• Title/Summary/Keyword: 대지

Search Result 812, Processing Time 0.03 seconds

A Case Study on the Design of Tunnel Excavation in Geological Anomalies (터널굴착시 지질이상대 통과방안 설계사례 연구)

  • Yoo, Joung-Hoon;Kim, Yang-Kyun;Chung, Chul-Hwa
    • Tunnel and Underground Space
    • /
    • v.21 no.5
    • /
    • pp.341-348
    • /
    • 2011
  • As a result of the detailed site investigation performed for the design of a 4.3 km long tunnel, geological anomalies of four fault zones and a rock boundary were discovered on the tunnel route. Most of all, it was confirmed that pyrite, which may corrode steel material, is contained inside the geological anomalies, and pressured ground water flows out of the fault fractured zone. To overcome these geological conditions, antisulfur concrete for the concrete lining and anticorrosive swelling rock bolts are designed in the pyrite-containing sections. For the sections where a great amount of groundwater outflows, water blocking methods including grouting are applied according to the result of numerical analyses on the seepage. In addition, since the past earthquakes occurred around Korea have take place mainly near fault zones, seismic analyses were performed based on the Soil-Structure Interaction (SSI) concept and the strength of concrete tunnel lining is designed to be 27 MPa from 24 MPa in order to reinforce the tunnel structure.

The Study of the Process of Design on the Application of the Architectural Field Concept (건축장 개념을 적용한 설계과정 연구)

  • Lee, Seung-Yong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.8
    • /
    • pp.3698-3703
    • /
    • 2012
  • The architectural design process is consisted of the phase of programming and the phase of the design. The contemporary architectural scheme, as a datascape, a rhizome structure and a diagram, is based on the concept of modern physics. And it is applied on the phase of design by synthesizing data. Like this, the design of the architectural field is accomplished in the phase of design. For design of the architectural field, the characteristics of the architectural field is considered as the viewpoint of design in the procedure. First, according to the area which is defined by relations of environments, around architectures and so on, the net system of relations is designed as area. Second, design the linkage between building and space, building and building, space and space, according to the correspondence each other. Third, design the method or form of connecting building and space to one as a building and a space are no longer divided but are understood by one. As a result, for the design of architectural field, it is necessary to define the criteria by the characteristics of architectural field and the architectural field is designed by process.

Analysis of Korea's Crustal Movement Velocity After the Great Tohoku-Oki Earthquake by Using GPS (GPS를 이용한 토호쿠 대지진 이후 한반도 지각변동 속도 분석)

  • Ha, Ji-Hyun;Lee, Myong-Kun;Cho, Young-Sik
    • Journal of Advanced Navigation Technology
    • /
    • v.17 no.6
    • /
    • pp.600-608
    • /
    • 2013
  • The great Tohoku-oki earthquake which occurred on March 11, 2011, caused crustal movements in both Korea and Japan. This study attempts to analyze velocity changes of crustal movement of Korea Peninsula due to the Tohoku-oki earthquake and to compare the calculation with precious crustal movenents of Korea Peninsula. We found that the crustal movement velocity of South Korea increased 3.9 mm/yr northward and 7.5 mm/yr eastward on average as a result of the Tohoku-oki earthquake; when this figure is compared with the past crustal movement velocities of the Korea Peninsula.

Sea Level Valiability and Eddy in the South Indian Ocean by Multi-satellite Data (Topex/Poseidon, ERS1) (복합위성자료(Topex/Poseidon, ERS1)를 이용한 남인도양의 해수면 변화와 와동류 연구)

  • 윤홍주;서영상
    • Korean Journal of Remote Sensing
    • /
    • v.19 no.4
    • /
    • pp.271-276
    • /
    • 2003
  • Sea level variability and eddy in the Amsterdam-Crozet-Kerguelen region of the South Indian Ocean were studied during 1 year (October 15, 1992~October 15, 1993) using multi-satellite data (Topex/Poseidon, ERS1) produced by signal treatment. We found that sea level variabilities (>10cm) generally exist along the Antarctic Circumpolar Current in the area of 35$^{\circ}$~46$^{\circ}$S and strong sea level variabilities (20~30cm) were especially occurred from the effects of eddy due to bottom topography in two small area: 49$^{\circ}$~57$^{\circ}$E and 38$^{\circ}$~42$^{\circ}$S, and 58$^{\circ}$~64$^{\circ}$E and 42$^{\circ}$~44$^{\circ}$S.

Distribution of Vegetation and Geomorphology Characteristics of the Water Spider(Argyroneta aquatica) Habitat in the Jeongok Lava Plateau, Central Korea (전곡 용암대지 물거미 서식지의 지형특성과 식생 분포)

  • Lee, Min Boo;Lee, Sang Young
    • Journal of The Geomorphological Association of Korea
    • /
    • v.24 no.4
    • /
    • pp.57-73
    • /
    • 2017
  • The formation of the lava dam of the paleo lake blocked the entrance to the Chatancheon River on the Jeongok lava plateau and it suddenly transformed the terrestrial ecosystem into the aquatic one by the overflow. The spiders in the lava dam adapted in the wetland and evolved into water spiders that could survive by forming bubble houses. Since then, the lava dam was connected to the present Hantangang River due to the dissection and the lake became a terrestrial environment, a small area of marsh composed of primarily clay soil layer. Change in water level of the habitat and thus the extension of the terrestrial area made the species a endangered now. This study carried out frequency of occurrence, degree of wetness and plant habitats of the vascular plant in the water spider habitat. As a result of this study, total 180taxa are of 55 (30.6%) wetland plant groups and of 113 (62.8%) upland plant groups except facultative plant groups. Among the wetland plant groups, the Isachne globosa community occupied the largest area, where the water spiders were most observed. The result of this study, the classification and the types of vascular plant species, would provide useful information for the sustaining healthy wetland ecosystem and the restoration of the habitat for the water spiders.

Development of a test system for analysis of air bubble behavior (에어버블 거동 분석을 위한 실험장치 개발)

  • Lee, Hyo Sang;Chang, Hyung Joon;Lee, Ho Jin
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.475-475
    • /
    • 2016
  • 생활의 편의를 위하여 인간은 여러 종류의 시설을 만들고 있으며, 이에 필요한 전기를 공급하기 위하여 여러 종류의 발전소를 건설 운영하고 있다. 특히, 원자력 발전은 2014년을 기준으로 전체 전력생산량의 약 30%를 담당하고 있으며, 늘어나는 전력 수요를 감당하기 위하여 다수의 원자력 발전소 건설계획을 수립하고 있다. 원자력 발전소는 발전과정에서 생성되는 고열을 냉각시키기 위하여 다량의 물을 필요로 하기 때문에 연안에 위치한다. 물을 안정적으로 취수하는 것은 원자력 발전소의 안정성 확보에 큰 영향을 미치는 요소이다. 하지만, 유류 등의 오염 물질 또는 해파리 등의 생물체에 의하여 취수구가 마비되어 냉각수를 공급하지 못하는 사고가 종종 발생하고 있다. 원자력 발전소가 발전 중단이 되면 하루 약 10억원의 경제적 손실이 발생할 수 있고, 동일본 대지진의 예에서 확인할 수 있는 바와 같이 2차 피해가 발생하여 엄청난 재앙을 초래할 수 있다. 취수구로 유입되는 유류 등의 오염물질과 생물체를 차단하기 위하여 물리적인 방법과 생물학적 방법을 이용한 여러 가지 장치 및 기법이 고안되고 있지만, 생물학적인 방법은 개체군과 종류의 변화로 그 적용이 곤란하여 물리학적인 방법을 이용한 연구가 주를 이루고 있다. 대표적인 물리학적 장치는 해파리 제거용 그물이 있으나, 포집되는 해파리의 지속적인 제거를 위한 비용적인 문제와, 잠수부의 안전 문제가 발생하고 있다. 이와 같은 문제를 해결하기 위해서 최근 가장 주목받고 있는 방법은 에어버블을 이용하여, 유해 물질과 생물체를 차단하는 방법이다. 에어버블은 수심조건에 영향을 받지 않고, 취수구가 설치된 영역으로 유해물질의 유입 자체를 방어할 수 있어 몇 몇 선진국에서는 실용화 단계에 접어들고 있다. 본 연구에서는 에어버블 거동을 특성을 파악하기 위해서는 에어버블의 상승속도, 특성, 압력 및 수심조건 등을 고려할 수 있는 실험 장치를 개발하는 것을 목적으로 하였다. 이를 위하여 선행연구결과 및 현장조건을 고려하여, 취급이 간단하고, 실험조건 조절이 용이한 원통형 실험 장치를 개발하였다.

  • PDF

A Study on the Indirect Copy of Dancheong Patterns Using Three-dimensional Scanning (3차원 스캐닝을 활용한 단청문양의 간접전사 연구)

  • An, Ji Eun;Choi, Chan Ho;Kim, Sung June;Yoon, Man Young
    • Journal of Conservation Science
    • /
    • v.34 no.6
    • /
    • pp.471-479
    • /
    • 2018
  • Seonunsa Temple is a site of Dancheong cultural significance in Daewoongjeon. Three-dimensional (3D) scanning can be used to create a simulation in 1:1 ratio without touching the Dancheong patterns directly. The traditional method of recreating Dancheong was paining with tracing paper using a fix pin. However, manual direct copy processes can cause and damage to the objects. This study shows the results of a simulation of a tranditional Dancheong patterns as an alternative; the simulation was able to reduce dimensional errors and prevent damage by using 3D scanning. As a result, objective and precise proportions of the simulation were acquired. The 3D scanning method may be applied for work such as the replication and restoration of the drawing, 3D fabrication of the original data, and printing of the additional drawing. In addition, with the production of 3D materials, a virtual museum is possible.

A Study on the Analysis of Space Arrangement in 'Standard Korea Traditional-Houses Design' (한옥표준설계도의 평면도 공간배치 분석에 관한 연구)

  • Hwang, Yong-Woon
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.20 no.6
    • /
    • pp.579-586
    • /
    • 2019
  • The object of this study are 32 floor plans types of "Standard Korea Traditional-Houses Design=SKTHD.". The purpose of the research was to enhance the satisfaction level of users by comparing and analyzing the characteristics of the SKTHD. Research decision : 1. It tried to accommodate modern life by including space elements of modern housing, such as the 'entrance space', in the SKTHD. 2. The SKTHD. also favored the southern layout of living rooms and entrance spaces. 3.The number of bedrooms was generally planned to be two to three and it was judged that more various space and bedroom were needed to hold various functions of rural areas. 4. It has been analyzed that the depth of space is deeper to enter the entrance space(E)' than to enter from Thet-maru(TM). And as the depth of space in the Master bedroom is related to personal privacy, it is needed that the depth of space should be sufficiently.

The Theory of Load Estimation Method and Case Study of Hydraulic Breaker for Rock Drilling (진동기반 하중 추정기법의 이론 및 암반 천공용 유압 브레이커 적용사례)

  • Kim, Dae-ji;Cho, Jung-Woo;Oh, Joo-Young;Chung, Jintai;Song, Changheon
    • Tunnel and Underground Space
    • /
    • v.29 no.3
    • /
    • pp.135-147
    • /
    • 2019
  • This paper introduced a impact load estimation method by examining vibration transfer path analysis (TPA). The theoretical background and the load quantification procedure are explained, and a case study of hydraulic breaker is reported. We explained the merits and limitations of the load estimation method of TPA, and improvement method was suggested through case analyses of drilling equipment. The necessity of R&D of load-estimation technology was discussed. A new strategy for developing new techniques for impact load measurement was proposed.

Development of Infrared Target for Dual-Sensor Imaging Seeker's Test and Evaluation in HILS System (이종센서 영상탐색기 시험평가를 위한 적외선 표적원 개발)

  • Park, Changhan;Song, Sungchan;Jung, Sangwoon
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.29 no.11
    • /
    • pp.898-905
    • /
    • 2018
  • In this work, infrared targets for a developed hardware-in-the-loop simulation(HILS) system are proposed for a performance test of a dual-sensor imaging seeker equipped with an infrared and a visible sensor that can lock and track for ground and air targets. This integrated system is composed of 100 modules of heat and light sources to simulate various kinds of target and the trajectory of moving targets based on scenarios. It is possible to simulate not only the position, velocity, and direction for these targets but also background clutter and jamming environments. The design and measurement results of an infrared target, such as the HILS system configuration, developed for testing and evaluation of a dual-sensor imaging seeker are described. In the future, it is planned to test the lock-on and tracking performance of an imaging seeker equipped with single or dual sensors dynamically in real time based on a simulation flight scenario in the developed HILS system.