• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.289-295
• /
• 2017

The International Maritime Organization (IMO) in accordance with the regulations with respect to the combustion gases, such as NOx, SOx generated by the marine engine. The combustion gases must be equipped with a device to reduce emissions from all ships passing through the Baltic SECAs. In Korea, the International Maritime Organization (IMO) and the development of a device for NOx, SOx reduction. Scrubber is used in the ammonia water and the Urea solution in the waste water. The waste water containing ammonium nitrate and ammonium sulfate, react of the NOx and SOx gas. In this study, the recovery of by-product, which contains the waste water was used as an organic solvent extraction method of salting out. Ammonium nitrate and ammonium sulfate, the recovery process. A qualitative analysis of the collected by-product FT-IR analysis. Through the elemental analysis and SEM-EDS, characteristic evaluation was performed with an impurity.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.2
• /
• pp.79-86
• /
• 2001

This study shows an attempt to generate an assembly sequence and its model for a ship block assembly using the graph theory and graph algorithms. To generate the ship block assembly, we propose four levels of the ship block assembly model such as "geometry mode1", "relational model", "sequential mode1", and "hierarchical model". To obtain the relational model, we used surface and surface intersection algorithm. The sequential model that represents a possible assembly sequence is made by using several graph algorithms from the relational model. The hierarchical model will be constructed from the sequential model in order to represent the block assembly tree and so forth. The purpose of the hierarchical model is to define an assembly tree and to generate the Bill Of Material(BOM). Lastly, the validity of the method proposed in this study is examined with application to ship block assembly models of a single type and double type according to four models mentioned above.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1124-1131
• /
• 2011

This study performed the prediction about the indoor contaminant's diffusion characteristics which can be affected by the mechanical ventilation system on a training ship. The results are as followings. It is clear that the contaminants are spread to most of the indoors, regardless of the contamination beginning zone. About 65~100 minutes later, the contaminant densities of whole indoor zones are evaluated as clean. Comparing the contamination beginning zone being located at higher deck(scenario A) to the contamination beginning zone being located at lower deck(scenario B), although the contaminant density by scenario A is 10 times higher than that by scenario B, the number of contaminated zones are 50% less. The contaminant densities are evaluated as to be rapidly decreased when the outside air induction ratio against design volume is over 75%.

• International Commerce and Information Review
• /
• v.14 no.4
• /
• pp.339-360
• /
• 2012

We have more risks in international trade market than in the domestic business market because economic activities are going on with business transactions in different countries. K-sure's Refund Guarantee System is the most important system for Korean Small and Middle Shipbuilding Industries' business, but Korean exporters of Shipbuilding Industries are more interested in export financing through K-sure rather than its financial supporting services. The export insurance becomes more important service for international trade business and it its count as the only one indirect way of supporting export business because export insurance is accepted internationally under the WTO system. Also, it is the only measure that can cover emergency risk, credit risk, exchange risk which cannot be covered by private insurance. As the major risk manager for Korean exporters, the K-sure needs to provide an integrated risk management service for customers. Korean exporters can take more challenges in ever competitive international trade market and we can witness promotion of export in the future which is essential to Korea's economic growth.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.2
• /
• pp.172-178
• /
• 2014

This study suggests the minimum critical external forces based on the assessment of anchoring safety to single anchor situation for representative 8 number of ships in E-group anchorage of Ulsan port. Assessment of anchoring safety is compared holding powers of anchor with external forces of wind, wave and current. Holding powers was reflected materials of seabed, equipment numbers regarding anchor and chain weight, also external forces acting on a hull was calculated considering projected wind area and wetted surface area to the full and ballast conditions respectively. The results of anchoring safety assessments to single anchor showed that the minimum criteria of dragging anchor is a little different from ship's type, size and loading conditions. Bulk carrier can be dragged over the 15m/s of winds and Tanker can be dragged over the 13m/s of winds in case of less than 2knots of currents speed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.2
• /
• pp.279-287
• /
• 2022

With the advancement of cyber threats and the development of hacking technologies, cyber security is being emphasized in various fields such as automobiles and ships. According to this trend, various industrial fields are demanding cybersecurity, and related certifications. In this paper, cybersecurity type approval is compared with the RMF stage under the premise that there are common elements with RMF in that cybersecurity elements must be reflected in the entire system development cycle. For comparison, type approval of maritime cyber security of the Korean Register of Shipping was selected. In conclusion, although type approval of maritime cyber security acquisition procedure is not divided by development stage like the RMF, there are the commonalities in the procedure to apply the cybersecurity element to the System development lifecycle like the RMF. Accordingly, the possibility of determining that the cybersecurity element was applied to the entire development cycle was confirmed.

• Journal of Korea Port Economic Association
• /
• v.39 no.1
• /
• pp.47-63
• /
• 2023

In smart ports and port automation, the number of vertically deployed container terminals is growing. The purpose of this study is to analyze the productivity of horizontally arranged and vertically arranged container terminals by comparing the main ship operation time, and to recommend future strategies for increasing the operational efficiency of vertically configured container terminals. To achieve our goal, we chose two terminals representating each type, and collected berth allocation status data from 2018 to 2022. Then we analyzed the data using the Accelerated Failure Time (AFT) model, a parametric survival analysis technique. Under the assumption that the working circumstances of the C/C (Container Crane) are the same, we find that the productivity of on-board work of the vertically placed container terminal is higher than that of the horizontally placed container terminal. Our result also shows that the productivity is reduced during the COVID-19 period and the European ships show lower onboard work time. On the basis of these findings, we propose strategies to improve the productivity of vertical container terminals.

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.4
• /
• pp.209-215
• /
• 2022

The International Maritime Organization, which is in charge of the international maritime environment and ship safety, has rapidly promoted cyber systems for international dimension agreement and efficiency improvement and improved nautical efficiency. Nevertheless, maritime cyber system attacks still occur every year, and in particular, the number of international maritime cyber security incidents in 2021 appeared to increase sharply compared to 2020. This paper discusses the areas that should be taken into account in order to reduce the increasing sophistication of maritime cyber security. To this end, we will look at typical cases of cyber attacks that have increased sharply in 2021 and analyze the causes of the continuous occurrence of maritime cyber security incidents. In addition, we present several cyber system proposals regarding the current state of maritime cyber systems and the solutions to the problems they face, as well as the matters to be addressed for future maritime cyber systems that will be advanced.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.04a
• /
• pp.235-239
• /
• 1996

분류가 모서리에 충돌할 때 발생하는 순음성 소리인 쐐기소리(edgetone)는 공력음향의 대표적인 현상으로서 지금까지 수많은 연구가 있어 왔으며 그 대부분의 특성이 규명되었다고 할 수 있다. 쐐기소리의 발생기구인 되먹임(feedback) 이론을 처음으로 제안한 이는 Powell로서 그는 되먹임사이클의 위상조건에 의하여 주파수특성에 관한 모델을 제안하였으며, 최근 그 모델의 위상인자에 관하여 Kwon은 새로운 값을 제안한 바 있다. 그런데, 쐐기소리의 이론은 주로 분류가 쐐기나 벽에 충돌할 경우에 집중되어 왔으며 분류가 원통에 충돌하여 발생하는 경우에 관한 연구는 Krothapalli의 초음속분류에 관한 연구와 Mochizuki등의 아음속분류에서 원통지름의 영향에 관한 연구를 들 수 있을 뿐이다. Mochizuki등은 원통의 지름이 노즐의 높이보다 작은 경우에 쐐기 소리의 주파수가 원통의 와류이탈(vortex shedding) 주파수와 같은 것을 관찰하였다. 그러나 분류와 원통이 작용하여 발생하는 쐐기소리의 주파수 특성에 관한 이론적 해석을 시도한 연구는 없으며 또한 방사음장의 특성에 관하여도 Han과 Kwon에 의한 모델이 발표된 바 있으나 실험적으로 입증되지 못하였다. 따라서, 본 연구의 목적은 2 fig.1과 같이 2차원 분류가 원통에 충돌할 때 발생하는 쐐기소리의 주파수특성의 정량적인 모델을 세우고 방사음장의 지향특성의 이론 모델을 확립하는 것이다. 먼저 주파수특성을 실험하고 되먹임이론을 적용하여 분석하므로써 유효음원의 위치를 구하고 또한, 수직벽에 작용하여 발생하는 충돌음(impinging tone)의 경우를 실험하여 주파수특성을 비교 고찰하므로써 유효음원의 위치에 관한 이론을 입증한다. 아울러 원통과 평면벽의 각 경우에 방사음장의 지향특성을 측정하고 고찰한다.2,5,6]을 단계별로 고찰하여, 점점 까다로워져 가는 선박 진동규제[3,4]에 대처하고 승무원의 안락성에 대한 욕구, 구조물의 안전성, 장비의 성능보존이 만족되는 저진동 선박의 건조를 위해 향후 해결해야할 과제들을 도출하여 선박진동분야이 연구개발 방향을 제시하고자 한다. 하는 것은 진단의 정밀도에 문제가 있을 것으로 생각된다. 따라서 언어적진리치가 도입되어 [상당히 확실], [확실], [약간 확실] 등의 언어적인 표현을 이용하여 애매성을 표현하게 되었다. 본 논문에서는 간이진단 결과로부터 추출된 애매한 진단결과중에서 가장 가능성이 높은 이상원인을 복수로 선정하고, 여러 종류의 수치화할 수 없는 언어적(linguistic)인 정보ㄷㄹ을 if-then 형식의 퍼지추론으로 종합하는 회전기계의 이상진단을 위한 정밀진단 알고리즘을 제안하고 그 유용성을 검토한다. 존재하여도 모우드 변수들을 항상 정확하게 구할 수 있으며, 또한 알고리즘의 안정성이 보장된 것이다.. 여기서는 실험실 수준의 평 판모델을 제작하고 실제 현장에서 이루어질 수 있는 진동제어 구조물에 대 한 동적실험 및 FRS를 수행하는 과정과 동일하게 따름으로써 실제 발생할 수 있는 오차나 error를 실험실내의 차원에서 파악하여 진동원을 있는 구조 물에 대한 진동제어기술을 보유하고자 한다. 이용한 해마의 부피측정은 해마경화증 환자의 진단에 있어 육안적인 MR 진단이 어려운 제한된 경우에만 실제적 도움을 줄 수 있는 보조적인 방법으로 생각된다.ofile whereas relaxivity at high field is not affected by τS. On the other hand, the change in τV does not affect low field profile but strongly in fluences on both

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.4
• /
• pp.412-418
• /
• 2020

Generally, the propeller shaft that constitutes the ship shaft system has different patterns of behavior due to the ef ects of engine power, propeller load and eccentric thrust, which increases the risk of bearing failure by causing local load variations. To prevent this, different studies of the propulsion shaft system have been conducted focused the relative inclination angle and oil film retention between the shaft and the support bearing, mainly with respect to the Rules for the Classification of Steel Ships. However, in order to secure the stability of the propulsion shaft via a more detailed evaluation, it is necessary to consider dynamic conditions, including the transient state due to sudden change in the stern wakefield. In this context, a 50,000 DWT vessel was analyzed using the strain gauge method, and the effects of propeller shaft movement were analyzed on the starboard rudder turn which is a typical transient state during normal continuous rate(NCR) operation in ballast draught condition. Analysis results confirm that the changed propeller eccentric thrust acts as a force that temporarily pushes down the shaft to increase the local load of the stern tube bearing and negatively affects the stability of the shaft system.