 대기오염 정화효과 등을 가질 뿐 아니라 도심지 내에 녹색을 도입하고 도시경관을 구성하는 주요 요소이다. 전국 각 시도에서는 가로수 조성사업을 지속적으로 추진하고 있다. 하지만 몇몇 도시에서는 적절하지 않은 가로수 관리로 인해 가로수가 말라죽는 현상이 증가하고 있다. 이에 가로수 고사 현상을 감소시키기 위하여 토양수분과 토양온도를 측정하여 가로수 피해와 연관성을 조사할 필요성이 있다고 판단하였다. 본 연구는 춘천시에서 진행하였으며, 일반 가로수와 현재 가로수 고사로 문제가 되고 있는 3 모니터링 지점을 선정하고, 토양수분 센서를 5, 15, 40 cm 깊이에 설치하였다. 센서를 이용하여 토양수분과 지온, EC 모니터링을 실시하였다. 토양수분 모니터링 자료를 활용하여 토층별 토양수분 소비량 산정을 하고, 현장 토양시료를 채취하여 물리·화학적 특성을 분석하였다. 또한 가로수 증발산량 산정 및 토층별 토양수분 소비량과 소비패턴을 비교하였다. 본 연구 결과를 향후 RZWQM(Root Zone Water Quality Model) 모델의 기초자료 및 시나리오 구성에 활용될 수 있으며, 모니터링 및 모델링 결과를 활용하여 가로수 및 도시 표토 기능 위협 요인을 분석에 활용 될 수 있다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.59-74
• /
• 2021

The domestic road space is reaching the limit of planar space distribution, and Increasingly, the importance of three-dimensional space distribution through the development of underground space. therefore, In this study, a study was conducted on a traffic control method that can safely induce two different traffic flows in the connection between the ground road and the underground road. Through VISSIM, we calculated the appropriate amount of outflow and inflow traffic compared to the capacity of the main line when there is a Merge/Diverge section in the underground road. and Through the analysis of the number of conflicts, the appropriate traffic control level for safety in the underground, A basic study was conducted on the level of risk in the underpass according to the level of delay in the ground part through the analysis of the delay scenario of the ground road.

• International Journal of Highway Engineering
• /
• v.5 no.4 s.18
• /
• pp.23-35
• /
• 2003

In this study, compaction evaluating program based on ASTM critria is developed bu analyzing the results of laboratory tests. And the laboratory tests such as compaction test, triaxial test and resonance column test of subgrade soils are performed to develop compaction management methodology at seven test sites. Especially, to figure out chararteristic with changing compactive efforts, the test was carried out at five levels of compactive efforts at each soil sample. Database was set up from the test results. With the methodology using mechanical property - the elastic modulus, the gap between road design and management and road construction management is narrowed. The regression equation of G/$G_{max}$ is proposed at each strain level of subgrade soils according to AASHTO criteria, and the relationship between fundamental properties of soil mass and degree of compaction is derived as well. The development of compaction management and field compaction management method is proposed by the elastic modulus based on mechanical tests.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.57-65
• /
• 2011

In this study, estimated the minimum lane width for the curved section by analyzing of lateral sway distance and compared the lane width for result of this study and a precedent study for straight section on urban roads. Then suggested minimum lane width of road alignments and vehicle classes. The lane width of curved section that was investigated was 2.79m~3.40m. Analysis of frequency distribute and cumulative frequency distribution for lateral sway distance on the basis of 85% of the suggested vehicles. The result of study, minimum lane width for the curved section was 2.31m~2.58m in the case of small size car and 2.80m~3.27m in the case of large size car. Result of this study is judged that it is necessary to case for introduction of green transit, during road construction and construct a road for small size car. Expect result of this study can be used for the application of flexible design standard according the purpose of road designer.

• Journal of Korean Society of Transportation
• /
• v.24 no.3 s.89
• /
• pp.125-131
• /
• 2006

Recently, flowerbed median strips are being installed in urban highways for safety and scenery. In addition, efforts to enhance urban image through roadside flowerbeds and trees are being exerted for afforestation to enhance the urban environment. The sensibility of humans, such as the feeling of agreeableness of drivers must be considered when planning roads. However, not many researches on users on road environment are being conducted. Accordingly, KANSEI Engineering that is attracting attention nowadays was applied to form the image or sensibility of humans as definite object, in order to grasp the relation between the personal attributes of users and road formation with sensible factors considered when the road users evaluates the road scenery. As the result of research, streetscape was not evaluated based on individual factors such as roads, trees and buildings that form roads, but was based on sensibility image based on harmony of the overall road formation according to the changes of each factors.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.231-237
• /
• 2008

One of the basic requirements for the most advanced countries would be the well-planned traffic infrastructures. For such traffic safety systems, foreign countries follow the current tendency to which they manage the traffic facilities and equipments based on the objective assessment for the state of every traffic safety facility in terms of Asset Management(AM). As the road safety facilities related among them are very diverse, and their functions are very important as well, the regulations and directions for installing them are enacted. However, despite the standards and directions for the installations, sometimes, the facilities are not installed in accordance with the standards, not only causing inconvenience to the users but also negatively affecting the safety for them. In the study, for the facilities in which the installation interval and height are standardized according to the designed speed and geometrical structure of the road among the various road safety facilities, the image analysis model capable of measuring them with a line scanning camera was developed. In addition, the program systematically analyzing this was also developed and applied to the field and, as the result of that, the size and installation interval of the facilities could be measured fast and accurately.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.6
• /
• pp.131-142
• /
• 2007

The road user cost in indirect costs as well as direct costs such as the inspection/ diagnosis cost and the repair/reinforcement cost should be considered as one of the important items in the life-cycle cost-effective design and maintenance of the bridges. To estimate the road user cost, this paper formulates the road user cost as a sum of the user delay cost and the vehicle operating cost considering the detour effect. A numerical traffic simulation and a regression analysis are performed to develop a regression model due to a time delay. The proposed regression model is applied to the generation of the maintenance strategy based on the life-cycle cost and performance, and its effectiveness and applicability is investigated. The road user cost has a great influence on establishing the maintenance strategy, and the proposed regression model could be successfully utilized to estimate the road user cost of a bridge.