• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.115-128
• /
• 2002

Dislike the tangent sections, the horizontal curve sections of roads should be designed, considering several factors : one of such factors is widening. In other words, since widening results from that when a vehicle runs on the horizontal curve sections, the rear wheels of the vehicle run not along with tracks of the front wheels but out of that, such offtracking should be exactly investigated and reflected in design of the curve sections. Especially in the case of industrial roads which semi-trailers and large trucks run frequently or arterial roads with small curve radiuses in mountainous regions. serious offtracking Phenomenons result in increasing the risk of accidents. decreasing the capacities and jeopardizing pedestrians' safety on the curve sections. For the offtracking, widening amounts of roads has been determined under the traditional presumption that vehicles run at a low speed and there is no superelevation. In fact, however, since the vehicles run at a high speed as well as at a low speed and the superelevation is installed on the horizontal curve sections in the structural aspect of roads, the existing standards for installing widening have a limitation to reflect exactly actual Phenomenons. In particular, for articulated wheel axles of a tractor and a trailer and long articulated vehicles, not only the offtracking degree is very high but also the interpretation shows different aspects from one of single axles. Comparing and reviewing the results of Korean and foreign studies related to the trailer offtracking model theory and the standards for installing widening, this study developed a realistic dynamic offtracking model which considers geometric structures of roads and speeds of vehicles, suggested how to measure widening with this model and examined applicability of the model. The findings of this study are as follows ; First. a dynamic offtracking model. which considers dynamic movements of a tractor and a trailer and the superelevation, was developed. Second, a new method to measure widening with the developed dynamic offtracking model was developed and a method to measure widening with swept path width was suggested as well. Finally, validity of the current standards for installing widening was examined by determining actual offtracking and widening amounts with the developed model and the applicability was investigated through the case studies. Compared with the existing offtracking models, the dynamic offtracking model developed in this study can reflect practically vehicle speed. dimension and geometric structural aspects of roads. In conclusion, the meaning of this study is that it reviews validity of the current standards for installing widening and provides a base to establish such standards by suggesting new methods to measure the widening with this dynamic offtracking model.

• Radiation Oncology Journal
• /
• v.12 no.2
• /
• pp.225-232
• /
• 1994

Purpose : This study was to obtain the basic dosimetric data using the 10 MV X-ray for the total body irradiation. Materials and Methods : A linear accelerator photon beam is planned to be used as a radiation source for total body irradiation (TBI) in Chonnam University Hospital. The planned distance from the target to the midplane of a patient is 360cm and the maximum geometric field size is 144cm x 144cm. Polystyrene phantom sized $30{\times}30{\times}30.2cm^3$ and consisted of several sheets with various thickness, and a parallel plate ionization chamber were used to measure surface dose and percent depth dose (PDD) at 345cm SSD, and dose profiles. To evaluate whether a beam modifier is necessary for TBI, dosimetry in build up region was made first with no modifier and next with an 1cm thick acryl plate 20cm far from the polystyrene phantom surface. For a fixed sourec-chamber distance, output factors were measured for various depth. Results : As any beam modifier was not on the way of radiation of 10MV X-ray, the $d_{max}$ and surface dose was 1.8cm and $61\%$, respectively, for 345cm SSD. When an 1cm thick acryl plate was put 20cm far from polystyrene phantom for the SSD, the $d_{max}$ and surface dose were 0.8cm and $94\%$, respectively. With acryl as a beam spoiler, the PDD at 10cm depth was $78.4\%$ and exit dose was a little higher than expected dose at interface of exit surface. For two-opposing fields for a 30cm phantom thick phantom, the surface dose and maximum dose relative to mid-depth dose in our experiments were $102.5\%$ and $106.3\%$, respectively. The off-axis distance of that point of $95\%$ of beam axis dose were 70cm on principal axis and 80cm on diagonal axis. Conclusion: 1. To increase surface dose for TBI by 10MV X-ray at 360cm SAD, 1cm thick acrylic spoiler was sufficient when distance from phantom surface to spoiler was 20cm. 2. At 345cm SSD, 10MV X-ray beam of full field produced a satisfiable dose uniformity for TBI within $7\%$ in the phantom of 30cm thickness by two-opposing irradiation technique. 3. The uniform dose distribution region was 67cm on principal axis of the beam and 80cm on diagonal axis from beam axis. 4. The output factors at mid-point of various thickness revealed linear relation with depth, and it could be applicable to practical TBI.

• Korean Journal of Food Science and Technology
• /
• v.46 no.1
• /
• pp.25-32
• /
• 2014

This study aimed to analyze the general ingredients and volatile compounds of ipguk (koji) and nuruk soju distilled under reduced pressure (RP) or atmospheric pressure (AP) conditions. After the secondary brewing process, soju made using ipguk had a final fermentation alcohol content of $18.0{\pm}0.6%$, whereas soju made using nuruk reached $14.3{\pm}1.7%$. The level of succinic acid was the highest in ipguk soju ($7,685.33{\pm}34.97$ ppm), but nuruk soju also showed a high level of succinic acid ($5,945.79{\pm}76.30$ ppm) after its final fermentation. In an analysis of fusel alcohol content, the level of n-propanol in ipguk soju (389.10-397.27 ppm) was similar under different RP (50 cm Hg and 60 cm Hg) and AP conditions ($80^{\circ}C$ and $90^{\circ}C$). Under RP and AP conditions, the isoamyl alcohol/isobutanol (A/B) ratio was similar, ranging from 1.32-1.35. In ipguk soju distilled under RP conditions of 50 cm Hg and 60 cm Hg, the amount of the toxic component, acetaldehyde, was 8.59 and 9.27 ppm, respectively. Under AP conditions, the amount of acetaldehyde in ipguk soju distilled at 80 and $90^{\circ}C$ was 9.80 and 10.63 ppm, respectively, indicating that the amount of acetaldehyde did not differ depending on the distilling method used. These results suggest that the liquor distilled from the mash produced using ipguk under RP conditions may be of a higher quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5877-5884
• /
• 2014

Recently, abnormally cold weather has been reported more frequently in winter due to the climate change and abnormal weather changes. On the other hand, the heating capacity of a railcar may be not enough to warm the cabin under severe cold climatic conditions, which is one of the reasons for the passengers' complaints about heating. In this study, the effects of ambient temperature and heater power on the cabin temperature was investigated to obtain the minimum ambient temperature for the tested railcar. The test railcar was placed in a large-climatic chamber, and various ambient temperature conditions were simulated. The effects of the heater output were investigated by monitoring the cabin temperature under a range of heater output conditions. The mean cabin temperature was $14.0^{\circ}C$, which was far lower than the required minimum temperature of $18^{\circ}C$, under a $-10^{\circ}C$ ambient temperature condition with the maximum heat power. When the ambient temperature was set to $0^{\circ}C$ and $10^{\circ}C$, the maximum achievable cabin temperature was $26.1^{\circ}C$ and $34.0^{\circ}C$. Through calculations using the interpolation method, the minimum ambient temperature to maintain an $18^{\circ}C$ cabin temperature was $-6.7^{\circ}C$ for this car. The vertical temperature difference was higher with a higher power output and higher ambient temperature. The maximum vertical temperature difference was higher than $10^{\circ}C$ in some cases. However, the horizontal temperature difference vs. low temperature (< $2^{\circ}C$) was independent of the power output and ambient temperature. As a result, it is very important to reduce the vertical temperature difference to achieve good heating performance.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.5
• /
• pp.341-358
• /
• 1992

In order to estimate energy budgets of Palaemon macrodactylus, larvae of the shrimp were reared in the laboratory at constant conditions $(25^{\circ}C: 31-32\%o),$ and then juvenile to adult of the shrimp were reared at $15^{\circ}C\;and\;25^{\circ}C$ in the laboratory. Energy used by the reared shrimps were calculated from estimates of data on feeding, growth, molting, metabolism, nitrogen excretion, and energy content. Juveniles and adults reared in the laboratory, which fed on Artemia nauplii, had an average daily growth rates of 0.079 mm/day at $15^{\circ}C\;and\;of\;0.122mm/day\;at\;25^{\circ}C$. The average growth factor* of P. macrodactylus males and females ranged from $3.2\%$ for adult to $13.2\%$ for juveniles individuals, respectively. Intermolt periods were related to body size of the shrimp and to temperature. Average laboratory growth curves were calculated from data on growth factors and intermolt periods to body size of the shrimp at $15^{\circ}C\;and\;25^{\circ}C$. The calorie contents of the shrimp, their molts, eggs and larvae were determined by biochemical composition and oxygen bomb calorimetry. The average amount of energy used in growth for larvae and juvenile to adult were 4.94 cal and 4.55 cal per dry weight in milligram, respectively. The ammount of oxygen used in metabolism was calculated from size, temperature-specific respiration rate. To convert the ammount of oxygen used in respiration into the equivalent energy lost heat was estimated from the data on chemical composition for the larvae and adult, the values was 4.58 cal/ml $O_2$. The energy content per egg was 0.078 cal. The assimilation efficiency estimated by nitrogen content of food and egested faeces gave $61.5\%$ for the larvae. The efficiencies for juvenile to adult ranged between $79.4\%$ and $90.1\%$ The gross growth efficiencies $(K_1)$ and net growth efficiencies $(K_2)$ of P macrodactylus showed $18.33\%\;and 32.63\%$ for total larval stages, ranged from $21.30\%\;to\;31.04\%\;and\;from\;30.03\%\;to\;39.34\%$ for juvenile to adult, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.2
• /
• pp.79-85
• /
• 1981

As one of the fundamental studies for the breeding of marine algae, the effects of several plant hormones (IAA, Gibberellin, 2.4-D, NAA, Kinetin) on the growth of Porphyra-fronds, P. tenera Kjell. form tamatsuensis Miura, were investigated from January 21 to February 21 1981. The fronds used for the experiment were dissected out at $25mm^2$ size, and cultured in modified Provasoli's ESP medium supplemented with various concentrations of each plant growth regulators. The culture was kept under constant water temperature of $5^{\circ}C$ in 14 hrs. photoperiod and illuminated with 2,400 lux by fluorescent light. Based on the results of first experiment, the culture of fronds for the secondary experiment was carried out at $5^{\circ}C\;and\;10^{\circ}C$ in medium containing various levels of Kinetin from April 6 to 24, and compared the growth of two groups at each concentrations with each other, The results obtained are summarized as follows : (1) The best growth efficiencies were observed at 5.0mg/1 of each plant hormones except Gibberellin. Among them, the highest growth-rate was $312.5\%\;(345.3\%\;in\;frond\;size)$ in contrast with control at 5.0mg/1 of Kinetin, and was followed by $257.5\%\;(236.1\%)$ in 2.4-D,$166.7\%(147.6\%)$ in IAA and $141.7\%\;(167.7\%)$ in NAA, but that in Gibberellin was $247.9\%(241.9\%)$ at 10.0mg/l. (2) Especially, the fronds cultured at 5.0mg/1 of Kinetin were deep black-brown in colour, and had vivid, healthy chloroplasts in their all cells. On the contrary, the fronds cultured in other media were discoloured to light black-brown or green-drown, and almost all cells were vacuolated or shrunk gradually into death.(3) There was an obvious difference between the best growth-rates of the fronds cultured at 5.0mg/l of Kinetin at $5^{\circ}C$ and those at $10^{\circ}C$. The former was $366.7\%$, the latter $318.8\%$ but the difference was little at lower concentrations. (4) Many abnormal cells grown up to $25.0-27.5\mu$ in diameter were found among the marginal cells of fronds which showed the best growth in Kinetin, and the fronds wire $41.0-42.0\mu$ in thickness which was thicker by $10.0\mu$ or so than the others. (5) In two fronds at 1.0mg/1 of Kinetin cell-divisions were observed, which might developed into antheridium, but it was doubtful whether due to the efficiency of Kinetin.

• Journal of Animal Environmental Science
• /
• v.9 no.2
• /
• pp.103-112
• /
• 2003

In this study, the distributions of internal climates such as air temperature, humidity, dust, ammonia gas, and air velocity were systematically measured at a mechanically ventilated broiler houses during summer season, with local weather data. The analysis was focused on the suitability, stability, and uniformity of internal climate, resulting in serious stress on chickens and decrease of productivity In the mechanically ventilated broiler house, the difference between measured and recommended air temperatures(suitability) was 10.4C in maximum during the summer time. The difference of air temperature in the house between day and night was $8.7^{\circ}C$ in maximum. And maximal hourly range of internal air temperature at 0.4m height from the floor was $3.7^{\circ}C$ suggesting it maintained thermal uniformity in the broiler house. The $NH_3$ and dust concentrations were pretty low because ventilation was fully performed. The air speed at chicken location was measured 2.2m/s and 1.7m/s, respectively without and with chicken existence.

• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.201-207
• /
• 2017

Objective of this research was to investigate the influence of pre-plant nitrogen levels in root media on plug seedling growth of radish cv. Soksungbommu. To achieve the research purpose, a root medium, the mixture of perlite, coir dust, and peatmoss (volume percentage of 30:35:35) was formulated and the N levels incorporated during mixing were controlled to 0, 100, 250, 500, 750, 1,000, and $1,500mg{\cdot}L^{-1}$. Then, the seeds were sown into 72-cell plug trays in which the root medium was packed. The measurements of growth and analysis of tissue and root media were conducted 2 and 4 weeks after sowing. Elevation of pre-plant N levels raised EC and turned down pH of root media. But, as seedling grew, the pH rose and EC get lowered in all treatments. The EC as well as $NH_4-N$ and $NO_3-N$ concentrations of root media declined gradually until week 2, but those declined sharply between weeks 2 to 4. The seedling growth 2 weeks after sowing showed quadratic response to pre-plant N levels with the highest growth in $250mg{\cdot}L^{-1}$ treatment and lagging growth in the treatments of lower or higher N levels than $250mg{\cdot}L^{-1}$. The seedling growth 4 weeks after sowing showed also quadratic response with the highest growth in $500mg{\cdot}L^{-1}$ treatment. The tissue N contents were get higher and those of K, Ca, and Mg were get lower as pre-plant N levels were elevated. Above results suggest that lower than $250mg{\cdot}L^{-1}$ in pre-plant N levels is optimistic for growth of plug seedling and avoidance of toxic injury in very young stage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.8
• /
• pp.1134-1143
• /
• 2012

The aims of this study were to investigate some macrominerals (Na, Ca, P, K, Mg) in 207 beverages, 19 liquid teas, and 24 liquid coffees. The samples were digested by microwave and determinations of macrominerals were carried out by an Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES). The elements, listed in order of mean value of macromineral content, were potassium $208.4{\pm}298.2mg/L$ ($72.2{\pm}169.8mg/container$)> calcium $89.0{\pm}161.0mg/L$ ($26.0{\pm}57.7mg/container$)> sodium $71.2{\pm}75.0mg/L$ ($20.9{\pm}27.9mg/container$)> phosphorus $55.6{\pm}91.9mg/L$ ($17.9{\pm}33.8mg/container$)> magnesium $6.1{\pm}18.4mg/L$ ($2.4{\pm}10.1mg/container$). All 250 samples contained sodium and potassium, and the detection rate of calcium, phosphorus and magnesium was 88.4%, 93.2%, and 20.4%. The mean ratio of phosphorus to calcium in beverages, liquid teas, and liquid coffees was $4.2{\pm}16.0$ (ND~164.4), and sports drinks showed the highest mean ratio ($48.5{\pm}75.6$) significantly (p<0.05). In case of sodium, detected content exceeding labeling regulations (less then 120%) was observed in 12 samples (5.5%).

• Korean Journal of Animal Reproduction
• /
• v.25 no.2
• /
• pp.155-162
• /
• 2001

These experiments were conducted to evaluate the effects of the administration of exogenous PG $F_{2{\alpha}}$ on hormone concentrations and follicular development in early postpartum(pp) Korean native goats. 1. Plasma PG $F_{2{\alpha}}$ concentrations in PG $F_{2{\alpha}}$ treated goals showed a gradual increase from a low on day 2 (GR-1 : 10 day-treatment group: 6.35$\pm$0.5 and GR-2; 4 day-treatment group: 0.22$\pm$0.2 pg/$m\ell$, respectively) to reach a peak of 21.18$\pm$1.6 or 4.21 $\pm$0.4 pg/$m\ell$ on day 4 after treatment of PG $F_{2{\alpha}}$. 2. Plasma PG $F_{2{\alpha}}$ concentrations in GR-1 goats averaged 9.08 $\pm$1.2 pg/$m\ell$ compared with 5.44$\pm$ 1.8 pg/$m\ell$ in GR-2 goats the day before treatment of PG $F_{2{\alpha}}$. Mean PG $F_{2{\alpha}}$ concentrations thereafter remained low during the treatment period but PG $F_{2{\alpha}}$ concentrations did not differ between the two group. 3. Plasma concentrations of estradiol-17 $\beta$ (E,) in PG $F_{2{\alpha}}$ - treated group were decreased gradually until 2 days after PG $F_{2{\alpha}}$ treatment but mean $E_2$ concentrations began to increase on 3 days and were Inaximal on the 4 days after treatment. 4. Plasma lulenizing hormone (LH) concentrations in PG $F_{2{\alpha}}$ - treated goats were slightly higher than in controls but mean LH concentrations did not differ between the two treatment groups. 5. Plasma prolactin (PRL) concentrations were suppressed in both GR-1(10 day-treatment group) and GR-2(4 day-treatment group) goats compared to saline controls but mean PRL concentrations remained lower in PG $F_{2{\alpha}}$ treated animals during post-treatment period. 6. The mean number of small and medium follicles present when PG $F_{2{\alpha}}$ was administrated was similar in all does but the increase in number of large follicles($\geq$4mm) tended to be higher in PG $F_{2{\alpha}}$ treated group than controls. These results suggest that concentrations of PG $F_{2{\alpha}}$ and estradiol-17$\beta$ were positively correlared with follicular diameter. We conclude that PG $F_{2{\alpha}}$ treatment stimulates follicular development similarly in both GR-1 and GR-2 group.