• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.3
• /
• pp.15-25
• /
• 2019

The study was conducted to compare the chemical properties and microbial activity of soil and the crop productivity by applying homemade liquid fertilizers (LF) used in leading cucumber farms as well as to evaluate the eco-friendly LFs to substitute for a chemical fertilizer. Three homemade LFs, EM, starfish, and native microbes, and a chemical LF were regularly fertigated per three days during the growing season. Chemical LF contained the highest pH, EC (electrical conductivity), and concentrations of T-N, $P_2O_5$, K, Ca, and Mg, while the lowest EC level was observed for EM LF. Soil EC was the highest to the 3.0 dS/m for chemical LF-plots, with lowering soil pH, OM (organic matter), and Mg concentration. Soil chemical properties mostly increased in native microbes LF-plots. However, soil microbial properties were not significantly different among the LF treatment plots. OTU (operational taxonomic units), richness estimator, and diversity index of bacteria and fungi increased in the chemical LF and EM LF based on the pyrosequencing analysis. SPAD and PS II values on the treated-cucumber leaves were seasonally decreased from 32 to 60 days after transplanting, with the rapid decline observed at 45 days after transplanting. Number of leaves and crop height increased in the treatments with EM and native microbes LF. LF treated-cucumber crops were not significantly different for total fresh weight and fruit yield.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.1
• /
• pp.42-54
• /
• 2019

Crop models depend on a large number of input parameters including the cultivar parameters that represent the genetic characteristics of a given cultivar. The cultivar parameters have been estimated using high quality data for crop growth, which require considerable costs and efforts. The objective of this study was to examine the feasibility of using low quality data for the parameter estimation. In the present study, the cultivar parameters for cv. Shindongjin were estimated using the data obtained from the report of new cultivars development and research from 2005 to 2016. The root mean square errors (RMSE) of the heading dates were less than 3 days when the parameters associated with phenology were estimated. In contrast, the coefficient of determination for yield tended to be less than 0.1. The large errors incurred by the fact that no growth data collected over a season was used for parameter estimation. This suggests that detailed observation data needs to be prepared for parameter calibration, which would be aided by remote sensing approaches. The occurrence of natural disasters during a growing season has to be considered because crop models cannot take into account the effects of those events. Still, our results provide a reasonable range for the parameters, which could be used to set the boundary of a given parameter for cultivars similar to cv. Shindongjin in further studies.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.2
• /
• pp.175-184
• /
• 2019

This paper presents a modeling prototype that optimizes construction processes implementing information communication technology (ICT). Using "IAMB", each and every actual steps of the construction process may be defined visually and explicitly by elaborating ICT to improve productivity and management efficiency. It contributes to identify the features on what parts of construction task are covered by ICT, and the effects of ICT on process performance. After analyzing 10 real project cases, ICT application types are classified into four categories according to ICT type, job functions that ICT applied, and the project phase in which ICT used. As a reuslt, it was confirmed that the positive outcomes on the construction process were beneficial to mostly the general contractors and mainly obtained by automated information processing, external consignment and consistent information use. Negative effects, which were occurred by mainly manual manipulation and duplication of information handling, were accrued to general contractors minimally, but to subcontractors maximally. Expert focus group commends that several important issues should be considered when implementing ICT.

• Journal of the Society of Disaster Information
• /
• v.17 no.2
• /
• pp.289-305
• /
• 2021

Purpose: The purpose of this study is to check the importance of higher level, sub higher level and lower alternative factor and the factor for relieved life and also check the comprehensive priority in executed "Safety and relieved life level improvement of apartment house residents by AHP analysis". Method: The safety management evaluation elements and alternatives have been arranged as hierarchical structure based on the preceding studies and the advice of experts for the maintenance and system of apartment house in this study. Study model is used for the survey of pair wise comparison composition targeting experts and AHP analysis method is used for alternative plan ranking, etc. Result: The response result of survey secured the consistency and it is confirmed that safety inspection for apartment house electricity facility is most important for higher level, safety inspection, detailed inspection and diagnosis evaluation are most important for sub higher level and plumbing equipments is most important for alternatives based on the analysis result of relative weight comparison for sub higher level and alternatives for final goal attainment of the study. Conclusion: Plumbing equipments, crime prevention safety and electrical safety are shown as top priority alternatives when observe it with expert manager's point of view for apartment house. It shows that securing the importance of living safety accident and deciding the level of relieved life can be improved are the alternatives of pre-prevention and management strengthening.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.485-492
• /
• 2021

The wind turbines with a rated capacity of 50kW or less are generally considered as small class. Small wind turbines are an attractive alternative for off-grid power system and electric home appliances, both as stand-alone application and in combination with other energy technologies such as energy storage system, photovoltaic, small hydro or diesel engines. The research objective is to develop the 50kW scale wind turbine blades in ways that resemble as closely as possible with the construction and methods of utility scale turbine blade manufacturing. The mold process based on wooden form is employed to create a hollow, multi-piece, lightweight design using carbon fiber and fiberglass with an epoxy based resin. A hand layup prototyping method is developed using high density foam molds that allows short cycle time between design iterations of aerodynamic platforms. A production process of five blades is manufactured and key components of the blade are tested by IEC 61400-23 to verify the appropriateness of the design. Also, wind system with developed blades is tested by IEC 61400-12 to verify the performance characteristics. The results of blade and turbine system test showed the available design conditions for commercial operation.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.3
• /
• pp.12-21
• /
• 2011

We investigated the location and surveillance system of fortress using inter-visibility analysis between fortress and the capital of the Silla Dynasty. The digital terrain model(DTM) was generated with $10{\times}10m$ grid in Arcview 3.2. Then three fortresses lines(Myeonghwal-sanseong, Namsan-shinseong, Seohyeong-sanseong) were superimposed on the DTM. 4 results of this study were drew out from the cumulative visibility analysis. First, the most of fortress lines which showed the high visible frequency from the Sila-Capital(538 viewpoints) have a good aspect toward the capital. It means that 3 fortresses secured the visibility to the capital. Second, the cumulative visibility analysis from 3 fortresses generated evenly distributed visible frequency across the inside of fortress. It shows that the inner area of fortress is more advantageous to command during the war. On the contrary, a number of invisible(vulnerable) regions which is scattered on the outside were supplemented by adjacent fortress. Third, the north area of the Sila-captial showed the highest visible frequency generated by sum up the visibility from 3 fortresses. The northern captial is placed within 4km distance easy to support at the Myeonghwal and Seohyeong-sanseong. We proved that the Sila-capital had organized a solid surveillance system by 3 fortresses. Fourth, we could infer the practical process of fortress layout from comparing a cumulative visibility map. For the secure of visibility and defense systems, the fortress line would form a rising shape to the peak. This practical location theory can replace the vague common location theory that the fortress would constructed on two thirds of mountain height. It will be an empirical method in the ancient remains research.

• The Journal of Bigdata
• /
• v.5 no.2
• /
• pp.201-213
• /
• 2020

Despite empirical research that the response to human risk is significantly influenced affective factors, the role of affective factors has been unexplored in information privacy research. This study aims to explore the privacy behaviors of location-based service (LBS) users from an affective point of view. Specifically, the study explored the relationship between three types of privacy threats (collection, hacking, secondary use), two affects (worry, anger), and a coping behavior (continuous use intentions). The structured survey was conducted with 552 users. In order to analyze the effect of the combination of perception of particular privacy threats and particular affects on the intention of continuous use, association rules, one of the data mining techniques, was employed. As a result, there was a difference in the intention to use according to the combination of the perception of risk and affect responses, and the most significant influence on the intention is when the second use of personal information was combined with anger. This study has significant theoretical contribution in that it includes affective factors in the research of information privacy users, complementing the biases of existing cognition-oriented approaches and providing a comprehensive understanding of privacy response behavior.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.144-151
• /
• 2020

In a mobile environment, communication takes place via SMS text messages. Vocabularies used in SMS texts can be expected to use vocabularies of different classes from those used in general Korean literary style sentence. For example, in the case of a typical literary style, the sentence is correctly initiated or terminated and the sentence is well constructed, while SMS text corpus often replaces the component with an omission and a brief representation. To analyze these vocabulary usage characteristics, the existing colloquial style corpus and the literary style corpus are used. The experiment compares and analyzes the vocabulary use characteristics of the colloquial corpus SMS text corpus and the Naver Sentiment Movie Corpus, and the written Korean written corpus. For the comparison and analysis of vocabulary for each corpus, the part of speech tag adjective (VA) was used as a standard, and a distinctive collexeme analysis method was used to measure collostructural strength. As a result, it was confirmed that adjectives related to emotional expression such as'good-','sorry-', and'joy-' were preferred in the SMS text corpus, while adjectives related to evaluation expressions were preferred in the Naver Sentiment Movie Corpus. The word embedding was used to automatically construct a sentiment lexicon based on the extracted adjectives with high collostructural strength, and a total of 343,603 sentiment representations were automatically built.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1207-1217
• /
• 2022

Vegetation indices using the reflectance of selected wavelength, associating with the monitoring purpose such as identifying the progress of crop growth, on the vegetation canopy surface is widely used in the digital agriculture technology. However, the surface reflectance anisotropy can distort the true value of vegetation index related to the condition of surface, even though the surface property be unchanged. That causes difficulty to observe accurately crop growth on the monitoring system. In this study, a simple type goniometer was designed to measure the reflectance from the anisotropic surface according to various zeniths and azimuths of sun and viewing sensor in the field. On the tarp like as Lambertian surface, the reflectance of Blue, Green, Red, Near-Infrared band was similar to the tarps' reflectance properties. However, the reflectance was slightly overestimated in the cloudy day. The relative difference values of vegetation indices on grass were overestimated for the forward viewing and underestimated for the backward viewing. In addition, enhanced vegetation index (EVI) showed less sensitive according to the positions of sun and sensor viewing. Field observation with a goniometer will be helpful to understand the anisotropy characteristics on the vegetation surface.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.2
• /
• pp.71-82
• /
• 2022

In order to replace the sampling tensile test of products produced in the tab welding process, which is one of the automotive battery manufacturing processes, vision inspectors are currently being developed and used. However, the vision inspection has the problem of inspection position error and the cost of improving it. In order to solve these problems, there are recent cases of applying deep learning technology. As one such case, this paper tries to examine the usefulness of applying Faster R-CNN, one of the deep learning technologies, to existing product inspection. The images acquired through the existing vision inspection machine are used as training data and trained using the Faster R-CNN ResNet101 V1 1024x1024 model. The results of the conventional vision test and Faster R-CNN test are compared and analyzed based on the test standards of 0% non-detection and 10% over-detection. The non-detection rate is 34.5% in the conventional vision test and 0% in the Faster R-CNN test. The over-detection rate is 100% in the conventional vision test and 6.9% in Faster R-CNN. From these results, it is confirmed that deep learning technology is very useful for detecting welding error of lead tabs in automobile batteries.