• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1676-1686
• /
• 2021

In this paper, we propose a general cross-chain solution based on the idea of modularity, abstraction, and layering, which decoupling the cross-chain function from the consensus algorithm and specific application logic, and utilize a Merkle proof to ensure the validity and legality of cross-chain operations. Since the underlying implementations of homogeneous and heterogeneous blockchains are different, we treat them separately. For homogeneous blockchains, we suggest a TCP-like cross-chain transport protocol (CCTP). While for heterogeneous blockchains, we present a method to construct the relay chain to realize the cross-chain function. The proposed scheme can enable the correct, effective, reliable, orderly, and timely transmission of cross-chain data. However, the essential difference between the operations within a single blockchain and the interoperability between different blockchains is that the trust domain is different. Cross-chain interoperation itself breaks the completeness of the blockchain, therefore, some efficiency and safety must sacrifice to trade-off.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.8
• /
• pp.59-64
• /
• 2009

This paper is intended to study how well the routing protocol supplied in wireless mesh networks can evade interference path along the applied routing metric. Wireless mesh networks, unlike existing network techniques, has the characteristics that node movement is less and energy effect is limited. Therefore. this type of network requires path configuring technique to reflect such network characteristics and new routing metric to determine proper path. Routing metric proposed recently is designed to produce link quality accurately, but it configures path not considering the traffic situation of adjacent nodes. Thus. this technique has the problems of reduced transfer rate and delay between terminals occurring due to frequent traffic chaos by the interference of adjacent nodes. Therefore, this paper proposes metric that configures routing path by finding like metric that can transfer data effectively by considering the traffic situation of adjacent nodes. We confirmed through simulation that the proposed routing metric reduces the delay between terminals via the path that evades the traffic interference of adjacent node.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.264-264
• /
• 2017

국외의 상수도 원격검침 시스템 내 데이터 전송방식은 도시 규모, 계량기의 밀도, 전력공급 여부 및 통신망의 설치 여부 등을 종합적으로 고려하여 결정되었다. 대부분의 스마트워터미터 제조업체들은 계량기의 부호기가 공급하는 판독 내용(데이터)을 전송할 검침단말기와 근거리 통신망(neighborhood area network)을 연계하여 개발 및 판매하였으며, 자체 소유 통신 프로토콜을 사용하여 라디오 주파수(RF) 통신 기술을 사용하고 있다. 광역통신망(wide area network)의 경우, 노드(말단의 계량기 및 센서)들과 이에 연결된 통신망 들을 포함한 네트웍의 배열이나 구성이 스타(star), 메쉬(mesh), 버스(bus), 나무(tree) 등의 형태로 통신망이 구성되어 있으나, 스타와 메쉬형 통신망 구성형태가 가장 널리 활용되는 것으로 조사되었다. 시스템 통합운영관리 업체들인 IBM, Oracle, Itron 등은 용수 인프라 관리 또는 통합네트워크 솔루션 등의 통합 물관리 시스템(integrated water management system)을 개발하여 현장적용을 하고 있으며, 원격검침 시스템을 통해 고객들의 현재 소비량과 과거 누적 소비량, 누수 감지 서비스 및 실시간 요금 고지 등을 실시간으로 웹 포털과 앱을 통해 제공하고 있다. 또한, 일부 제조업체들은 도시 용수공급/소비 관리자가 주민의 용수사용량을 모니터링하여 일평균 용수사용량 및 사용 경향을 파악하고, 누수를 검지하여 복구 및 용수 사용 지속가능성 지수를 제시하고, 실시간으로 주민의 용수사용량 관련 데이터를 모니터링하여 용수공급의 최적화를 위한 의사결정지원 서비스를 용수공급자에게 제공하고 있다. 최근에는 인공지능을 활용해 가정용수의 용도별(세탁용수, 화장실용수, 샤워용수, 식기세척용수 등) 사용량 곡선을 패터닝하여 profiling 기법을 도입해, 스마트워터미터에서 용수사용량이 통합되어 검지될 시 용수사용량의 세부 용도별 re-profiling 기법을 도입하여 가정용수내 과소비되는 지점을 도출 후 절감을 유도하는 기술이 개발 중이다. 또한, 미래 용수 사용량 예측을 위해 다양한 시계열 자료를 분석하는 선형 종속 모형(자기회귀모형, 자기회귀이동평균모형, 자기회귀적분이동평균모형 등)과 비선형 종속 모형(Fuzzy Logic, Neural Network, Genetic Algorithm 등)을 활용한 예측기능이 구축되어 상호 비교하여 최적의 용수사용량 예측 도구를 제공되고 있다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.5
• /
• pp.451-457
• /
• 2016

To improve security in the data communication field, many studies on the application of chaotic signals to encryption have been conducted in recent years. In this study, a new security protocol where the initial value sensitivity and noise similarity of chaotic signals have been applied to an RFID communication channel was designed. In the case of chaotic systems, if the initial values become identical, the same signals are generated at the same time after that point even though the two systems have been calculated independently. Therefore, an unpredictable security channel can be produced based on such characteristics. However, a security channel can be produced only when an initial value is shared in advance, and thus there is a potential problem of infringement during the transmission of the initial value. To resolve this problem, a method in which a certain proportion of new chaotic signals are applied to two chaotic systems for communication and are then synchronized after some time was proposed. This new method can conceal the initial value, and thus can resolve the problem of the existing communication method using chaotic signals. The designed method was verified with the encryption and decryption of images. It is expected that a more secure RFID system could be established by applying the communication protocol proposed in this study to insecure RFID communication channels.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.27 no.1
• /
• pp.1-6
• /
• 2017

Recent researches on radio frequency energy harvesting networks(RF-EHNs) with limited energy resource like battery have been focusing on the development of a new scheme that can effectively extend the whole lifetime of a network to semipermanent. In order for considerable increase both in the amount of energy obtained from radio frequency energy harvesting and its charging effectiveness, it is very important to design a network that supports energy harvesting and data transfer simultaneously with the full consideration of various characteristics affecting the performance of a RF-EHN. In this paper, we proposes an interference-based charging aware routing protocol(ICARP) that utilizes interference information and charging time to maximize the amount of energy harvesting and to minimize the end-to-end delay from a source to the given destination node. To accomplish the research objectives, this paper gives a design of ICARP adopting new network metrics such as interference information and charging time to minimize end-to-end delay in energy harvesting wireless networks. The proposed method enables a RF-EHN to reduce the number of packet losses and retransmissions significantly for better energy consumption. Finally, simulation results show that the network performance in the aspects of packet transmission rate and end-to-end delay has enhanced with the comparison of existing routing protocols.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.18-25
• /
• 2020

With the development of water internet technology, data communication between objects is expanding. Research related to data communication technology between vehicles that incorporates related technologies into vehicles has been actively conducted. For data communication between mobile terminals, data stability, reliability, and real-time performance must be guaranteed. The 5 GHz Wi-Fi band, which is advantageous in bandwidth, communications speed, and wireless saturation of the wireless network, was selected as the data communications network between vehicles. This study analyzes how to design and implement a 5 GHz Wi-Fi network in a vehicle network. Considering the characteristics of the mobile communication terminal device, a continuous variable communications structure is proposed to enable high-speed data switching. We simplify the access point access procedure to reduce the latency between wireless terminals. By limiting the Transmission Control Protocol Internet Protocol (TCP/IP)-based Dynamic Host Configuration Protocol (DHCP) server function and implementing it in a broadcast transmission protocol method, communication delay between terminal devices is improved. Compared to the general commercial Wi-Fi communication method, the connection operation and response speed have been improved by five seconds or more. Utilizing this method can be applied to various types of event data communication between vehicles. It can also be extended to wireless data-based intelligent road networks and systems for autonomous driving.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.3
• /
• pp.239-246
• /
• 2013

The IEEE 802.15.4 offers standard about PHY and MAC layer and features low power, low bandwidth, and low speed data communication. Because of this reason, IEEE 802.15.4 is only within a limited range such as sensor detection and home network; nevertheless, the research about transmission multimedia data like voice packet through wireless sensor networks is conducted widely. In this paper, we proposed the group communication system based on the sensor network. TDMA/TDD MAC based on the IEEE 802.15.4 PHY for voice communication on the sensor network is designed by improvement existing peer-to-peer voice communication on the sensor network and hardware is implemented for group communication. To measure the quality of designed system, mean opinion score (MOS) is obtained from the experiment and verified by using sine wave method. As a result of an experiment, we expect that a many cases of application solution can be developed using presented system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1431-1439
• /
• 2016

In this paper, we propose a new location service and location-based routing for data dissemination from a source to a mobile group sink in less energy consumption of the sensor node. Unlike the existing protocols, the proposed protocol uses a leader sink instead of a group area as the location information to represent a mobile sink group. The proposed protocol also uses grid leaders on virtual grid structure to support sink mobility in location service. By using a leader sink as a representative and grid leaders for mobility supporting, the proposed protocol can exploit an efficient hierarchical location service and data dissemination method without using flooding. Accordingly, the proposed protocol carries out upper layer location services and data dissemination between a leader sink and a source and lower layer location services and data dissemination between the leader sink and member sinks. Simulation results demonstrate that the proposed protocol achieves energy-efficiency.

• The KIPS Transactions:PartC
• /
• v.12C no.5 s.101
• /
• pp.617-622
• /
• 2005

Lately, the MANET research has focused on providing routing services with security and previous schemes have been proposed for detecting malicious nodes in a MANET. However, they still include some problems which malicious nodes cannot be found when they falsely report other nodes as malicious. Accordingly, we propose a novel and efficient scheme for detecting malicious nodes using report messages and a report table which is consisted of node ID both for suspecting and reporting when the malicious nodes behave normally during the route discovery, but the other hand they drop and modify packets, or falsely report other nodes as malicious during the data transmission. Our proposed scheme is applicable to not only DSR but aiso AODV. And we provide some simulation results of our proposed scheme by comparing general AODV with our proposed scheme. Simulation results show that our Proposed scheme outperforms general AODV in terms of average packet loss ratio and packet delivery ratio.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.2
• /
• pp.339-346
• /
• 2013

As the need for security of SCADA systems is increasing, significant progress has been made in research on security of control protocol. However, very few security solutions were adapted to legacy SCADA system. The reasons for non-adoption are latency, cost and key management problem. We propose a low latency, economic security Solution to solve these issues. The proposed solution performs security function in data link layer and has minimum overhead to minimize latency. Furthermore, we try to solve the key management problem by providing systematic security keys and key distribution method.