• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.199-204
• /
• 2000

In this paper, we study single-user receiver, which applicable to DS-CDMA downlink. DS-CDMA downlink mainly use wallsh code, its orthogonality may be lost by the multiple access interference(MAI) caused by the multipath channel. In this paper, we use linear channel equalizer to eliminate the interference due to multipath channel and then to recover orthogonalit and use code-matched filter to detect transmitted data. Unlike existing research, which mainly assumed ideal channel information, we use pilot channel to estimate the channel coefficients. Especially we use guard symbols which are inserted periodically to estimate channel coefficients exactly without interference from user signal, and we accept an approximately ideal. The results show that improvement can be achieved using proposed detectors compared with that of that conventional RAKE receiver, especially when the user population is high we accepts excellent performance improvement.

• The Korean Journal of Nuclear Medicine
• /
• v.39 no.6
• /
• pp.413-420
• /
• 2005

Purpose: Neuroreceptor PET studies require 60-120 minutes to complete and head motion of the subject during the PET scan increases the uncertainty in measured activity. In this study, we investigated the effects of the data-driven head mutton correction on the evaluation of endogenous dopamine release (DAR) in the striatum during the motor task which might have caused significant head motion artifact. Materials and Methods: $[^{11}C]raclopride$ PET scans on 4 normal volunteers acquired with bolus plus constant infusion protocol were retrospectively analyzed. Following the 50 min resting period, the participants played a video game with a monetary reward for 40 min. Dynamic frames acquired during the equilibrium condition (pre-task: 30-50 min, task: 70-90 min, post-task: 110-120 min) were realigned to the first frame in pre-task condition. Intra-condition registrations between the frames were performed, and average image for each condition was created and registered to the pre-task image (inter-condition registration). Pre-task PET image was then co-registered to own MRI of each participant and transformation parameters were reapplied to the others. Volumes of interest (VOI) for dorsal putamen (PU) and caudate (CA), ventral striatum (VS), and cerebellum were defined on the MRI. Binding potential (BP) was measured and DAR was calculated as the percent change of BP during and after the task. SPM analyses on the BP parametric images were also performed to explore the regional difference in the effects of head motion on BP and DAR estimation. Results: Changes in position and orientation of the striatum during the PET scans were observed before the head motion correction. BP values at pre-task condition were not changed significantly after the intra-condition registration. However, the BP values during and after the task and DAR were significantly changed after the correction. SPM analysis also showed that the extent and significance of the BP differences were significantly changed by the head motion correction and such changes were prominent in periphery of the striatum. Conclusion: The results suggest that misalignment of MRI-based VOI and the striatum in PET images and incorrect DAR estimation due to the head motion during the PET activation study were significant, but could be remedied by the data-driven head motion correction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.520-525
• /
• 2019

Mines are an important infrastructure for securing resources, but safety problems can arise in the course of operation. Recently, the mining process is very complicated due to the large scale and mechanization. Therefore, it is necessary to construct accurate geospatial information on mine for systematic and safe mine operation. The geospatial information construction using the existing total station has a disadvantage that a lot of work time is required because the target must be collimated and measured. In this study, the data of the mines were acquired with the total station and the 3D laser scanner, and the mine spatial information was constructed by using the shape based registration method. By using the static scanner data of some area applying the reference point surveying result of the total station, it was possible to construct the accurate result on the wide area acquired by the mobile scanner effectively. Also, the accuracy of the constructed geospatial information was evaluated and the deviation of mean 0.083m was shown. Point cloud products constructed through the research can contribute to the efficiency improvement of mine management by enabling quantitative analysis such as visualization of mine shape, distance, area and slope, and automation of drawing creation for cross section shape.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.10b
• /
• pp.1163-1166
• /
• 2001

최근의 네트워크는 유선에서 무선으로 발전하고 있다. 무선 네트워크 기술은 여러 가지가 있다. 그 중 좁은 영역에서 사용하고 개인적인 용도로 알맞은 것이 블루투스(Bluetooth)이다. 블루투스 기술 표준은 데이터를 전송하는 단순한 통신 방법만을 정의한 것이 아니라, 몇 가지 응용에 대한 표준도 정의되어 있다. 이 응용은 모든 블루투스 기기가 전부 구현해야 하는 것이 아니라, 그 중 기기에 알맞은 것만을 선택해서 구현을 할 수 있도록 되어 있다. 그렇다면 블루투스 기기에서 다른 기기가 제공하는 서비스가 무엇인지를 알아낼 수 있는 방법이 필요하게 된다. 다른 기기의 서비스를 알아내는데 사용되는 블루투스 기술이 SDP 계층 (Service Discovery Protocol Layer) 이다. SDP 계층은 프로토콜만으로 작동 가능한 것이 아니라, 블루투스 기기에서 제공 가능한 서비스와 서비스 속성을 정의한 내부 데이터베이스를 참조해서 작동하게 된다. 이 내부 데이터베이스는 블루투스를 구현하는 사람마다 모두 다르게 구현하고 있다. 그래서 블루투스 서비스와 서비스 속성에 관한 정보는 글과 간단한 도표로만 정의되고 있는 상황이다. 블루투스 서비스와 서비스 속성 정보를 글과 도표가 아닌 XML을 이용한 문서로 표현을 하는 방법이 나타났었다. 그러나 블루투스 기기에서 직접 서비스와 서비스 속성을 기술한 XML 문서를 바탕으로 SDP를 작동시키는 것은 블루투스 기기에 XML 파서를 포함시켜야 한다는 것을 말한다. 대체로 작은 CPU 성능과 적은 메모리를 가지고 있는 블루투스 기기에서는 XML 파서를 포함하는 근 부담이 된다. 이에 본 논문에서는 보편적으로 사용될 수 있는 블루투스 서비스와 서비스 속성을 기술한 XML 문서에서 블루투스 기기에 적합한 내부 정보를 생성하는 생성기를 설계하고 구현을 하였다.보다는 현저히 낮았다. 총 휘발성 유기화합물읜 농도는 실내가 실외 보다 높았다(I/O ratio 2.5). BTEX의 상대적 함량도 실내가 실외보다 높아 실내에도 발생원이 있음을 암시하고 있다. 자료 분석결과 유치원 실내의 벤젠은 실외로부터 유입되고 있었고, 톨루엔, 에틸벤젠, 크실렌은 실외뿐 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타나며 그 유의성이 움직임 보정 전에 비하여 낮음을 알 수 있었다. 결론: 뇌활성화 과제 수행시에 동반되는 피험자의 머리 움직임에 의하여 도파민 유리가 과대평가되었으며 이는 이 연구에서 제안한 영상정합을 이용한 움직임 보정기법에 의해서 개선되었다. 답이 없는 문제, 문제 만들기, 일반화가 가능한 문제 등으로 보고, 수학적 창의성 중 특히 확산적 사

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.83-89
• /
• 2018

The thermal characteristics of concrete specimens were analyzed using cement paste specimens with artificial cracks. In order to understand the temperature characteristics of the specimen depending on the crack depth, the specimen was heated and the minimum temperatures of the specimens at which cracks appear were investigated according to the crack depth. It was confirmed that the surface temperature distribution of the specimen varies depending on whether the specimen is cracked or not, because of the single and multiple reflections of the incident energy. Furthermore, as the temperature distribution of the specimen reaches a steady state, the temperature data tends to decrease with the crack depth. Through the observation of the normalized temperatures, it was found that the temperature of the specimens obtained from this experiment reached a steady state after 10 minutes. At this time, the standard deviation of the normalized temperature is around 0.01 or less, and the temperature decreases linearly with increasing crack depth. This result is considered to be closely related to the area where multiple reflections occur in the cracked region. If the correlation between the crack region and the incident energy is analyzed for various specimens, it can be applied to the diffuse reflection of the light.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.3-11
• /
• 2014

Recently, rapid urbanization has necessitated continuous updates in digital map to provide the latest and accurate information for users. However, conventional aerial photogrammetry has some restrictions on periodic updates of small areas due to high cost, and as-built drawing also brings some problems with maintaining quality. Alternatively, this paper proposes a scheme for efficient and accurate update of digital map using point cloud data acquired by Terrestrial Laser Scanner (TLS). Initially, from the whole point cloud data, the building sides are extracted and projected onto a 2D image to trace out the 2D building footprints. In order to register the footprint extractions on the digital map, 2D Affine model is used. For Affine parameter estimation, the centroids of each footprint groups are randomly chosen and matched by means of a modified RANSAC algorithm. Based on proposed algorithm, the experimental results showed that it is possible to renew digital map using building footprint extracted from TLS data.

• The KIPS Transactions:PartB
• /
• v.13B no.4 s.107
• /
• pp.479-488
• /
• 2006

The iconic language interlace is designed to provide more convenient environments for communication to the target system than the keyboard-based interface. For this work, tendencies and features of vocabulary are analyzed in conversation corpora constructed from the corresponding domains with high degree of utilization, and the meaning and vocabulary system of iconic language are constructed through application of natural language processing methodologies such as morphological, syntactic and semantic analyses. The part of speech and grammatical rules of iconic language are defined in order to make the situation corresponding the icon to the vocabulary and meaning of the Korean language and to communicate through icon sequence. For linguistic ambiguity resolution which may occur in the iconic language and for effective semantic processing, semantic data focused on situation of the iconic language are constructed from the general purpose Korean semantic dictionary and subcategorization dictionary. Based on them, the Korean language generation from the iconic interface in semantic domain is suggested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5169-5175
• /
• 2013

We present a framework for 3D hand gesture design and modeling. We adapted two different pattern matching techniques, Dynamic Time Warping (DTW) and Hidden Markov Models (HMMs), to support the registration and evaluation of 3D hand gestures as well as their recognition. One key ingredient of our framework is a concept for the convenient gesture design and registration using HMMs. DTW is used to recognize hand gestures with a limited training data, and evaluate how the performed gesture is similar to its template gesture. We facilitate the use of visual sensors and body sensors for capturing both locative and inertial gesture information. In our experimental evaluation, we designed 18 example hand gestures and analyzed the performance of recognition methods and gesture features under various conditions. We discuss the variability between users in gesture performance.

• The Journal of Information Technology
• /
• v.3 no.2
• /
• pp.39-47
• /
• 2000

Among the compression methods of moving picture information, a motion estimation method is used to remove time-repeating. The Block Matching Algorithm in motion estimation methods is the commonest one. In recent days, it is required the more advanced high quality in many image processing fields, for example HDTV, etc. Therefore, we have to accomplish not by means of Partial Search Algorithm, but by means of Full Search Algorithm in Block Matching Algorithm. In this paper, it is suggested a structure that reduce total calculation quantity and size, because the structure using Bit Plane select and use only 3bit of 8bit luminance signal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1793-1801
• /
• 1994

In this paper, a new method for predicting the 1 dB gain compression point of cascaded N amplifiers is proposed. With the proposed method, the transfer function of each amplifier is derived from scalar data available from the manufacturers data sheet and all transfer functions are producted with scalar in order to also derive the overall transfer function of the subsystem under the assumption that the input and output port of each amplifier are matched. Therefore, the 1 dB gain compression point of the subsystem can be predicted or estimated, reversely, utilizing the overall transfer function obtained with the proposed method. The proposed method can be used irrespective of the number of scalar data but, in this paper, it is analyzed only with two scalar data (linear power gain and 1 dB gain compression point) and three scalar data(linear power gain, 1 dB and 0.5 dB gain compression points). With two sample amplifiers operated in Ku-band, the predicted results by the proposed and previous method, respectively, and the experimental results are together presented in order to confirm its utility.