• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1115-1119
• /
• 2007

우리나라는 몬순기후대에 속하여 매년 홍수가 발생하고 이시기에 저수지로 유입된 탁수로 말미암아 저수지 인근 및 하류하천에 거주하는 주민들의 민원의 대상이 되고 있다. 이에 따라 유역, 저수지, 및 하천을 포함한 포괄적인 대책을 수립하기 위하여 유역과 저수지 그리고 저수지와 하천을 연계한 통합시스템을 구축함으로써 탁수의 거동을 고려한 저수지 운영에 대한 의사결정을 지원하고자 한다. 본 연구에서는 안동 및 임하댐의 연계운영을 통한 하류하천 탁도관리 방안을 수립하고자 동적수질모형인 Koriv1-win 모형을 구축하여 저수지 수질모의 시스템과 연계 가능하도록 하였다. 모형은 안동댐하류로부터 구미수위표 지점까지 134 km에 달하는 구간에 대하여 구축하였으며 대상구간 내에는 내성천을 비롯 5개의 주요지천이 존재하게 된다. 그림 1에는 수리모듈 및 수질모듈의 검증결과를 나타내고 있으며 탁도모의결과를 검증하기 위하여 임하댐 관리단에서 측정한 자료를 이용하였다. 수리해석결과 구미지점의 유량변동을 잘 반영하는 것으로 모의되었고 수질해석결과도 관측치와 상당히 비슷하게 나타나는 것을 알 수 있었다. 한편 안동댐방류수와 임하댐 방류수가 혼합되는 영역에서 2차원적 흐름양상과 각 댐으로부터 방류되는 방류수의 수온과 탁도의 혼합양상을 모의하였으며 실측을 통하여 모의결과와 비교해 보았다. 저수지 하류하천에 대하여 1차원 및 2차원적 수리해석과 수질해석결과를 통하여 하천에서의 탁수전파 거리 및 고탁도 탁수의 도달 시간을 산정할 수 있도록 함으로써 저수지 연계운영을 통한 하류단 탁도저감에 대한 계획수립이 가능하다.을 것으로 판단된다. 철거 선정 체계는 보 철거를 위해서 보 주변 지역 거주민을 설득하며, 하천의 환경 개선을 위한 합리적인 대안 제시를 목적으로 하고 있다. 선정 체계를 바탕으로 주민 협의 및 대안 제시를 통해 결정된 대상 보는 선정 체계 안에서 보 철거 영향 판단 절차에 따라서 보 철거로 인한 수문, 수리, 지형, 수질, 생태 영향을 판단하게 되며, 이와 더불어 사회 경제적인 영향을 평가하게 된다. 평가결과에 따라서 보를 완전히 철거하거나 다른 대안을 고려하여 보를 부분적으로 철거하거나 개량하게 된다.곳으로 1/3의 자기 생산을 담당하고 있었다. $\ulcorner$경상도지리지$\lrcorner$(慶尙道地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와 동년대에 동일한 목적으로 찬술되었음을 알 수 있다. $\ulcorner$경상도실록지리지$\lrcorner$(慶尙道實錄地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와의 비교를 해보면 상 중 하품의 통합 9개소가 삭제되어 있고, $\ulcorner$동국여지승람$\lrcorner$(東國與地勝覽) 에서는 자기소와 도기소의 위

• The korean journal of orthodontics
• /
• v.39 no.1
• /
• pp.36-42
• /
• 2009

Objective: The purposes of this study were to provide an epidemiologic data base related to the orthodontic treatment need and to know the changing trends about treatment modality of private orthodontic clinics. Methods: Distribution, trends and orthodontic treatment plan of malocclusion patients were investigated in 1,620 consecutive patients who had been visited and examined in 4 private orthodontic clinics located in Seoul from 2003-2006. Results: Percentage of male and female patients was 26.9% and 73.1% respectively Age distribution had shown that percentage of the patients above 13 years was 78.9%, and above 19 years was 59.0%. Average age of whole patients was 20.5 years. With regard to Angle classification, each percentage of Class I, Class II division 1, Class II division 2 and Class III malocclusion was 38.9%, 34.8%, 2.3% and 24.0%. The percentage of extraction cases(00.9%) outnumbered nonextraction cases(39.1%) and 46% of extraction cases were upper and lower 1st premolar extraction cases. Patients who had chose treatment with fixed appliance and orthognathic surgery was 10.2%. Conclusions: Because the high percentage of adult, Class II malocclusion and orthognathic surgery cases in patients of private orthodontic clinics were shown in this study, orthodontic education program and national health policy in Korea need reformation.

• Korean Journal of Cleft Lip And Palate
• /
• v.9 no.2
• /
• pp.93-100
• /
• 2006

Although the delayed type of rhinoplasty is currently acceptable in the correction of cleft lip and nasal deformity, Delaire tried to achieve the simultaneous nasolabial reconstruction and muscular rearrangement that affect the subsequent skeletal growth of the face. the anatomic muscular reconstruction can be achieved by making the anchorage of the nasolabial muscles of the cleft side to the nasal septum and muscles on the non-cleft side. Two cleft lip patients of 6 and 7 year-old without any previous operation history were treated with the functional cheilorhinoplasty. One patient with incomplete cleft lip underwent a cheiloplasty along with the rearrangement of orbicularis oris muscle. The other patient had a complete cleft lip and palate with accompanying nasal deformity, who underwent the functional cheilorhinoplasty with the reconstruction of anterior nasal base. All the operation was done under the general anesthesia and patients healed without any significant complications. In the incomplete case, the shapes of Cupid's bow was restored, and the length of columella was regained comparable to the non-affected side. In the complete cleft lip and palate case, the depressed nostril was reconstructed with acceptable symmetry by complete releasing of deformed alar cartilage undermined with a dissecting scissors. In summary, the functional repair of cleft lip and nose could be possible at the same time by using Delaire method. This method is effective to correct the primary nasolabial deformity, which results in the restoring favorable anatomy and its function.

• Journal of Korean Society of Forest Science
• /
• v.32 no.1
• /
• pp.9-15
• /
• 1976

Financial rotations of Pinus koraiensis stands are calculated and compared on the basis of five basic financial maturity concepts. The rotations given by the forest rent and average annual gross revenue models are in excess of sixty years by adopting zero interest rates of capital and forest lands. IRR model also neglects land value and highly sensitive to the changes of fixed and regeneration costs. The Faustmann doctrine recommands rotation ages of 23-39 years depend upon applied interest rates and site indices, and seems to be most adequate for determining financial maturity. It is however the situation in Korea that economic conditions are changing rapidly, and thus a model which does not require many exogenous variables in calculation process is preferable. The Duerr's solution has a basic simplicity and logic which is appealing from both a theoritical and practical viewpoint, and most adaptable to the Korean situation, even though the model completly neglects the opportunity cost for forest land. There is a tendency to reduce rotation length with the increase of site quality, but the difference is negligible.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.2
• /
• pp.238-247
• /
• 2021

Congenital tooth agenesis is the most common developmental dental anomaly, of which oligodontia is defined as the absence of six or more permanent teeth, except the third molars. Tooth agenesis causes malocclusion, alveolar atrophy, aesthetic and psychosocial problems. This clinical report describes a multidisciplinary treatment for a patient diagnosed as oligodontia, who exhibited absence of 14 permanent teeth, atrophy of maxillary alveolar bone, and mandibular protrusion. Restoration space was secured and tooth axis was improved by the extraction of deciduous teeth and orthodontic treatment. However, edge-to-edge bite of posterior teeth and arch dimension discrepancy due to atrophic maxilla was remained. To restore the aesthetics and functionality, implant retained prosthesis was planned. Considering minimal bone grafts, location and number of dental implants and prostheses design were determined. Through the gradual adjustment of provisional restoration, the appropriate centric and eccentric occlusion was reflected into a definitive prosthesis. Currently, stable functional results were attained, however, regular follow up and maintenance care over lifetimes should be performed.

• Journal of Platform Technology
• /
• v.9 no.2
• /
• pp.38-45
• /
• 2021

A frequently used bioimpedance analytical method in Korea is the segmental multi-frequency BIA (SMF-BIA) method, but it is not directly determined at a segmented impedance. This study was to compare SMF-BIA determinations with direct segmented determinations for accuracy and appropriateness of segment parameters. This study is to compare the segment parameters, accuracy and appropriateness of the multi-frequency segmental bioimpedance analysis. To this end, 108 elderly individuals were measured. Segmented bioelectrical measurements obtained from a SMF-BIA (Inbody S10) at 50 kHz and measured with a phase sensitive single frequency device (SF-BIA, bia-101, RJL / akern systems) were compared. The significant difference (%) was demonstrated between single - and multiple frequency determinations of the right upper limb (R = 35.5 ± 6.2%, P < 0.001; Xc = 2.7 ± 7.6%, P < 0.01), left upper limb difference (R= 33. 9 ± 6.0%, P < 0.001; Xc = 2.8 ± 8.3%, P < 0.01), right lower limb difference (R = 18.6 ± 4.3%, P < 0.001; Xc = 25.8 ± 10.0%, P < 0.001), left lower limb difference (R = 18.0 ± 4.7%, P < 0.001; Xc = 31.8%). Of the results determined with the two BIA methods, the impedance measurements of the limbs and whole body showed a high correlation (RA: R = 0. 950, LA: R = 0. 949, RL: R = 0.899, LL: R = 0.88), and in the agreement test, the impedance values of the upper limbs and whole body also showed strong agreement (ICC > 0.9), but in the Xc, the correlation was weak. In conclusion, it was found that although bioimpedance devices had significantly different characteristics and inconsistent cross sectionally, there was a high population level agreement in the upper and lower extremities in determining segmental resistance value changes. But a large error was found on the trunk. Further studies were needed for reducing the error.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.3
• /
• pp.359-369
• /
• 2021

Implant prostheses and removable partial dentures are mainly used as treatment methods for partial edentulous patients who have lost a number of teeth. The implant-assisted removable partial denture (IARPD) is strategically selected. The defect in maxillofacial structure due to osteomyelitis, a type of facial bone infection, causes dysfunction such as mastication, swallowing, and pronunciation, as well as social and psychological effects, so a removable restoration is required to restore the supporting tissue. Design of abutment and partial dentures is an essential factor in the success of treatment. In this case, IARPD, which has superior retention and stability compared to traditional removable partial dentures, can have a good prognosis. In a partial edentulous patient with bone defects due to osteomyelitis treatment, the stability of the denture was secured with IARPD restoration. Moreover, maintenance problem that may occur in the future was minimized by providing an appropriate denture design and occlusal scheme through several provisional restorations. This case can be expected to have a favorable prognosis in the long term.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.2
• /
• pp.117-126
• /
• 2020

Total knee arthroplasty is performed widely in degenerative arthritis of the knee joint, and the frequency of use is increasing. Efforts should be made to achieve functional recovery, such as returning to daily life, and the recovery of strength and range of motion after surgery. The procedure should be approached from a range of perspectives, such as patient factors, surgical technique and rehabilitation. The patient's age, degree of obesity, sex, and strength of the quadriceps muscle can affect the functional recovery after surgery. In addition, the patient's mental state, such as expectation value and satisfaction, can also have an effect. For functional recovery, patient education, pain control, and strengthening of the quadriceps muscle can be performed prior to surgery. Postoperative physiotherapy, such as icing and compression, transcutaneous electrical nerve stimulation therapy, neuromuscular electrical stimulation therapy, low frequency low intensity magnetic field therapy, strengthening of quadriceps muscle, and range of motion exercise can also be applied. In recent years, hydrotherapy, which restores the strength and balance of the leg, is being performed increasingly. These treatments are not only performed shortly after surgery, but are also performed continuously. In addition, the surgeon should apply it appropriately considering the patient's condition, compliance, and social and psychological conditions.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.8
• /
• pp.99-106
• /
• 2006

In the present study, in order to clarify the effects of latent hydraulic property of granulated blast furnace slag (GBF slag) on the liquefaction, GBF slag was cured in the high temperature alkali water (adding the calcium hydroxide, pH=12, water temperature is about $30^{\circ}C$), and then the cyclic and the static tri-axial compression tests were carried out. Then the results were compared with those for Japanese standard sand of Toyoura sand and natural sand of Genkai sand. From the test results, it is clarified that the liquefaction strength of the GBF slag increases with the increase of the curing period by the hardening due to the latent hydraulic property. It is also shown that GBF slag with Dr=50% and 80% which was cured for 189 days in the fresh-water shows cohesion due to developing of latent hydraulic property. In addition, as for the liquefaction strength of GBFS during the hardening process, a linear relation between the cyclic stress ratio $R_{20}$ at the number of stress cycles Nc=20 and cohesion $C_{d}$ was observed. It is also clarified that the liquefaction strength for cured GBF slag in the high temperature alkali water is predicted by the cohesive strength or the unconfined compressive strength.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.12
• /
• pp.13-22
• /
• 2008

Fourteen calibration ehamber tests were performed using one cylindrical and two tapered piles with different taper angles to investigate the changes of the bearing capacity of tapered piles with soil state and taper angle of piles. The results of calibration chamber tests show that the ultimate base resistance of tapered piles increases with increasing mean stress and relative density of soil. It also increases with increasing taper angle for medium sand, but with decreasing taper angle for dense sand. The ultimate shaft resistance of tapered piles increases as vertical and horizontal stresses, relative density and taper angle increase. Based on the results of model pile load tests, a new design method with shape factors for estimation of the bearing capacity of tapered piles is proposed considering the effect of soil state and taper angle on bearing capacity of tapered piles. In order to check the accuracy of predictions calculated using the new method, middle-scale field pile load tests were also conducted on cylindrical and tapered drilled shafts in clayey sand. Comparison of calculated values with measured ones shows that the new design method produces satisfactory predictions tor tapered piles.