• Fire Science and Engineering
• /
• v.18 no.2
• /
• pp.57-67
• /
• 2004

The results of the risk assessing on general buses, consisting mainly of diesel-fueled buses, show that the frequency of the instantaneous release is 1.4${\times}$10$^{-3}$ /bus/year, from which the probability of the formation of fireball as a sub event becomes 1.7${\times}$104, and show that the leakage from the CNG-fueled buses is 0.002 event/year. Also, the frequency of gradual release due to a crack is estimated at 3.7${\times}$10$^{-3}$ /buses/year, and a subsequent probability at which this could lead to a jet flame as a sub event is 1.2${\times}$10$^{-3}$ This corresponds to 0.04event/year for the CNG-fueled buses. Dividing all the fired casualties by the running distance of diesel-fueled buses, the risk is 0.091 fire fatalities per 100-million miles. And the total fire risk fur CNG buses is approximately 0.17 per 100-million miles of travel. This means that CNG buses is twice or more dangerous than diesel buses. After all CNG buses are more susceptible to the major fires. In the aspect of the reliability of this study, generic models and the failure data used in assessing the risks of CNG buses are appropriate. However, more accurate physics-based models and databases should be supplemented with this study to provide the better results.

• Journal of the Korean Society for Library and Information Science
• /
• v.49 no.4
• /
• pp.125-157
• /
• 2015

In Korean Studies, there have been made many studies for finding the identity as the intrinsic academic field, because the Korean studies have complex intertwined characteristics with other fields. However, previous related studies have been mostly focused on the qualitative content analysis method related to the major Korean Studies, the study applying the bibliometric method was not conducted. Therefore, the purpose of this study is to draw intellectual structures about the domestic and overseas Korean studies academic papers applying the bibliometric methods, and to analyze content of intellectual structures by focus group interview (FGI). As the result of this study, the intellectual structure in the domestic Korean Studies had the characteristics of the Humanities, and the intellectual structure in the foreign Korean Studies had the characteristics of the Social Sciences. Also, the domestic Korean Studies encompassed a wide range of period from ancient to modern times, while the foreign Korean Studies focused on a modern and contemporary times. This study has a significance in the way that it is the first study to draw the intellectual structures in the domestic and foreign Korean Studies applying the bibliometric method, and then to carry out the comprehensive analysis through FGI with specialists in Korean Studies. However, in order to do more meaningful one-to-one comparison studies about the field of the domestic and foreign Korean Studies, many follow-up co-studies reflecting diverse opinions of many researchers in Korean Studies will be necessary.

• Journal of the Korean Society for Library and Information Science
• /
• v.49 no.3
• /
• pp.457-488
• /
• 2015

In this study, we analyzed the current research state of Library and Information science in top 20 journals from 1990 to 2015, in subject and method perspectives. We developed weighted subject-method network to investigate on centralities of a subject and a method as well as their relations. This network is composed of subject nodes and method nodes and gives a weight on each node by topic occurrence. As a result, for 25 years, management information system, information need analysis, bibliometrics, information policy were top topics. Modeling, literature review, scientific research impact analysis, web data analysis were top methods. A recent rise of text mining is highlighted. We also analyzed communities made from the past 25 years and the recent 5 years. Bibliometrics is extending its field by applying various network analyzing algorithms. Text mining is specialized in medical information system and user interface. This result identifies the interests of excellent studies in Library and Information Science. It also can be fundamental resource for the development of Library and Information Science.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5227-5237
• /
• 2011

Technology roadmap is a powerful tool that considers relationships of technology, product and market and referred as a supporting technology strategy and planning. There are numerous studies that have attempted to develop technology roadmap and case studies on specific technology areas. However, a number of studies have been dependant on brainstorming and discussion of expert group, delphi technique as qualitative analysis rather than systemic and quantitative analysis. To overcome the limitation, patent analysis considered as quite quantitative analysis is employed in this paper. Therefore, this paper proposes new technology roadmapping based on patent citation network considering technology life cycle and suggests planning for undeveloped technology but considered as promising. At first, patent data and citation information are collected and patent citation network is developed on the basis of collected patent information. Secondly, we investigate a stage of technology in the life cycle by considering patent application year and the technology life cycle, and duration of technology development is estimated. In addition, subsequent technologies are grouped as nodes of a super-level technology to show the evolution of the technology for the period. Finally, a technology roadmap is drawn by linking these technology nodes in a technology layer and estimating the duration of development time. Based on technology roadmap, technology planning is conducted to identify undeveloped technology through text mining and this paper suggests characteristics of technology that needs to be developed in the future. In order to illustrate the process of the proposed approach, technology for hydrogen storage is selected in this paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2460-2470
• /
• 2009

In this study, the parameter extraction for evaluation of the anesthesia depth in each anesthesia stages was conducted. An object of the this experiment study has studied 5 adult patients (mean $\pm$ SD age:$42{\pm}9.13$), ASA classification I and II, undergoing surgery of obstetrics and gynecology. Anaesthesia was maintained with Enflurane. HRV signal was created by R-peak detection algorithm form ECG signal. The HRV data were preprocessing algorithm. It has tried find out the anesthesia parameter which responds the anesthesia events and shows objective anesthesia depth according to anesthesia stage including pre-anesthesia, induction, maintenance, awake and post-anesthesia. In this study, proposed algorithm to analysis the HRV(heart rate variability) signal using wavelet transform in anesthesia stage. Three sorts of wavelet functions applied to PSD. In the result, all of the results were showed similarly. But experiment results of Daubeches 10 is better. Therefore, this parameter is the best parameter in the evaluation of anesthesia stage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.574-579
• /
• 2008

The evaporation heat transfer coefficient of $CO_2$ (R-744) in a horizontal tube was investigated experimentally. The main components of the refrigerant loop are a receiver, a variable-speed pump, a mass flow meter, a pre-heater and evaporator (test section). The test section consists of a smooth, horizontal stainless steel tube of inner diameter of 4.57mm. The experiments were conducted at mass flux of 400 to $900kg/m^2s$, saturation temperature of 5 to $20^{\circ}C$, and heat flux of 10 to $40kW/m^2$. The test results showed the heat transfer of $CO_2$ has a greater effect on nucleate boiling more than convective boiling. Mass flux of $CO_2$ does not affect nucleate boiling too much. In comparison with test results and existing correlations, All of the existing correlations for the heat transfer coefficient underestimated the experimental data. However Jung et al.'s correlation showed a good agreement with the experimental data. Therefore, it is necessary to develope accurate predictions determining the evaporation heat transfer coefficient of $CO_2$ in horizontal tubes.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10b
• /
• pp.247-252
• /
• 2007

오늘날 컴퓨팅 환경은 점차 복잡해지고 있으며, 복잡한 환경을 관리하는 이 점차 중요해 지고 있다. 이러한 관리를 위해 어플리케이션의 내부 구조를 드러내지 않은 상태에서 환경에 적응하는 자가치유에 관한 연구가 중요한 이슈가 되고 있다. 우리의 이전 연구에서는 자가 적응 모듈의 성능 향상을 위해 스위치를 사용하여 컴포넌트의 동작 유무를 결정하였다. 그러나 바이러스와 같은 외부 상황에 의해 자가 적응 모듈이 정상적으로 동작하지 않을 수 있으며 다수의 파일을 전송할 때 스위치가 꺼진 컴포넌트들은 메모리와 같은 리소스를 낭비한다. 본 연구에서는 이전 연구인 성능 개선 자가 적응 모듈에서 발생할 수 있는 문제점을 해결하기 위한 방법을 제안한다. 1) 컴포넌트의 동작 여부를 결정하는 스위치를 확인하여 비정상 상태인 컴포넌트를 찾아 치유를 하고, 2) 현재 단계에서 사용하지 않는 컴포넌트를 다른 작업에서 재사용한다. 이러한 제안 방법론을 통해 파일 전송이 않은 상황에서도 전체 컴포넌트의 수를 줄일 수 있으며 자가 적응 제어 모듈을 안정적으로 작동할 수 있도록 한다. 본 논문에서는 명가를 위하여 비디오 회의 시스템 내의 파일 전송 모듈에 제안 방법론을 적용하여 이전 연구의 모듈과 제안 방법론을 적용한 모듈이 미리 정한 상황들에서 정상적으로 적응할 수 있는지를 비교한다. 또한 파일 전송이 많은 상황에서 제안 방법론을 적용하였을 때 이전 연구 방법론과의 컴포넌트 수를 비교한다. 이를 통해 이전 연구의 자가 적응 모듈의 비정상 상태를 찾아낼 수 있었고, 둘 이상의 파일 전송이 이루어 질 때 컴포넌트의 재사용을 통해 리소스의 사용을 줄일 수 있었다.위해 잡음과 그림자 영역을 제거한다. 잡음과 그림자 영역을 제거하면 구멍이 발생하거나 실루엣이 손상되는 문제가 발생한다. 손상된 정보는 근접한 픽셀이 유사하지 않을 때 낮은 비용을 할당하는 에너지 함수의 스무드(smooth) 항에 의해 에지 정보를 기반으로 채워진다. 결론적으로 제안된 방법은 스무드 항과 대략적으로 설정된 데이터 항으로 구성된 에너지 함수를 그래프 컷으로 전역적으로 최소화함으로써 더욱 정확하게 목적이 되는 영역을 추출할 수 있다.능적으로 우수한 기호성, 즉석에서 먹을 수 있는 간편성, 장기저장에 의한 식품 산패, 오염 및 변패 미생물의 생육 등이 발생하지 않는 우수한 생선가공, 저장방법, 저가 생선류의 부가가치 상승 등 여러 유익한 결과를 얻을 수 있는 효과적인 가공방법을 증명하였다.의 평균섭취량에도 미치지 못하는 매우 저조한 영양상태를 보여 경제력, 육체적 활동 및 건강상태 등이 매우 열악한 이들 집단에 대한 질 좋은 영양서비스의 제공이 국가적 차원에서 시급히 재고되어야 할 것이다. 연구대상자 특히 배달급식 대상자의 경우 모집의 어려움으로 인해 적은 수의 연구대상자의 결과를 보고한 것은 본 연구의 제한점이라 할 수 있다 따라서 본 연구결과를 바탕으로 좀 더 많은 대상자를 대상으로 한 조사 연구가 계속 이루어져 가정배달급식 프로그램의 개선을 위한 유용한 자료로 축적되어야 할 것이다.상범주로 회복함을 알수 있었고 실험결과 항암제 투여후 3 일째 피판 형성한 군에서 피판치유가 늦어진 것으로 관찰되어 인체에서 항암 투여후 수술시기는 인체면역계가 회복하는 시기를 3주이상 경과후 적어도 4주째 수술시기를 정하는 것이 유리하리라 생각되

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.685-695
• /
• 2016

This study suggests different improvement practices of adolescents' multicultural acceptability to compare the factors influencing multicultural acceptability with elementary and middle school students. The data used in this study come from the Korean Child and Youth Panel Study(KCYPS) of the National Youth Policy Institute(NYPI) comprising 4,092 responses from 5th grade elementary school students and 4th grade(middle school 2nd grade) of elementary school students. The study data were subjected to hierarchical regression analysis to give the following findings. First, Levels of Multicultural Acceptability were significantly different. Second, factors influencing multicultural acceptability for elementary school students and middle school students were different. Common factors were mother's education level, life's satisfaction, peer relationship, teacher relationship, and spirit of community. Factors for elementary school students's multicultural acceptability were subjective academic achievement, community awareness, experiences of cultural activity, and overseas visiting experiences. The factor for middle school students's multicultural acceptability was family/group travel experiences. Our findings highlight the importance of programs and education that are suitable for children's developmental level. Such peer group programs need to be offered for middle school students to achieve spirit of community and educational group program and various extracurricular activities to achieve community awareness and develop a spirit of community for elementary school students.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.647-654
• /
• 2016

In the defense industry, national security takes priority over economic sense and this has translated into high cost and long-term research and development. However, the exponential growth of technology and rapid changes in the security situation in recent years have resulted in a call for the development of systems at a low cost within a short period of time. In order to implement a modularization strategy in the field of defense, the introduction of line replaceable units in OO systems needs to be prioritized. This study selects six criteria following a literature review and prioritizes 11 modules for OO systems using the project evaluation method, Grey Relational Analysis (GRA). Based on the GRA results, the grey relational grades were derived as 0.83, 0.81 and 0.80 for the M11 (Main board), M8 (EMI module), M3 (Single board computer) modules, respectively. The cost and time of development is expected to be reduced in accordance with the grey relational grade. The results of this research could be utilized for decision making on adopting modularization in similar system development or product improvement programs (PIPs).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.724-731
• /
• 2016

As the structural damage caused by earthquakes has been gradually increasing, estimating the seismic fragility of structures has become essential for earthquake preparation. Seismic fragility curves are widely used as a probabilistic indicator of structural safety against earthquakes, and many researchers have made efforts to develop them in a more accurate and effective manner. However, most of the previous research studies used simplified 2D analytical models when deriving fragility curves, mainly to reduce the numerical simulation time; however, in many cases 2D models are inadequate to accurately evaluate the seismic behavior of a structure and its seismic vulnerability. Thus, this study provides a way to derive more accurate, but still effective, seismic fragility curves by using 3D analytical models. In this method, the reliability analysis software, FERUM, is integrated with the structural analysis software, ZEUS-NL, enabling the automatic exchange of data between these two software packages, and the first order reliability method (FORM), which is not a sampling-based method, is utilized to calculate the structural failure probabilities. These tools make it possible to conduct structural reliability analyses effectively even with 3D models. By using the proposed method, this study conducted a seismic vulnerability assessment of RC frame structures with their 3D analytical models.