• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.12 s.115
• /
• pp.1206-1211
• /
• 2006

In this paper, a Balun-BPF with the balun and BPF characteristics is proposed by using dual-mode ring resonator of $1{\lambda}$. We obtained the property of balun with the phase imbalance by symmetrically placing each output of ring resonator. The dual mode has been made by impedance difference between input and output lines. The fabricated Balun-BPF shows bandwidth of 40 MHz and insertion loss of 2.4 dB at a center frequency of 2.45 GHz. It shows the phase imbalance of $180{\sim}184$ degree and the magnitude imbalance of within 1 dB. The measured frequency responses agree well with simulated ones.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.3
• /
• pp.228-235
• /
• 2002

Two kinds of experimental modal analyses have been performed on a radial tire for passenger car under fixed axle. One is the modal analysis to obtain three-dimensional modes of tire using accelerometers and the other is the one to identify cavity resonance frequency using a pressure sensor. From the first analysis, we have obtained three-dimensional natural modes and their decomposed 3-D modes in each direction, which make it possible to grasp the features of the modes that cannot be identified in the conventional 2-D modes and to classify the vibrationall modes into symmetric, non-symmetric, and antisymmetric modes in a simple way by using the experimental results. From the second experimental analysis, the cavity resonance frequency is found. Coomparing the results of the two analyses, we have Identified the three-dimensional mode of the cavity resonance. We also haute shown that natural frequencies of structural vibration depends on inflation Pressure while the cavity resonance does not.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.4
• /
• pp.363-368
• /
• 2003

In this paper, the characteristics of the horn antenna for the high power transfertation system is stuided and several kinds of a horn antenna are compared and finally a conical hem antenna using multi-mode is proposed. In the high power system, the efficiency of power transfer is very important. Therefore the feeding hem of a reflector must have a circular symmetric radiation pattern. And the side lobe must be suppressed to reduce a spillover power loss and interference. By using multi-mode in a circular hem antenna, the whole length can be shorter and the radiation pattern can be adjusted according to the shape and direction of a reflector. This is confirmed by the experiments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.237-246
• /
• 1999

A miniaturized waveguide bandpass filter is designed by combining a corrugated lowpass structure and a highpass configuration based on the cut-off effect of waveguides. It is smaller than the conventional waveguide bandpass filter composed of half-wavelength resonators and has wider spurious free characteristics. Optimized design data for a seven-order waveguide bandpass filter with the symmetrical structure are given at the center frequency of 10 GHz with 800 MHz bandwidth. Measured bandwidth of the center frequency of 9.97 GHz is 840 MHz and measured insertion loss is 0.97dB, The length of the bandpass filter is 64.38mm. The first spurious response is produced at 26.1 GHz.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.948-955
• /
• 2017

Currently, porous materials (e.g., mineral wool) are the core materials used in offshore plant panels, but in spite of their superb acoustic performance, these items must be replaced for environmental reasons. A honeycomb structure is widely used throughout the industry because of its high strength-to-weight ratio. However, research in terms of noise and vibration is minimal. An acoustic study should be conducted by taking advantage of honeycomb structures to replace porous materials. In this study, a simulation was performed assuming that a honeycomb panel is a superposition of symmetric mode and antisymmetric mode. Reliability was verified by comparing a simulation results based on a theory with a experimental results, and the possibility of the panel as a core material was evaluated by studying the sound insulation characteristics of a honeycomb. As the panel thickness increased, the coincidence frequency shifted to low frequency. As the angle between horizontal line and oblique wall and cell-size decreases, the sound insulation performance is improved. And as the cell-wall thickness increased, the sound insulation performance improved.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.11
• /
• pp.18-26
• /
• 1999

Recently, various simplified simulation techniques such as firite-difference beam propagation method and non-orthogonal coupled-mode theory have proposed to analyze the optical characteristics of tapered directional couplers supported by the coupling of two propagating modes. Although these approaches are often in sufficiently accurate, they do not provide the detailed solutions encountered in the analysis of tapered guiding structures. For this purpose, we introduce and utilize a newly developed modal transmission-line theory to analyze rigorously power transfer of the directional coupler. The numerical result reveals that the propagation constants of even and odd modes converge to a single value as increasing the spacer thickness between two symmetric tapered guides. Furthermore, 97% of the power incident into a guiding channel is transmitted to the other channel at the tapered angle ${\theta}=0.1^{\circ}$, and the efficiency of power transfer decreases dramatically as increasing the angle.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.9
• /
• pp.872-875
• /
• 2016

In this paper, the turnstile junction-based Ortho-Mode Transducer(OMT) is designed and manufactured. It is usually well-known that turnstile junctions have symmetry structure of waveguide so the higher order modes, which occurs inside the waveguide, can be cancelled. Because of these symmetrical properties, the turnstile junction-based OMTs have merits like high transmission and low return loss characteristic in broadband and two different modes propagate orthogonally in common port resulting in the fully realization of double polarization. The designed OMT has the application of Radar Seeker and operates in W-band(94 GHz), the millimeter wave frequency. The average of return loss value of manufactured OMT is lower than -20 dB and it has bandwidth characteristic of over 500 MHz.

• Proceedings of the KSRS Conference
• /
• 2000.04a
• /
• pp.43-48
• /
• 2000

중간 및 하부 대규권의 열적 상태에 대한 결과들의 상대적인 정확성을 평가하기 위하여 대기대순환 모델의 재분석(1980-93년) 그리고 세 종류의 위성관측 자료들(1980-97년)을 태평양, 한반도 부근에 대한 시.공간 분석으로 상호 비교하였다. 중간 대류권 온도를 반영하는 위성자료는 본 연구에서 유도된 Microwave Sounding Unit (MSU) 채널2 직하점 밝기온도(MSU2)와 Spencer and Christy(1992a)가 전체 주사자료를 사용하여 유도된 채널2 밝기 온도(SC2)이고, 하부 대류권 온도를 반영하는 위성자료는 Spencer and Christy(1992a)가 유도한 것이다(SC2R). 또한, 모델 자료는 ECMWF 재분석 온도이며, 위성관측 자료와의 비교를 위하여 재구성되었다. 한편, 각 위.경도 격자에서 위성관측과 모델 재분석의 월평균 값들의 상관도 전구적으로 조사하였다. 세 종류의 관측 자료들 간의 상관은 중.고위도에서 높았으나(r$\geq$0.9), 저위도 그리고 대류가 활발한 열대 서태평양 및 콩고강 부근에서 낮았다(r~0.65). 특히 SC2R에 대한 다른 자료의 상관이 상대적으로 낮았다. 이는 하부 대류권의 열적 상태를 반영하는 SC2R이 수적 및 지표방출의 영향으로 잡음을 크게 내포하기 때문인 것으로 추정되었다. 관측들과 모델 온도에 대한 월평균과 아노말리 값의 분석에서 시.공간 변동은 대체로 유사하였다. 관측 및 모델 자료는 열대 태평양 이외의 지역에 대한 월평균 값 모드1에서 연주기를 보였으나, 열대 태평양의 경우 모드2에서 보였다. 열대 태평양의 MSU2 모드1은 Walker 순환에 의한 동.서 대비를 보인 반면, 다른 위성관측과 모델 자료에서는 이러한 형태가 현저하지 않았다. 이 지역의 아노말리 값 모드2에서 위성관측들은 엘리뇨 기간에 적도를 중심으로 열대 동태평양 부근에서 아령모양의 대칭 형태를 보였으나 모델 결과에서는 이러한 특징이 약하였다. 관측과 모델 모두는 열대 태평양에 대한 아노말리 값의 모드 1,2에서 엘니뇨와 라니냐에 의한 경년변동을 뚜렷하게 보였다.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.3
• /
• pp.192-200
• /
• 2021

Korean bell is a macroscopically axi-symmetrical structure, but has a slight asymmetry due to complex patterns and casting irregularity. Small asymmetry separates one vibration mode into a mode pair with slight frequency difference. The mode pair interferes and creates a beat. The vivid beat with an appropriate period makes the bell sound magnificent and lively feeling. In this study, we propose a method to make the vivid beat using artificial dumshoi. This method creates the vivid beat by designing artificial dumshoi that overwhelms the bell asymmetry. To this end, the asymmetry of Korean bell is quantified by analyzing the beat period data of a number of Korean bells cast in modern times. Based on the measured beat period data, the magnitude of asymmetry is quantified using an equivalent bell model and artificial dumshoi is applied. The movement of mode pair by dumshoi is predicted through finite element analysis. Finally, a design example of the artificial dumshoi for clear beat is introduced.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.1
• /
• pp.143-151
• /
• 2011

Plaintext and key are independent in the existing block cipher. Also, encryption/decryption is performed by using structural features. Therefore, the external environment of suggested mixed cryptographic algorithm is identical with the existing ones, but internally, features of the existing block cipher were meant to be removed by making plaintext and key into dependent functions. Also, to decrease the loads on the authentication process, authentication add-on with dependent characteristic was included to increase the use of symmetric cryptographic algorithm. Through the simulation where the proposed cryptosystem was implemented in the chip level, we show that our system using the shorter key length than the length of the plaintext is two times faster than the existing systems.