• Journal of the Korean Wood Science and Technology
• /
• 제31권4호
• /
• pp.31-37
• /
• 2003

국내에 많이 조림되어 있는 은사시나무(Populus alba×P. glandulosa)의 효율적인 건조를 위해 기본적인 물리적 성질을 조사하였다. 캠퍼스에서 벌채한 원목을 32 mm 판목 판재로 제재하여 관행열기건조(저온건조), 고온건조, 마이크로파-진공(MW/V)건조의 3가지 방식으로 건조하여 건조속도, 건조결함, 길이방향 수분경사, 색상 등을 비교하였다. 평균생재비중(전건무게-생재부피 기준)은 0.349±0.074였으며, 심재의 생재함수율은 200% 내외, 변재는 100%내외로 심재 함수율이 더 높았다. 생재에서 전건까지의 수축율은 방사방향과 접선방향이 각각 2.4%와 7.3%였으며 심·변재간 차이는 없었다. 생재에서 함수율 10%까지 건조시간은 컨디쇼닝시간을 제외하고 저온건조는 65시간, 고온건조는 35시간, MW/V건조는 22시간이었으며, 건조목 표면을 색차계로 조사한 결과 MW/V건조 판재의 색상이 가장 밝고 깨끗하였다.

• 한국산업융합학회 논문집
• /
• 제25권6_2호
• /
• pp.1055-1062
• /
• 2022

In this study, the mechanical properties of 80% cold-rolled austenitic 316L stainless steel were evaluated using specimens subjected to reverse transformation at 500-750℃ for 20 minutes and reverse transformation at 700℃ for 2-60 minutes. Also, for the elastic wave obtained from the tensile test, the dominant frequency according to the reverse transformation condition was investigated by time-frequency analysis. The SEM image of the 80% cold-rolled material was transformed into martensite and showed line and cross shapes. The TEM image showed that line shapes were shown at the grain, and grain boundary of martensite. The higher the heat treatment temperature and the longer time, the larger the grain. Tensile strength decreased as the heat treatment temperature and time increased, but elongation increased. Hardness was proportional to tensile strength. This is because the grain with different directions showed the same direction due to reverse transformation. The dominant frequency was decreased and then increased as the temperature and time increased. This is because the direction of the grain is different at a low temperature and the same direction is shown at a high temperature.

• 한국광학회지
• /
• 제33권1호
• /
• pp.22-27
• /
• 2022

격자의 구조가 간단하고 격자의 대조비가 낮은 SBC 시스템 구성을 위한 무편광 유전체 다층박막 회절격자를 제작하였다. 제작된 박막의 굴절률과 두께 오차로 인하여, 제작된 회절격자의 회절 효율은 설계보다 낮은 값을 나타내었다. 오차를 발생시킨 원인을 분석하고, 제작된 회절격자 위에 추가의 코팅을 통하여 회절 효율 보정이 가능함을 시뮬레이션을 통하여 확인하였다. 시뮬레이션 결과를 확인하기 위하여 제작된 회절격자 위에 Ta₂O₅ 추가층을 제작하고 회절격자를 측정한 결과 회절 효율 보상이 이루어졌으며, 최고 91.7%의 무편광 회절 효율을 얻었다.

• 반도체디스플레이기술학회지
• /
• 제22권1호
• /
• pp.134-138
• /
• 2023

This study focuses on the analysis of the results of computational fluid dynamics simulations of mist-chemical vapor deposition for the growth of an epitaxial wafer in power semiconductor technology using artificial intelligence techniques. The conventional approach of predicting the uniformity of the deposited layer using computational fluid dynamics and design of experimental takes considerable time. To overcome this, artificial intelligence method, which is widely used for optimization, automation, and prediction in various fields, was utilized to analyze the computational fluid dynamics simulation results. The computational fluid dynamics simulation results were analyzed using a supervised deep neural network model for regression analysis. The predicted results were evaluated quantitatively using Euclidean distance calculations. And the Bayesian optimization was used to derive the optimal condition, which results obtained through deep neural network training showed a discrepancy of approximately 4% when compared to the results obtained through computational fluid dynamics analysis. resulted in an increase of 146.2% compared to the previous computational fluid dynamics simulation results. These results are expected to have practical applications in various fields.

• Human Ecology Research
• /
• 제60권4호
• /
• pp.609-623
• /
• 2022

As human life and welfare become more valued in the Fourth Industrial Revolution era, the role and mission of human ecology are expanding. Therefore, a career exploration and education program for high school students covering all the academic fields of human ecology may be necessary. To investigate what would be needed to develop such a program, a focus group interview (FGI) targeting experts within the same field and a survey targeting high school students were conducted. As a result of the FGI, a total of 3 categories and 7 subcategories were identified. The three categories included "human ecology and high school education," "human ecology and career choices," and "education program development and management in human ecology." The results of the high schoolers' survey showed that they had a moderate level of awareness about careers related to human ecology majors, but their interests and known information about human ecology programs in universities were low. Within the sub-content of each major, the contents with the highest educational needs were fashion product management, nutrition by disease, housing market analysis, personal financial management, and children's rights and welfare. If a career exploration and education program is implemented in the future, the most preferred type is a mentoring program by professors, students, and graduates in the field of human ecology. In conclusion, it is necessary to develop and implement an integrative education program about human ecology majors based on the educational needs of high school students.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.338-338
• /
• 2023

최근 특정 지역에 짧은 시간동안 많은 강우가 내리는 국지성 집중호우가 빈번히 발생하고 있으나, 이에 대한 예측과 대비에도 불구하고 피해는 지속적으로 증가하고 있다. 지속적인 강우량 증가 추이로 시간최대 및 일최대 강우량 관측기록이 해마다 갱신되고, 도시, 하천 및 주요 홍수방어 시설의 설계용량을 초과하는 피해가 발생하고 있다. 다수의 인구가 거주하고 대규모 기반시설이 집중된 도시지역에서 발생하는 집중호우는 심각한 인명 및 재산피해로 이어질 수 있다. 따라서, 부처별 재난의 저감대책은 정량적인 피해규모의 피해금액 예측보다는 설계 빈도에 대한 규모의 크기로 대책을 마련하고 있다. 국내에서는 풍수해 피해를 저감시키기 위해 개발에 따르는 재해영향요인을 개발 사업 시행 이전에 예측·분석하고 적절한 저감대책안을 수립·시행하고 있으나 설계빈도에 대한 규모일 뿐 정량적인 저감대책으로 예방되는 피해금액은 알 수 없다. 본 연구에서는 재해연보를 기반으로 호우재해(호우, 태풍)에 대한 시군구-재해기간의 피해데이터를 1999년부터 2019년까지 총 20년의 빅데이터와 전국 68개 강우관측소를 대상으로 총 20년(1999년 ~ 2019년)의 강우자료를 구축하였다. 머신러닝의 학습별 알고리즘을 조사하여 호우재해 피해데이터의 적용성이 높고 다양한 분야에 적용이 가능한 Neural networks의 분석기술인 ANN기법을 선정하였다 피해데이터의 재해발생기간별 총강우량, 일최대강우량, 총피해금액에 대하여 1999년 ~ 2018년을 학습하고 2019년에 대하여 강우특성과 피해특성의 분석하였다. 분석결과 Neural Networks의 지도학습은 총 6,902개 중 2019년을 제외한 6,414개를 학습하였으며 분석 타깃은 호우재해의 피해규모를 분석할 수 있는 총강우량, 일최대강우량, 총피해금액에 대하여 은닉노드 5개씩 2계층에 대하여 분석하였다.

• 열처리공학회지
• /
• 제36권5호
• /
• pp.311-317
• /
• 2023

An autofilter is a device that removes impurities contained in heavy fuel oil used in diesel engines of ships or power plants, and also automatically removes impurities accumulated in the filter through a reverse washing function. The reducer-integrated motor serves to rotate the filter at low speed to enable reverse automatic cleaning in the autofilter device. To achieve a low speed of 0.65 to 0.75 rpm in a reducer-integrated motor, a small motor that can operate at 97rpm at a rated voltage of 110 V and 112.5 rpm at 220 V is required. Additionally, a large gear ratio of 1/150 is required. To ensure the durability and reliability of these reducers, the strength of the gear must be evaluated at the design stage. In general, there is a limit to evaluating the stress and strain state according to the vibration characteristics acting on each gear in the driving state of the reducer through quasi-static analysis. Therefore, in this study, the operation characteristics of the auto filter's reducer-integrated motor were first analyzed using the rigid body dynamics analysis method. Then, this rigid body dynamics analysis model was extended to a flexible multibody dynamics analysis model to analyze the stress and strain states acting on each gear and evaluate the design feasibility of the gear.

• 임상간호연구
• /
• 제29권1호
• /
• pp.42-55
• /
• 2023

Purpose: This study was conducted to update nursing practice guidelines for intravenous infusion published in 2017. Methods: The guideline update process was carried out using 22 steps developed by NICE and SIGN. It was agreed to update domains related to central venous infusion therapy. Contents related to peripheral infusion would be updated later. Results: Updated guidelines for central venous infusion therapy consisted of 6 domains and 195 recommendations. The number of recommendations by domain was 11 for general instruction, 14 for central vascular access devices (CVAD) and add-on devices, 13 for nursing management before insertion of CVAD, 30 for management during insertion of CVAD, 51 for management after insertion of CVAD, and 76 for complications. A grade was 29 (14.9%), B grade was 87 (44.6%), and C grade was 79 (40.5%) in the strength of recommendations. A total of 37 (19.0%) recommendations were newly developed and 23 (12.3%) previous recommendations have been modified. The newly developed recommendations were mainly related to the infection control methods. Conclusion: The updated guideline is focused on safe maintenance of central venous infusion therapy. Through this guideline, it is hoped to minimize the occurrence of complications and improve the standardization and efficiency of nursing practice.

• 한국지열·수열에너지학회논문집
• /
• 제18권4호
• /
• pp.1-11
• /
• 2022

In this study, the thermal runaway of NCM and LFP batteries were compared and analyzed through numerical analysis under various conditions. Comparing the thermal runaway of the NCM622 (18650) battery cell and the LFP (18650) battery cell through oven test simulation, the LFP battery did not show thermal runaway, whereas the NCM622 battery temperature increased to 710℃ in 12 minutes. To observe the thermal runaway and propagation of the prismatic LFP battery cell, the internal temperature was set at 200℃ and the oven test simulation was conducted. It was found that thermal runaway occurred at 391℃ after 47 minutes. As a result of observing thermal runaway propagation by placing five NCM622 and LFP battery cells, the thermal runaway propagation was clearly observed in the case of the NCM622 battery, but in the case of the LFP battery, thermal runaway was not observed after the first cell. From the third battery cell, it was confirmed that the temperature change was very insignificant, and through this, it is considered that the LFP battery is relatively safe compared to the NCM battery in terms of the thermal runaway propagation of the battery.

• 사물인터넷융복합논문지
• /
• 제8권1호
• /
• pp.23-29
• /
• 2022

본 연구의 개발대상 제품은 선박 및 발전용 EGB(Exhaust Gas Boiler-폐열보일러) 종류로써 디젤 엔진, 가스 엔진, 가스 터빈 등에서 나오는 배기 가스의 여열을 이용하여 물을 가열하여 고온·고압의 증기나 온수를 발생시키는 열회수 장치이다. 발생된 증기나 온수는 선박의 선실 난방 및 온수 시설이나 HFO Heating, 터빈 구동에 필요한 동력원으로 사용된다. 폐열보일러의 원리는 여열을 가진 고온의 배기 가스가 보일러의 Tube를 통과하면서 물을 데우는 역할을 한다. 데워진 물은 스팀 형태로 선실이나 터빈장치로 보내어져 사용하게 되는 구조이다. 본 연구에서는 EGB의 열전달 부품인 관형 튜브를 Plate Tube로 대체하여 열전달 표면을 늘려 효율을 극대화하는데 목표가 있다.