Browse > Article
http://dx.doi.org/10.17664/ksghe.2022.18.4.001

Numerical Comparative Study on the Thermal Runaway of NCM/LFP Batteries of the Same Geometry  

Myung-Bo Gang (Department of Mechanical Engineering, Jeju National University)
Woo-Young Kim (Department of Smart Electric Vehicle, Korea Polytechnics)
Nam-Jin Kim (Department of Mechanical Engineering, Jeju National University)
Publication Information
Journal of the Korean Society for Geothermal and Hydrothermal Energy / v.18, no.4, 2022 , pp. 1-11 More about this Journal
Abstract
In this study, the thermal runaway of NCM and LFP batteries were compared and analyzed through numerical analysis under various conditions. Comparing the thermal runaway of the NCM622 (18650) battery cell and the LFP (18650) battery cell through oven test simulation, the LFP battery did not show thermal runaway, whereas the NCM622 battery temperature increased to 710℃ in 12 minutes. To observe the thermal runaway and propagation of the prismatic LFP battery cell, the internal temperature was set at 200℃ and the oven test simulation was conducted. It was found that thermal runaway occurred at 391℃ after 47 minutes. As a result of observing thermal runaway propagation by placing five NCM622 and LFP battery cells, the thermal runaway propagation was clearly observed in the case of the NCM622 battery, but in the case of the LFP battery, thermal runaway was not observed after the first cell. From the third battery cell, it was confirmed that the temperature change was very insignificant, and through this, it is considered that the LFP battery is relatively safe compared to the NCM battery in terms of the thermal runaway propagation of the battery.
Keywords
NCM; LFP; Battery; Thermal runaway; Propagation;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Hatchard, T. D., MacNeil, D. D., Stevens, D. A., Christensen, L., and Dahn, J. R., 2000, Importance of Heat Transfer by Radiation in LiIon Batteries during Thermal Abuse, Electrochem. Solid-State Lett. Vol. 3, pp. 305- 308.
2 Hatchard, T. D., MacNeil, D. D., Basu, A., and Dahn, J. R., 2001, Thermal model of cylindrical and prismatic lithium-ion cells, J. of The Electrochemical Society, Vol. 148, No. 7, pp. A755-A761.   DOI
3 Wang, H., Dua, Z., Ruib, X., Wang, S., Jin, C., He, L., Zhang, F., Wang, Q., and Feng, X., 2020, A comparative analysis on thermal runaway behavior of Li (NixCoyMnz) O2 battery with different nickel contents at cell and module level, J. of Hazardous Materials, Vol. 393, pp. 122-361.
4 Churchill, S. W. and Chu, H. H. S., 1975, Correlating equations for laminar and turbulent free convection from a vertical plate, I. J. of Heat Mass Transfer, Vol. 18, No. 11, pp. 1323-1329.   DOI
5 Bloomberg, N. E. F., "Energy Storage Investments Boom As Battery Costs Halve in the Next Decade", 2019 https://about.bnef.com/blog/energy-storage-investments-boom-battery-costs-halve-next-decade/
6 Kim, H. S., 2020, Rechargeable battery Overweight, Equity research of Hana Financial Investment.
7 Al Hallaj, S., Maleki, H., Hong, J. S., and Selman, J. R., 1999, Thermal modeling and design considerations of lithium-ion batteries, J. of Power Sources, Vol. 83, No. 1-2, pp. 1-8.   DOI
8 Pesaran, A., Bharathan, D., Kim, G. H., Vlahinos, A., and Duong, T., 2005, Improving battery design with electro-thermal modeling, Proceedings of the 21st Electric Vehicle Symposium, Monte Carlo, Monaco.
9 Bharathan, D., Pesaran, A., Kim, G. H., and Vlahinos, A., 2005, Electro-Thermal Modeling to Improve Battery Design, Proceedings of the IEEE Vehicle Power and Propulsion Conference IEEE, Chicago, IL, USA.
10 Kim, G. H., Pesaran, A., and Spotnitz, R., 2007, A three-dimensional thermal abuse model for lithium-ion cells, Journal of Power Sources, Vol. 170, pp. 476-489.   DOI
11 Spotnitz, R. M., Weaver, J., Yeduvaka, G., Doughty, D. H., and Roth, E. P., 2007, Simulation of abuse tolerance of lithium-ion battery packs, J. of Power Sources, Vol. 163, pp. 1080-1086.   DOI