• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.705-706
• /
• 2008

When heat generated inside a large factory building is not discharged due to a stagnant flow, the working environment of workers becomes worse and the cooling of high-temperature products such as hot-rolling coils is delayed. To investigate the natural ventilation inside a large factory building, experimental studies were carried out using wind-tunnel tests. The scale-down factory building models were placed in an atmospheric boundary layer (ABL) and the mean and fluctuating velocity fields were measured using a particle image velocimetry (PIV) technique. For the prototype factory model, the outdoor air is only entrained into the factory building through the one-third open windward wall, and stagnant flow is formed in the rear part of the target area. In order to improve the indoor ventilation environment of the factory building, three different louver-type ventilators were attached at the upper one-third open windward wall of the factory model. Among the three louver ventilators tested in this study, the ventilator model #3 with the outer louver (${\theta}_o$ = 90$^{\circ}$) and the inner louver (${\theta}_i$ = -70$^{\circ}$) was found to improve the natural ventilation inside the factory building model effectively. The flow rate of the entrained air was increased with aligning the outer louver blades with the oncoming wind and guiding the entrained air down to the ground surface with elongated inner louver blades.

• 월간 기계설비
• /
• no.1 s.198
• /
• pp.35-42
• /
• 2007

ESCO란 에너지 절약회사(Energy Saving Company) 또는 에너지 서비스 회사(Energy Service Company)를 뜻하는 용어로 지난 1992년 정부에서 에너지 절약을 촉진하기 위해 정책자금을 도입하면서 등장했다. 이들 기업은 정부에서 정책자금을 빌려 공장이나 아파트 등 에너지 사용자에게 에너지 절약시설을 지어주고 에너지를 줄인양만큼 투자비를 회수해 간다. 고유가가 계속되면서 에너지절약 전문기업인 ESCO 단위 사업규모가 점차 대형화되고 있다. ESCO 투자실적은 1998년 이후 에너지절약 시설 개체 사업의 급속한 증가에 힘입어 매년 급격히 성장하고 있다. 최근에는 2천억원대의 시장규모를 가지고 2005년에는 건당 평균 9.1억원이 지원된 것으로 나타났다. 에너지관리공단 자금지원팀의 자료에 의하면 ESCO투자사업 자금지원은 1993~1998년 197건에 480억원이 지원됐으나 2005년에는 202건에 1,829억원이 지원된 것으로 나타났다. 지난 2006년 9월 말 현재 ESCO투자사업 자금지원은 106건에 1,020억원이 대출 은행에 추천된 것으로 알려졌다. 또한 에스코 사업분야가 조명기기·보일러 등 단순설비 교체에서 열병합발전소·냉난방설비, 공정개선 및 폐열회수 등 복합설비 쪽으로 확대되고 있는 것으로 나타났다. 라서 에너지 소비가 큰 화학 철강 제지 등 산업체, 대형병원, 산업단지 등이 새 에너지 절감 시스템을 도입하면 에너지 효 율성 개선에 효과적인 사업이다. 지는 이번호에 ESCO사업 현황과 투자사례를 게재하고, 다음호에는 ESCO사업 지원시책과 외국의 ESCO활동 현황 및 국내의 ESCO 투자사례를 게재할 계획이다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.978-980
• /
• 2013

In this paper, we have presented a basic idea of a power shut-off client based on NFC (near field communication). For the first step of the system design, we have shown the conceptual diagrams of the hardware configuration and the software logic flow. This system can be applied to the integrated power control in home, office, school, factory, and apartment. The standby power shut-off system will bring saving in electrical energy and cost.

• Journal of Distribution Research
• /
• v.15 no.5
• /
• pp.257-272
• /
• 2010

The DongDeaMoon fashion market was carried out the core role of low price distribution as production and selling illuviation of fashion merchandise. However, the unique and successful fashion merchandising system of DongDeaMoon fashion market has been seriously threatened by consumer need changes as well as by an increased competition from new types of retail stores such as fast fashion brands and online shopping malls. Therefore, this study reviewed the policies for DongDeaMoon fashion market carried out by Seoul Metropolitan City and formulated the policies for strengthening competitiveness of DongDeaMoon fashion market.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.433-436
• /
• 2011

스마트폰, 아이패드, 갤력시S, 탭 등 비약적인 과학기술의 발전으로 생활수준이 향상함에 따라, 한강 르네상스 및 4대강 살리기 사업, 각종 생태하천복원 등 새로운 수변문화공간 구축을 위한 공공 사업에서 첨단무선통신기술을 융합한 신개념의 서비스와 문화가 요구되고 있다. 서울시, 서울인근 지역의 강, 하천에 유량이 유입되는 주요지점에 수중환경감지 센서설치. 주변오염지역 감지 및 수중환경 생태를 실시간 감지하여 이상 징후(BOD, COD, DO, 전도, 탁도 등)발생이 예상되는 주변 오염원인 공장, 폐기처리장, 폐수처리장 등의 시설물을 D/B 관리하여 오염원 관련 피해주민에게 실시간 공지하여 대형사고 예방 및 청정하천 수중환경유지를 목표로 한다. 본 논문에서는 수중환경(하천, 호수, 강 등)대한 지능적이고, 효율적인 관리를 위해 센서수중환경에 적합한 4세대 센서 보드 설계 및 블록다이어그램 설계, 통신기술, 인터페이스 개발을 통해 수중환경에 적합한 센서 및 데이터 획득기술 개발한다.

• Journal of the Korean Institute of Gas
• /
• v.9 no.2 s.27
• /
• pp.28-33
• /
• 2005

Because chemical industrial facilities deal with large amount of hazardous materials, the damage affect to off-site as well as on-site when an accident occurs. So it is necessary to develop a Risk Representation System for effective control and response to major accidents. In this study a Risk Representation System(S/W) was developed to help analyzing actual risk and to set an alternative that can reduce the analyzed risk by drawing the level of individual plant's risk on a digital map network.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.4
• /
• pp.23-36
• /
• 2008

Soil nailing system can be mentioned to a method of supporting as the shear strength of in-situ soils is increased by passive inclusions. In the general soil nailing system, facing walls are used in two kind of a lattice concrete block or a cast in placed concrete wall. A case of lattice concrete blocks is used in slow slopes greater than 1(V):0.7(H). Also, a case of a cast in placed concrete wall is used in steep slopes less than 1(V):0.5(H). The cast in placed concrete walls are constructed to 30 cm thick together with a shotcrete facing. In this study, the assembling soil nailing method as a new soil nailing system will be proposed. This method is assembly construction using precast concrete panels with 20 cm thick. So, the ability of construction and the quality of facings can be improved more than a conventional soil nailing system. This method can be obtained the effects that a global slope stability increase, as precast concrete panels are immediately put on cutting face after excavating a slope. In this study, confining effects of concrete panels using the assembling soil nailing system were found out by large scaled load tests. In the tests, the load-settlement relationship to an assembling soil nailing system due to the stiff facings as concrete panels appeared to be better than a typical soil nailing system with shotcrete facings.

• Journal of the Korean Geographical Society
• /
• v.30 no.1
• /
• pp.16-34
• /
• 1995

This study aims to analyze the impact of cement industry on region change. For this study Maepo-Eub was selected as study area, where three cement factories are located. The data for analysis were obtained from interviews, questionaire surveys and the employee list of each cement factory. The analytic procedures for this study are as follows: 1) The change of regional employment was analyzed by development was industry in terms of the permanent address, education level, occupational status of the employee. 2) The degree of population growth are analyzed by developmental staae of the industry. Some conclusions from this study follows: 1) As these cement factories were built at Maepo in the 1960's, there were plenty of employment opportunities. Thus many technicians and workers flooded in Maepo-Eub. in the 1970's with the expansion of production facilities therewere much more immigrants to the industrial region, while there were outflow in the neighboring rural areas. In the 1980's the opportunity for the employment of cement factories have been decreased due to the introduction of the automation processes and larger, sized machines. Among the employee of three cement factories the native of Chungcheongbukdo (65%; in them Danyang 52%, Jecheon 32%) is dominant, the second is from Kangwon-do (13%), and the third is from Kyungsangbuk-do (11%) adjacent to Chungcheongbuk-do. It means that there are more employment opportunity in the near places of cement factories. 2) In the period of 1960's study area had experineed rapid social increase in population by the development of cement industry. That is, cement industries created new job opportunities and attracted large population concentration into this area. In the period of 1970's the population of the industrial region have increased continuously, while the population of neighboring rural areas have decreased. In the period of 1980's the population of Maepo decreased steadily because of decrease of labour forces through automation and commuting. Thus in the early stage of idustrial development large population concentrated in the neighboring villages of cement factories, and formed residential areas, commercial areas and service areas. As agricultural and was encroached, rural people left their regions to live in the more convenient suburbs. 3) People engaged in cement industry think that cement industry has a favorable influence on regional development, such as creating job opportunity, raising income level, developing business and service sector, and leading high economic growth. While farmers and some people think that cement industries as a pollution causing factories have a harmful influence on regional development, sucha as injuring the crops, causing environmental pollution, and being harmful to health. If pollution problems are solved, I think Maepo will play an important role as a regional center which can offer employment opportunity, business and service function to pheripheral rural areas, and raise a income level.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.1 no.2
• /
• pp.287-298
• /
• 1993

In this study, generation characteristics and distribution situation of the animal fat residue were investigated to identify it's management problems and to propose alternatives for the recycling and final disposal. Generation sources were the meat distribution net-work including about 170 slaughterhouses, 280 meat-packing plants, thousands of meat shops and restaurants etc. The daily total amount of the animal fat residue is about 700 ton/day. More than 60% of the generation sources were concentrated in Seoul metropolitan area. The residue was collected by about 300 men using old-fashioned devices like handcarts, bike and auto bike, transported to the recycling plants by about 60 collection agencies. The residue was processed to produce by-products such as grease, tallow, animal feed ingredient in the recycling plants. At present, however, a great number of unlicensed, and mostly small rendering processors without having pollution control facilities do the unlawful business. These small, old fashioned and unorganized businesses are creating environmental problems by disposing the waste in improper ways such as open burning and dump. Improvement of the distribution network, the large-scale plants, and the estabilishing proper infrastructures were suggested to overcome the problems for the sound fat residues reprocessing industry.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.965-975
• /
• 2014

Pretension PSC (Prestressed Concrete) members are subjected to a certain limit of size as they are generally produced in the off-site plant and transferred to the site due to the large scale of the product on system. In this study, a portable pretensioning production system has been developed, which allow us to apply the pretension method on site. Considering that a 50m span PSC girder using the pretension method requires a pressing device to endure a large jacking force, the portable pretension production system has to ensure safety against such a large pretension jacking force. In this study, the portable pretensioning system to produce a 50m span pretension girder was manufactured by using CFT (Concrete Filled steel Tube) members. In order to understand the stability of the system and the behavior of the elements, a static loading test was conducted and the stability of the proposed portable pretensioning production system was confirmed. The developed portable pretension system was applied to several construction sites and was investigated the problems on site. During the pretension girder and slab members that was producted by this pretension system in construction site, it has be found the several advantages such as simple fabrication processes, reduction of prestress-loss, and a decrease of 15% compared with the fabrcation cost of post-tension girder. After due consideration of the problems, this portable pretension system will be improved.