• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.11
• /
• pp.922-931
• /
• 2017

This research paper describes design procedures and those verification with multi-body dynamic analysis and an experiment for the development of an unprecedented type of canister cover, named as the separating cover. In order to overcome drawbacks from the precious rupture type and actuator driven cover, the separating cover was suggested. It has the simplest structure composed of the previously developed explosive bolt and a spring-lever driven system. First of all, mechanical feasibility with proposed design parameters based on mathematical modeling was confirmed through dynamic analysis and then its results showed good agreement with the followed empirical results acquired from a high speed camera. On top of that, a parametric study was conducted to identify the effect of each design parameter on separating performance. It is highly expected that this research contributes to provide military industries with a brand new canister cover having simplicity and cost efficiency and thus it will be very useful in MLRS(Multiple Launch Rocket System).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.3
• /
• pp.202-209
• /
• 2014

In this paper, we analyzed the effects by multi-stacking superstrates over the circular-polarized patch antenna. The previous works considered a single-layered superstrate or a superstrate with multiple layers, and did not almost consider the axial ratio at the performance analysis. First, the effect of center frequency shift is analyzed by the variation of air-gap height between patch antenna and superstrate. The center frequency is down-shifted at the smaller air-gap height and has almost the same frequency as patch antenna at the air-gap height of $005{\lambda}_0$. Second, the antenna performance is analyzed by multi-stacking superstrates with the air-gap height of $005{\lambda}_0$. As the number of multi-stacked superstrates increase, antenna gain has a linear increase and axial ratio is exponentially deteriorated. In addition, it has also been observed that the antenna performance has the same trend with the number of multi-stacked superstrates as the thickness of superstrate increases. Finally, we confirmed that it is possible to design the CP patch antenna with the scalable gain and less than 3dB axial ratio by stacking the superstrate.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1996.11a
• /
• pp.147-153
• /
• 1996

발사관의 밀폐 및 분리성능을 위해 앞, 뒤 덮개의 재질을 내열성이 높고, 수분흡수성이 낮은 Noryl Plastic 재질로 선정하여 기계적 물성을 확인하였으며 덮개의 형상설계를 하였다. 유한요소 구조해석을 수행하여 분포하중 및 집중하중에 의한 응력상태를 고찰하고 분리성능을 검증하기 위해 공압 및 유도탄 충돌시험을 수행하였다. 이상의 과정를 통하여 개발된 덮개는 여러 가지 체계요구조건을 만족시켜 주는 것을 알 수 있다.

• 베이커리
• /
• no.5 s.382
• /
• pp.128-128
• /
• 2000

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.439-445
• /
• 2012

Only the sand carriers fitted with hopper doors can remove their hatch covers in current regulations. However, there is no sand carriers fitted with hopper doors in korea. Through the analysis of accidents, inspection of equipment installed on ships, and evaluation of stability and seakeeping performance concerning the sand carriers, it is expected that the current exemption requirement is modified for hatch covers for sand carriers. As the result, this paper proposed the removal of hatch covers and be fitted by tarpaulin instead to protect water ingress into the holds. This can be done by making the holds smaller designed to be filled full until the top of the hold without exceeding loadline. Also, the bilge pumps should have the sufficient capacity of pumping water out in the early stage of sand-water mixture to wetted condition in approximately 1 hour and be operationally ready in every voyage conditions.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.256-257
• /
• 2000

유전체 덮개층을 이용한 impurity free vacancy disordering (IFVD) 기술에 의한 양자우물구조의 밴드갭 조절기술은 양자우물을 갖는 광소자의 제작 및 광소자들의 한판 집적에 광범위하게 적용되어 왔다$^{(1-3)}$ . IFVD 기술의 핵심은 유전체 덮개층의 종류 및 그 특성을 적절히 조절함으로써 양자우물의 밴드갭 및 굴절율을 양자우물 기판상에서 공간적으로 조절하는 기술에 있다. 이러한 목적을 위해 SiN$_{x}$ , SiO$_2$, SrF$_2$ 및 WN$_{x}$ 와 같은 많은 유전체 덮개층에 관한 실험들이 진행되었다 $^{(1-6)}$ . (중략)

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.403-406
• /
• 2002

휴대폰의 일반화와 이것의 음향변환기로 사용되는 초소형 스피커 (Micro-speaker) 수요의 증가에 따라 휴대폰의 다양한 기능 및 성능의 개발에 대한 초소형 스피커의 성능개선이 절실히 요구된다. 특히, 초소형 스피커에서 발생된 음의 명료도와 음의 방사효율에 관한 특성의 개선은 당면한 문제이다. 본 연구에서는 초소형 스피커 전면에 진동판 보호를 위해 부착되어 있는 전면 덮개(Front Cover)를 스피커의 명료도와 효율에 관련된 음향적 기구로서 고려하여 일반 휴대폰에 사용되고 있는 초소형 스피커들을 대상으로 전면덮개에 가공된 기공의 면적에 따른 음파의 투과손실을 측정하였다. 또한, 전면덮개와 초소형 스피커 진동판 사이에 존재하는 체적과 전면 덮개의 기공에 대한 음향 임피던스(Acoustic Impedance)를 이론적인 방법으로 구하여 이에 따른 투과손실(Transmission Loss) 및 공명특성을 예측하고 이를 스피커들에 대한 투과손실 측정 결과와 비교하였다. 본 연구의 결과는 초소형 스피커를 제조하는 기업들이 경험적인 방법을 벗어나, 이론적 근거를 바탕으로 제품설계를 수행하는데 기여할 것으로 사료된다.

• Journal of the Korea Concrete Institute
• /
• v.18 no.2 s.92
• /
• pp.233-238
• /
• 2006

In lifetime estimation, the FEM analysis method is proposed for predicting corrosion failure time of concrete structures exposed to sea-water. This study shows that the corrosion rate of rebar in artificial pore solution can be transferred to the corrosion rate of rebar in concrete using the relationship between pore volume and concrete volume by Jennings' model. And this study considered the pitting corrosion effects of reinforcement bar on corrosion failure analysis, rebar size to cover depth and nonlinear crack analysis. These analysis results have good accordance with the experimental results of Williamson's work. This methodology can be applied to lifetime prediction procedure of reinforced concrete structures and also gives more reasonable results of concrete cover failure time estimation of reinforced concrete structures exposed to sea-water.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.795-801
• /
• 2001

A method of miniaturizing branch line coupler is presented. The method utilizes the microstrip line with overlay(or superstrate). The frequency dependent characteristics, dispersion and characteristic impedance, of this line are obtained by Immitance method in spectral domain and Method of Line. The relevant spectral domain Green's function is given and used to obtain numerical results. The branch line couplers with overlays are designed and fabricated at 2 GHz. The experimental results show that the size of coupler with overlay(${epsilon}_r$=10.2) is 31.4 precent smaller than conventional coupler. This minimized coupler is suitable for Butler Matrix as feeder for mobile communication beam forming antenna.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2317-2328
• /
• 2013

In this study, the effect of wave chamber slab on wave pressure along the first and second wall of the perforated caisson breakwater was investigated by performing physical experiment. The experiment was performed without and with the wave chamber slab of the perforated caisson by varying the front wall porosity. The discrepancy in magnitudes of the measured wave pressure along the both walls of the perforated caisson was apparent according to the existence of the wave chamber slab as significantly greater pressures were acquired for all the test cases when the wave chamber was closed upward by the slab. As a result, the magnitudes of the total wave force calculated by integration of the measured wave pressure also were much larger for the caisson breakwater having the wave chamber slab, exceeding the value based on the well known Takahashi's formula (Takahashi and Shimosako, 1994). With respect to the porosity of the front wall, meanwhile, higher pressures were obtained with a larger porosity, at both the first and second wall of the breakwater.