• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.13-13
• /
• 2009

현재 열간단조 금형을 제작함에 있어 육성용접을 실시하는 방법이 금형강 STD61, STD11 등으로 제작하는 방법에 비해 보수나 비용적인 측면에서 이점을 가지고 있기 때문에 점차적으로 증가하고 있는 추세이다. 열간단조 공정에서 금형은 $1000^{\circ}C$이상의 고온재료와 반복접촉하게 된다. 이때 이형제의 사용은 급속냉각 및 급속가열의 열피로를 가속시킨다. 또한, 금형은 반복충격에 의한 기계적 피로를 받게 된다. 이러한 금형의 사용환경을 고려한 FCW는 종래 고가의 $2.8{\sim}3.2{\Phi}$인 외국산 FCW를 사용하였으나 이를 대체한 $3.2{\Phi}$ 태경 FCW가 국내에서 개발되었다. 하지만 개발된 FCW를 사용하여 제작된 금형의 수명이 부족한 현상이 발생하였다. 이에 금형의 수명을 연장시킬 수 있는 내균열성 및 내열충격성을 확보한 태경 FCW의 개발과 개발된 FCW의 성능평가가 요구되었다. 특히 열간단조 금형에 있어서 중요한 내열충격성의 경우 가열과 냉각의 반복 Cycle에 의한 Thermal shock의 평가가 대부분이며 높은 Cycle로 인해 많은 시간이 걸리며, 또한 가열과 냉각을 오갈 수 있는 고가의 시험장치가 요구된다. 그러므로 개발된 FCW 육성용접부의 내균열성 및 내열충격성을 평가할 수 있는 방법에 대한 연구와 특히 내열충격성을 시간이 적게 걸리면서도 경제적으로 평가할 수 있는 방법에 대한 연구가 필요하다. 본 연구의 목적은 열간단조 금형 육성용접부의 내균열성 및 열충격특성을 평가할 수 있는 방법에 대한 검토와 특히 내열충격성에 대해 J.W.Kim등의 시험방법을 참고하여 시간이 적게 걸리면서 저 비용으로 열 충격특성을 평가할 수 있는 시험법을 고안하는 것이다. 이를 위한 방법으로 육성용접부의 내균열성을 평가하기 위한 상온 Bending을 실시하였고, 내열충격성을 평가하기 위한 염욕로를 이용하는 고온 Bending을 고안하여 실시하였다. 상온 Bending, 고온 Bending 모두 3점 굽힘시험을 적용하였다. 고온 Bending의 가열방법으로는 염욕로를 사용하여 시편이 대기중에서 약 $850^{\circ}C$의 온도가 될 수 있도록 하였다. 시편은 각각 열처리를 하여 요구 경도를 확보하였고, 이를 염욕로에서 5분간 가열 및 유지하여 취출 후 굽힘하중을 가하여 변위의 정도로 열충격을 평가하는 방법을 사용하였다. 상온 Bending은 극한변형량과 파단부 극한응력으로, 고온 Bending은 고온 극한변형량으로 평가를 하였고, 외국산 FCW를 사용한 육성용접부를 비교대상으로 하였다. 평가 결과 개발된 국산 $3.2{\Phi}$ 태경 FCW의 성능은 외국산 FCW와 유사하거나 우수한 것으로 평가되었고, 실제 금형을 제작하여 현장에 적용한 결과 금형의 수명이 연장된 것이 나타났다.

• Journal of agriculture & life science
• /
• v.45 no.4
• /
• pp.135-141
• /
• 2011

This research was conducted to provide basic data of surplus heat for designing solar heat-storage systems. The surplus heat is defined as the heat exhausted by forced ventilations from the greenhouses to control the greenhouse temperature within setting limits. Various simulations were performed to compare the differences of thermal behaviors among greenhouse types as well as among several domestic areas by using pseudo-TMY (Typical Meteorological Year) data manipulated based both on the weather data supplied from Korean Meteorological Administration and the TMY data supplied from The Korean Solar Energy Society. Additional analyses were carried out to examine the required heating energy together with some others such as the energy balances in greenhouses to be considered. The results of those researches are summarized as follows. Regional surplus solar heats for the nine regions with 4-type were analyzed. The results showed that the ratio of surplus solar energy compared to heating energy was the highest in Jeju (about 212.0~228.0%) for each greenhouse type. And followed by Busan, Kwangju, Jinju, Daegu, Daejeon, Jeonju, Suwon and Daekwanryung. And irrespective of greenhouse types, surplus solar energy alone could cover up nearly all of the required supplemental heating energy except for a few areas.

• Journal of Korean Philosophical Society
• /
• v.137
• /
• pp.383-407
• /
• 2016

Considering the long time that modern man has been autonomous, it can be said that the brutal human violence prevalent around the globe today is an 'exceptional situation'. Behavior such as killing animals or devastating the natural environment are thought to be unavoidable. However, if human beings have been 'social animals' pursuing connectedness and seeking meaning in the relationships of others beyond themselves since the beginning of time, how can the incredibly powerful violence which humankind has inflicted on plants, other animals, or the earth itself be explained? With this in mind, I propose the following arguments. First, the crisis of consciousness in the loss of hope for the future of mankind under the technology of modern Western civilization has already come to a dead-end causing Western philosophers to think of ways to discover new opportunities, apparent as ecology and ecological philosophy. Second, as reality has become governed by the technology of modern Western civilization and ecological philosophical rationality fails to co-exist with this reality, an understanding of ecological philosophy should be deepened and continued. In this context, I will investigate the existential conditions for human life to continue in the future in consideration of ecological philosophy and the meaning of Forest.

• Journal of Technology Innovation
• /
• v.28 no.4
• /
• pp.151-163
• /
• 2020

The routinized tasks in the post-COVID era are to be replaced by digital technologies, while there is a high possibility that digital transformation technologies and non-routinized tasks have strong complementarity. In particular, looking at the job composition within Korea's industries, the intensities of routinized works appear to be continuously rising. It suggests that the potential side effects on the labor market caused by the acceleration of digital transformation in the post-COVID era will be greater within Korean innovation system. With this background, this study aims to provide a conceptual framework for dealing with potential crises such as, job polarization and widening gaps between workers in terms of economic earnings, based on an in-depth understanding of the inherent properties of digital transformation that will lead to structural changes in our economic and social system. In particular, focusing on the interaction between digital transformation technology and learning in the post-COVID era, this study attempts to redefine the role of the innovation policy for making a successful transition to a new equilibrium state. In addition, this study examines the institutional conditions of the Korean innovation system which affect the creative learning activities of economic actors to draw policy implications for establishing future-oriented innovation policy. Based on these approaches, this study highlights the importance of coevolution between the skills demand and skills supply to spur inclusiveness of Korean innovation system in the post-COVID era.

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.289-296
• /
• 2009

The purpose of this study was to investigate the effect of dextrinization methods (dry oven and roaster) and the ratio of dextrinized rice on the quality of Backsulgi during storage. The moisture content significantly increased with increasing the amount of dextrinized rice regardless of dextrinization methods. As the ratio of dextrinized rice increased, the L value of the Backsulgi decreased, but the a and b values increased. The a and b values of dry oven method were higher than those of roaster method due to their thermal denaturalization. However, there were no significant pattern's change in sample's colors during storage. In the texture profiles, the hardness, cohesiveness, gumminess and chewiness significantly decreased with increasing the amount of dextrinized rice depending on the dextrinization methods and the ratios. The time constant (1/k) of the Backsulgi with dextrinized rice comparatively higher than that of control and appeared to be the highest in the Backsulgi formulated by 100% of dextrinized rice. In the sensory evaluation, Backsulgi with dextrinized rice over 30% after 1day storage showed higher value in overall quality and lower value in hardness than control. The addition of 30% dextrinized rice made by roaster showed the most effective on the quality and retrogradation of Backsulgi.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.529-535
• /
• 2018

The range extender vehicle runs on a mechanism that allows the small power generation engine to start in the most efficient specific operating range to charge the battery and extend the mileage. In this study, we developed a step motor type intake air supply system that replaces existing throttle body system to develop a simple low cost control logic system. The system was applied to the existing base engine, and in order to improve the performance by increasing the amount of intake air, the effect of changing the length of the intake and exhaust manifold was experimentally examined. As a result, the Type B intake air control actuator operated by one step motor showed higher performance than the Type A in all the operation region, but the performance was lower than that of the base engine due to the increase of flow resistance. To improve this, it was confirmed that the engine performance was improved at both speeds of 2200rpm and 4300rpm when the 140mm adapter was installed in the intake manifold and when the newly designed 70mm exhaust manifold was applied. Through this process, high - precision operation control was realized by connecting the generator load to the optimized engine for the range extender electric vehicle. Experimental results showed that the speed change rate was within ${\pm}2.5%$ at 2200rpm in 1st stage and 4300rpm in 2nd stage and the speed follow-up result of 610 rpm/s was obtained when the speed was increased from 2200rpm to 4300rpm.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.4
• /
• pp.378-383
• /
• 2018

The goal of this study was to examine the growth and yield according to planting density in wide-row drill seeding cultivation suitable for mechanized harvesting. We evaluated effects depending on planting densities [row spacing (30, 40, 50, and 60 cm) and plant spacing (10, 15, and 20 cm)] and cultivars ('Hongeon' and 'Arari') on growth and yield of Adzuki Beans (Vigna angularis (Willd.) Ohwi Ohashi). When row spacing decreased, the stem length increased in 'Arari' but decreased in 'Hongeon.' The stem diameter and number of branches in both the cultivars decreased with a decrease in row spacing. The pod height increased with lower planting densities. The greatest height values recorded in 'Hongeon' and 'Arari' were 5.0 cm and 8.8 cm in $30{\times}10cm$ and $50{\times}10cm$ treatments, respectively. The number of pods and number of seeds in both cultivars tended to increase with a decrease in planting density. On the other hand, in 100-seed weight, there was a difference in planting density in 'Hongeon', but no difference in 'Arari'. The highest yield was at the planting density of $40{\times}15cm$ in both 'Hongeon' and 'Arari', $285kg{\cdot}10a^{-1}$ and $374kg{\cdot}10a^{-1}$.

• Journal of the Society of Disaster Information
• /
• v.15 no.3
• /
• pp.358-366
• /
• 2019

Purpose: This paper aims to clarify the problems and to examine the improvement methods by investigating the management condition of local-designated cultural property of which management is relatively poor in comparison with state-designated cultural heritage. Method: In order to grasp the management situation of the local-designated cultural heritage, a research on cultural heritage management situation and problems will be carried out with 35 cultual heritages in Goryeong-gun. Also, the improvement methods about the property type vulnerability on the basis of interview with cultual property managers, fire-fighting officers and civil servants, etc. Results: Local cultural heritages were investigated to be very vulnerable to the fire of wooden buildings, the theft of movable cultural heritages, and the effects of wind and water damage. It is because cultural heritages are scattered over wide areas fundamentally. As the result, it has difficulty in the patrols of police officers and fire fighters, and in the situation that it lacks disaster monitoring and CCTV for countermeasures to replace them, electronic security including fire hydrant, sensors, etc and fire extinguishing facilities and so on. It is difficult for local governments managing local-designated cultural heritages to enhance their management systems directly due to their lack of budget and manpower. Conclusion: In order to strengthen disaster and safety management system for the cultural heritages designated by local governments, they have to clarify disaster countermeasure task of fire fighting, police, and cultural heritage managers prepare their manuals, and systematize them through disaster drill mainly in local autonomous governments. Also, so as to establish a surveillance system every day, they have to enhance the community for local cultural heritage manage consisting of local volunteer fire departments, local voluntary disaster prevention organizations, volunteers, etc.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.626-631
• /
• 2019

The policy-making and technological development for the supply expansion of eco-friendly automobiles has been continuing, but the internal combustion engines still accounts for about 95%. Also, in order to meet the stricter emission regulations of internal combustion engines based on fossil fuels, the proportion of after-treatments for vehicles and (ocean going) vessels is gradually increasing. This study is a basic study for the post-Euro-VI exhaust response of CNG buses, and it is to investigate the basic characteristics according to Pd substitution transition metal effect, catalyst volume effect and space velocity. A catalysts was prepared and tested using a model gas reactor. The NGOC catalyst with 3Pd exhibited the highest catalytic activity with 22% at $300^{\circ}C$, 48% at $350^{\circ}C$ and about 75% at $500^{\circ}C$. 3Co NGOC containing 3wt% of transition metal was excellent in oxidation ability, and it was small in size of 2nm, and the degree of catalyst dispersion was improved and de-NO/CO conversion was high. The volume of the NGOC-LNT-SCR catalyst system was optimal in the combination of 1.5+0.5+0.5 with a total score of 165, considering $de-CH_4/NOx$ performance and catalyst cost. For SV $14,000h^{-1}$, the $CH_4$ reduction performance was the highest at about 20%, while the SV $56,000h^{-1}$ was the lowest at about 5%. If the space velocity is small, the flow velocity decreases and the time remaining in the catalyst volume become long, so that the harmful gas was reduced.

• Pediatric Infection and Vaccine
• /
• v.28 no.2
• /
• pp.66-81
• /
• 2021

The coronavirus disease 2019 pandemic has been continuously spreading throughout the world. As of July 15, 2021, there have been more than 188 million confirmed cases and more than 4.06 million deaths. Although the incidence of severe infections is relatively low in children and adolescents compared to adults, a complication called multisystem inflammatory syndrome in children (MIS-C) may occur in some cases at approximately 2-6 weeks after severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) infection. MIS-C can be seen in patients of various ages, from young infants to adolescents, and may present with diverse clinical manifestations. While fever present in a great majority of patients, symptoms suggesting the involvement of the digestive or nervous system and the skin and mucous membranes (Kawasaki disease-like symptoms) also appear in many cases. Cardiac involvement may also be observed, including left ventricular dysfunction, myocarditis, coronary artery dilatation, and coronary aneurysm. In some cases, hypotension or shock can occur, and mechanical ventilation or treatment in the intensive care unit may be necessary. Fortunately, recovery is generally reported after appropriate treatment. MIS-C is a rare but important complication of SARS-CoV-2 infection in children and adolescents. As such, it is important to recognize the clinical symptoms and provide appropriate treatment at an early stage. In this review, the epidemiology, clinical symptoms, suggested pathophysiology, diagnostic approach, and treatment of MIS-C will be discussed.