• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.137-146
• /
• 2005

IP-based design methodology has been popularly employed for SoC design to reduce design complexity and to cope with time-to-market pressure. Interface modules for communication between system buses and IPs are required, since many IPs employ different protocols. Automatic generation of these interface modules would enhance designer's productivity and IP's reusability. This paper proposes an automatic interface generation system based on FSM generated from the protocol description of IPs. The proposed system provides the library modules for the standard buses to reduce the burdens of describing the protocols for data transfer from/to standard buses. Experimental results show that the area of the interface circuits generated by the proposed system had been increased slightly by 4.5% on the average when compared to manual designs. In the experiment, where bus clock is 100 Mhz and slave module clock is 34 Mhz, the latency of the interface had been increased by 7.1% in burst mode to transfer 16 data words. However, occupation of system bus can be reduce by 64.9%. A chip designer can generate an interface that improves the efficiency of system bus, by using this system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.1
• /
• pp.140-145
• /
• 2010

In this work, to theoretically analyze the nonlinear charging characteristic, a Radial Basis Function Neural Network (RBFNN) is adopted. Based on the RBFNN, an charging characteristic tendency of a Linear Type Magnetic Flux Pump (LTMFP) is analyzed. In the paper, we developed the LTMFP that generates stable and controllable charging current and also experimentally investigated its charging characteristic in the cryogenic system. From these experimental results, the charging current of the LTMFP was also found to be frequency dependent with nonlinear quality due to the nonlinear magnetic behaviour of superconducting Nb foil. On the whole, in the case of essentially cryogenic experiment, since cooling costs loomed large in the cryogenic environment, it is difficult to carry out various experiments. Consequentially, in this paper, we estimated the nonlinear characteristic of charging current as well as realized the intelligent model via the design of RBFNN based on the experimental data. In this paper, we view RBF neural networks as predominantly data driven constructs whose processing is based upon an effective usage of experimental data through a prudent process of Fuzzy C-Means clustering method. Also, the receptive fields of the proposed RBF neural network are formed by the FCM clustering.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.1-9
• /
• 2016

Railroad bridges account for 25% of the entire high-speed rail network. Railway bridges are subject to gradual structural degradation or fatigue accumulation due to consistent and repeating excitation by fast moving trains. Wireless sensing technology has opened up a new avenue for bridge health monitoring owing to its low-cost, high fidelity, and multiple sensing capability. On the other hand, measuring the transient response during train passage is quite challenging that the current wireless sensor system cannot be applied due to the intrinsic time delay of the sensor network. Therefore, this paper presents a framework for monitoring such transient responses with wireless sensing systems using 1) real-time excessive vibration monitoring through ultra-low-power MEMS accelerometers, and 2) post-event time synchronization scheme. The ultra-low power accelerometer continuously monitors the vibration and trigger network when excessive vibrations are detected. The entire network of wireless smart sensors starts sensing through triggering and the post-event time synchronization is conducted to compensate for the time error on the measured responses. The results of this study highlight the potential of detecting the impact load and triggering the entire network, as well as the effectiveness of the post-event time synchronized scheme for compensating for the time error. A numerical and experimental study was carried out to validate the proposed sensing hardware and time synchronization method.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.1
• /
• pp.123-133
• /
• 2018

Cyber-Physical System (CPS) is a system in which a physical system and a cyber system are strongly integrated. In order to operate the target physical system stably, the CPS constantly monitors the physical system through the sensor and performs control using the actuator according to the current state. If a malicious attacker performs a forgery attack on the measured values of the sensors in order to conceal their attacks, the cyber system operated based on the collected data can not recognize the current operation status of the physical system. This causes the delay of the response of the automation system and the operator, and then more damage will occur. To protect the CPS from increasingly sophisticated and targeted attacks, countermeasures must be developed that can detect stealthy deception attacks. However, in the CPS environment composed of various heterogeneous devices, the process of analyzing and demonstrating the vulnerability to actual field devices requires a lot of time. Therefore, in this study, we propose a method of constructing the experiment environment of the PLCitM (PLC in the middle) which can verify the performance of the techniques to detect the CPS stealthy deception attack and present the experimental results.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10b
• /
• pp.247-252
• /
• 2007

오늘날 컴퓨팅 환경은 점차 복잡해지고 있으며, 복잡한 환경을 관리하는 이 점차 중요해 지고 있다. 이러한 관리를 위해 어플리케이션의 내부 구조를 드러내지 않은 상태에서 환경에 적응하는 자가치유에 관한 연구가 중요한 이슈가 되고 있다. 우리의 이전 연구에서는 자가 적응 모듈의 성능 향상을 위해 스위치를 사용하여 컴포넌트의 동작 유무를 결정하였다. 그러나 바이러스와 같은 외부 상황에 의해 자가 적응 모듈이 정상적으로 동작하지 않을 수 있으며 다수의 파일을 전송할 때 스위치가 꺼진 컴포넌트들은 메모리와 같은 리소스를 낭비한다. 본 연구에서는 이전 연구인 성능 개선 자가 적응 모듈에서 발생할 수 있는 문제점을 해결하기 위한 방법을 제안한다. 1) 컴포넌트의 동작 여부를 결정하는 스위치를 확인하여 비정상 상태인 컴포넌트를 찾아 치유를 하고, 2) 현재 단계에서 사용하지 않는 컴포넌트를 다른 작업에서 재사용한다. 이러한 제안 방법론을 통해 파일 전송이 않은 상황에서도 전체 컴포넌트의 수를 줄일 수 있으며 자가 적응 제어 모듈을 안정적으로 작동할 수 있도록 한다. 본 논문에서는 명가를 위하여 비디오 회의 시스템 내의 파일 전송 모듈에 제안 방법론을 적용하여 이전 연구의 모듈과 제안 방법론을 적용한 모듈이 미리 정한 상황들에서 정상적으로 적응할 수 있는지를 비교한다. 또한 파일 전송이 많은 상황에서 제안 방법론을 적용하였을 때 이전 연구 방법론과의 컴포넌트 수를 비교한다. 이를 통해 이전 연구의 자가 적응 모듈의 비정상 상태를 찾아낼 수 있었고, 둘 이상의 파일 전송이 이루어 질 때 컴포넌트의 재사용을 통해 리소스의 사용을 줄일 수 있었다.위해 잡음과 그림자 영역을 제거한다. 잡음과 그림자 영역을 제거하면 구멍이 발생하거나 실루엣이 손상되는 문제가 발생한다. 손상된 정보는 근접한 픽셀이 유사하지 않을 때 낮은 비용을 할당하는 에너지 함수의 스무드(smooth) 항에 의해 에지 정보를 기반으로 채워진다. 결론적으로 제안된 방법은 스무드 항과 대략적으로 설정된 데이터 항으로 구성된 에너지 함수를 그래프 컷으로 전역적으로 최소화함으로써 더욱 정확하게 목적이 되는 영역을 추출할 수 있다.능적으로 우수한 기호성, 즉석에서 먹을 수 있는 간편성, 장기저장에 의한 식품 산패, 오염 및 변패 미생물의 생육 등이 발생하지 않는 우수한 생선가공, 저장방법, 저가 생선류의 부가가치 상승 등 여러 유익한 결과를 얻을 수 있는 효과적인 가공방법을 증명하였다.의 평균섭취량에도 미치지 못하는 매우 저조한 영양상태를 보여 경제력, 육체적 활동 및 건강상태 등이 매우 열악한 이들 집단에 대한 질 좋은 영양서비스의 제공이 국가적 차원에서 시급히 재고되어야 할 것이다. 연구대상자 특히 배달급식 대상자의 경우 모집의 어려움으로 인해 적은 수의 연구대상자의 결과를 보고한 것은 본 연구의 제한점이라 할 수 있다 따라서 본 연구결과를 바탕으로 좀 더 많은 대상자를 대상으로 한 조사 연구가 계속 이루어져 가정배달급식 프로그램의 개선을 위한 유용한 자료로 축적되어야 할 것이다.상범주로 회복함을 알수 있었고 실험결과 항암제 투여후 3 일째 피판 형성한 군에서 피판치유가 늦어진 것으로 관찰되어 인체에서 항암 투여후 수술시기는 인체면역계가 회복하는 시기를 3주이상 경과후 적어도 4주째 수술시기를 정하는 것이 유리하리라 생각되

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.8
• /
• pp.287-300
• /
• 2021

Collaborative Cyber-Physical Systems (CCPS) are those systems that contain tightly coupled physical and cyber components, massively interconnected subsystems, and collaborate to achieve a common goal. The safety of a single Cyber-Physical System (CPS) can be achieved by following the safety standards such as ISO 26262 and IEC 61508 or by applying hazard analysis techniques. However, due to the complex, highly interconnected, heterogeneous, and collaborative nature of CCPS, a fault in one CPS's components can trigger many other faults in other collaborating CPSs. Therefore, a safety assurance technique based on fault criticality analysis would require to ensure safety in CCPS. This paper presents a Fault Criticality Matrix (FCM) implemented in our tool called CPSTracer, which contains several data such as identified fault, fault criticality, safety guard, etc. The proposed FCM is based on composite hazard analysis and content-based relationships among the hazard analysis artifacts, and ensures that the safety guard controls the identified faults at design time; thus, we can effectively manage and control the fault at the design phase to ensure the safe development of CPSs. To justify our approach, we introduce a case study on the Platooning system (a collaborative CPS). We perform the criticality analysis of the Platooning system using FCM in our developed tool. After the detailed fault criticality analysis, we investigate the results to check the appropriateness and effectiveness with two research questions. Also, by performing simulation for the Platooning, we showed that the rate of collision of the Platooning system without using FCM was quite high as compared to the rate of collisions of the system after analyzing the fault criticality using FCM.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.370-376
• /
• 2022

Smart ships related studies are being conducted in various fields owing to the development of technology, and an engine room patrol robot that can patrol the unmanned engine room is one such study. A patrol robot moves around the engine room based on the information learned through artificial intelligence and checks the machine normality and occurrence of abnormalities such as water leakage, oil leakage, and fire. Study on engine room patrol robots is mainly conducted on machine detection using artificial intelligence, however study on movement and control is insufficient. This causes a problem in that even if a patrol robot detects an object, there is no way to move to the detected object. To secure maneuverability to quickly identify the presence of abnormality in the engine room, this study experimented with whether a patrol robot can determine the shortest path by applying the A* algorithm. Data were obtained by driving a small car equipped with LiDAR in the ship engine room and creating a map by mapping the obtained data with SLAM(Simultaneous Localization And Mapping). The starting point and arrival point of the patrol robot were set on the map, and the A* algorithm was applied to determine whether the shortest path from the starting point to the arrival point was found. Simulation confirmed that the shortest route was well searched while avoiding obstacles from the starting point to the arrival point on the map. Applying this to the engine room patrol robot is believed to help improve ship safety.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.24 no.4
• /
• pp.53-61
• /
• 2022

Growing agricultural products in greenhouses controlled by creating suitable climatic conditions and root zone of crop has been an important research and application subject. Appropriate environmental conditions in greenhouse are necessary for optimum plant growth improved crop yields. This study aimed to establish web-based remote monitoring system which monitors crops growth environment and status of crop on a real-time basis by applying to greenhouses IT technology connecting greenhouse equipment such as temperature sensors, soil sensors, crop sensors and camera. The measuring items were air temperature, relative humidity, solar radiation, CO₂ concentration, EC and pH of nutrient solution, medium temperature, EC of medium, water content of medium, leaf temperature, sap flow, stem diameter, fruit diameter, etc. The developed greenhouse monitoring system was composed of the network system, the data collecting device with sensors, and cameras. Remote monitoring system was implemented in a server/client environment. Information on greenhouse environment and crops is stored in a database. Items on growth and environment is extracted from stored information, could be compared and analyzed. So, A integrated monitoring system for smart greenhouse would be use in application practice and understanding the environment and crop growth for smart greenhouse management. sap flow, stem diameter and pant-water relations

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.4
• /
• pp.283-290
• /
• 2022

In this study, an IoT inspection system that can be linked with a server was developed using a gas timer and ESP-01 Wi-Fi module installed on a gas valve in the home. The server environment of the gas leak IoT inspection system was installed with APM (Apache, PHP, MySQL) to collect gas pressure data by generation so that leakage checks could be performed. In order to control the gas leak IoT inspection system, the app inventory was used to manage the gas leak check value in real time. In addition, user convenience has been enhanced so that membership management, WiFi settings, and leakage check values can be checked through mobile apps. In order to manage subscribers by region, the user list was checked by logging in in in the administrator mode so that the information on whether or not the leak test was conducted and the results could be provided. In addition, when the user presses the gas leak check button, the pressure is automatically checked, and the measured value is stored in the server, and when a gas leak occurs, the leakage check is performed after alarm and repair so that it can be used if normal. In addition, in order to prevent overlapping membership, membership management can be performed based on MAC addresses.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.800-808
• /
• 2022

The International Maritime Organization adopted the interim standards for ship maneuverability in November 1993 for preventing collision of ships at sea and for protecting the marine environment, and based on the accumulated data, in December 2002, the established standards for ship maneuverability were adopted. However, the standards adopted are those at full load, even keel, and at least 90 % of the ship speed at 85 % of the ship's maximum power. Moreover, these standards have limitations in providing information on maneuverability under actual navigational conditions. Therefore, in this study, frequency analysis AHP analysis techniques were studied by consulting navigational officers, captains, and experts, who have significant knowledge on ship maneuverability, utilization of the current standards, and the information necessary for the operation of the actual ship. The results of this study confirmed that the necessary information on maneuverability for the navigational officer operating the vessel is information about the turning circle at a small angle of 5°-10° and z-test information at maneuvering speed, not sea speed. Additionally, in relation to speed control, additional information on deceleration inertia and acceleration inertia is needed than the information on the stopping ability at sea speed and full loaded condition. The derived results are considered to be useful as basic data for preparing guidelines for ship maneuverability necessary for navigational of icers who operate ships.