• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.8-13
• /
• 2016

A buoy is a float attached by chain to the seabed to mark channels in a harbor or underwater hazards and can be classified into two major types as autonomous buoys and fixed buoys. When there is high demand such as marking channels in a harbor, monitoring ecology of ocean and environmental monitoring of coastal areas, smart buoys are developed. The smart buoys have wireless network systems such as GPS, CDMA and ZigBee. Using the GPS techniques, location and environments of buoy can be monitored and traced. However, the GPS in fixed buoy systems has a high power consumption and cost. Using many buoys on low power ZigBee basis allows dramatic reduction of the overall power consumption. In this study, it is aimed at the design of the trackable protocol for a buoy system which has low data rate and low power consumption. The proposed protocol has advantages that it can detect abnormal movement and gather trackable information without any system changes. In the introduced protocol, additional 2 bits and join request messages are used for trackable buoy system. The behaviors of improved protocol is modeled into petri-net and proved a reachability.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.2
• /
• pp.162-167
• /
• 2009

In this paper, we present a patient real-time vital sign information transmission system to effectively support developing real-time communication service by using a real-time object model named TMO (Time-Triggered Message-Triggered Object). Also, we describes the application environment as the PMS(Patient Monitoing System) to guarantee real-time service message with TMO structure in distributed network systems. We have to design to obtain useful vital sign information, which is generated at parsing data receiver modulor of HIS with TMO structure, that is offered by the central monitor of PMS. Vital sign informations of central monitor is composed of the raw data of several bedsite patient monitors. We are willing to maintain vital sign information of real time and continuity that is generated from the bedsite patient monitor. In the real time simulation techniques based on TMO object modeling, we have observed several advantages to the TMO structuring scheme. TMO object modeling has a strong traceability between requirement specification and design.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.1
• /
• pp.29-33
• /
• 2020

Despite the same system architecture and operation principle, Advanced Metering Infrastructure (AMI) and Internet of Things (IoT) are recognized as a heterogeneous system. This is due to the different object modeling and communication protocols used in smart meters and sensors. However, data interworking between AMI and IoT is expected to be inevitable in the future. In this paper, we propose Device Language Message Specification (DLMS) to Lightweight Machine to Machine (LwM2M) conversion model. The proposed interworking model can reduce the packet size by 46.5% compared to that of the encapsulation method.

• The KIPS Transactions:PartC
• /
• v.13C no.1 s.104
• /
• pp.103-112
• /
• 2006

Since sensor node has a limited energy supply in a wireless sensor network, it is very important to maximize the network lifetime through energy-efficient routing. Thus, many routing protocols have been developed for wireless sensor networks and can be classified into flat and hierarchical routing protocols. Recent researches focus on hierarchical routing scheme and LEACH is a representative hierarchical routing protocol. In this paper, we investigated the problems of the LEACH and proposed a novel energy efficient routing scheme, called ENTER(ENergy efficient Two-tiEr Routing protocol), to resolve the problem. ENTER reduces an energy consumption and increases a network lifetime by organizing clusters by the same distributed algerian as in the LEACH and establishing paths among cluster-heads to transmit the aggregated data to the sink node. We compared the performance of the ENTER with the LEACH through simulation and showed that the ENTER could enhance the network lifetime by utilizing the resources more efficiently.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.1
• /
• pp.74-87
• /
• 2000

PVM (parallel virtual machine) provides a programming environment that allows a collection of networked workstations to appear as a single parallel computational resource. The performance of parallel applications in this environment depends on the performance of data transfers between tasks. In this paper, we present a new Myrinet-based communication model of PVM that improves PVM communication performance over a high-speed Myrinet LAN. The proposed PVM communication model adopts a communication mechanism that allows any user-level process to directly access the network interface board without going through UDP/IP protocol stacks in the kernel. This mechanism provides faster data transfers between PVM tasks over the Myrinet since it avoids data copy overhead from kernel (user space) to user space (kernel) and reduces communication latency due to network protocol software layers. We implemented EPVM (Enhanced PVM), our updated version of the traditional PVM using UDP/IP, that is based on the proposed communication model over the Myrinet. Performance results show EPVM achieves communication speed-up of one to two over the traditional PVM.

• Journal of Digital Contents Society
• /
• v.18 no.5
• /
• pp.895-904
• /
• 2017

In this paper, we propose an IoT based smart outlet system for one-person household with electric safety, electric energy consumption management and transmission of messages to the reserved contacts by connecting the emergency network. The proposed smart outlet system is implemented by parsing packet data and protocol between server, module, application and WiFi AP receiver. The WiFi AP built for communication can be used not only for the outlet but also for the gas barrier, the door lock and the like. In addition, the proposed method can provide the remote monitoring function by receiving the amount of power of the receptacle received through the AC current sensor (SCT-013) in real time. The smart outlet system is expected to be capable of automatically shutting off the power in case of emergency through automatic power use analysis in addition to the standby power cutoff function.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.131-137
• /
• 2007

Recently, Ant Colony Optimization (ACO) is emerged as a simple yet powerful optimization algorithm for routing and load-balancing of both wired and wireless networks. However, there are few researches trying to adopt ACO to enhance routing performance in WSN owing to difficulties in applying ACO to WSN because of stagnation effect. In this paper, we propose an energy-efficient path selection algorithm based on ACO for WSN. The algorithm is not by simply applying ACO to routing algorithm but by introducing a mechanism to alleviate the influence of stagnation. By the simulation result, the proposed algorithm shows better performance in data propagation delay and energy efficiency over Directed Diffusion which is one of the outstanding schemes in multi-hop flat routing protocols for WSN. Moreover, we checked that the proposed algorithm is able to mitigate stagnation effect than simple ACO adoption to WSN.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.1A
• /
• pp.67-73
• /
• 2008

Our research is aimed at developing an architectural frame-work of USN sensor network discovery service systems. The research is fo-cused on the four areas a survey of USN technology, development of a USN software model, development of the design space of the USN sensor network discovery service, and finally the architectural framework of the USN sensor network dicovery service. The survey of the USN technology is conducted on four technological visions that contain USN system technology, USN networking technology, and USN middleware along with the service platform, With respect to each technological division, domestic and worldwide leading research projects are primarily explored with their technical features and research projects are primarily explored with their technical features and research output To provide a means to analyze sensor network discovery services, we devel-oped the design space of the sensor network discovery services by exploring the scalability with respect to query scope, lookup performance, and resolution network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.10
• /
• pp.977-985
• /
• 2012

Recently, many countries have been developing new protocols to improve the performance of tactical ad hoc networks for implementing NCW (Network Centric Warfare). Combat net radio (CNR) networks are the most important communication infra for the ground forces such as infantry of Army. U.S. Army had developed MIL-STD-188-220D that is the Interoperability Standard for DMTDs (Digital Messages Transfer Device Subsystems) for voice and data communication in CNR. MIL-STD-188-220D is a candidate for MAC protocol of TMMR which is next radio and has a few constraints to used in TMMR. NAD (Network Access Delay) defined in MIL-STD-188-220D needs time synchronization to avoid collision. However, it is difficult for time synchronization to fit in multi-hop environment. We suggest the enhanced DAP (Deterministic Adaptable Priority)-NAD to prevent conflicts and decrease delays in multi-hop CNR. Simulation results show that the proposed scheme improves the performance in multi-hop CNR networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.683-688
• /
• 2011

Current is change to concept that management traffic of ship os magnified gradually to near shore waters from harbor. Therefore, introducing the technology of AIS in the ground station, lighthouse, bouy, sea facilities etc.. that is support equipment for safety sailing of ship and safety security of harbor and ship administration. The operation and maintenance of AIS for aids to navigation are required to efficient method. With this actuality, sea advanced nation of EU, USA, Japan that has been apply for developing AtoN AIS equipment that is connected equipment of technology standard in IALA. Because of it is expected to depend equipment in income, that is required to domestic technology of the AtoN AIS. This paper is targeted to development that is suitable automation AtoN AIS equipment in environmental peculiarity for constructor AtoN operating administration center. It has been realization send protocol for information interchange.