• Title/Summary/Keyword: 대응탄

Search Result 43, Processing Time 0.031 seconds

Oxy Combustion Characteristics of Anthracite in a 100 kWth Circulating Fluidized Bed System (100 kWth 급 순환유동층 시스템에서 무연탄 순산소연소 특성 연구)

  • Moon, Ji-Hong;Jo, Sung-Ho;Mun, Tae-Young;Park, Sung-Jin;Kim, Jae-Young;Nguyen, Hoang Khoi;Lee, Jae-Goo
    • Korean Chemical Engineering Research
    • /
    • v.57 no.3
    • /
    • pp.400-407
    • /
    • 2019
  • Oxy-combustion with a circulating fluidized bed (Oxy-CFBC) technology has been paid attention to cope with the climate change and fuel supply problem. In addition, Oxy-CFBC technology as one of the methods for carbon dioxide capture is an eco-friendly that can reduce air pollutants, such as $SO_2$, NO and CO through a flue gas recirculation process. The newly developed $100kW_{th}$ pilot-scale Oxy-CFBC system used for this research has been continuously utilizing to investigate oxy-combustion characteristics for various fuels, coals and biomasses to verify the possibility of fuel diversification. The anthracite is known as a low reactivity fuel due to a lot of fixed carbon and ash. Therefore, this study aims not only to improve combustion efficiency of an anthracite, but also to capture carbon dioxide. As a result, compared to air-combustion of sub-bituminous coal, oxy-combustion of anthracite could improve 2% combustion efficiency and emissions of $SO_2$, CO and NO were reduced 15%, 60% and 99%, respectively. In addition, stable operating of Oxy-CFBC could capture above 94 vol.% $CO_2$.

Simulation of Spinning Concentric Annular Ring Reticle Seeker and IRCCM using Correlation Coefficient (회전 동심원 레티클 탐색기의 시뮬레이션 및 상관계수를 이용한 반대응기법)

  • 홍현기;장성갑;두경수;최종수
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.25 no.5A
    • /
    • pp.763-771
    • /
    • 2000
  • Reticle systems, which are widely used in infrared (IR) missile seekers, are considered to be the classical approach for estimating the position of a target in the field of view (FOV). This paper presents an effective simulation tool that gives tracking results of the concentric annular ring reticle seeker. We construct the concentric annular ring reticle seeker on Matlab-Simulink for a dynamic simulation. Our simulation model provides tracking results in various cases, and is applicable to the study of the development of the advanced seekers. While false targets such as flares are presented in the FOV, simulation results show that the existing seeker cannot determine a precise target location. In order to decrease the susceptibility to countermeasures such as flares, we propose an efficient counter-countermeasure using the correlated relationship of modulated signals and the references. We have ascertained that the reticle seeker using our technique make more effective target tracking than previous seekers.

  • PDF

IR Signal Analysis and Band Selection for Two-color Seeker (Two-color 탐색기를 위한 적외선 신호 분석 및 대역 선정)

  • 오정수;서동선;최종수
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.25 no.1B
    • /
    • pp.112-119
    • /
    • 2000
  • A two-color infrared (IR) seeker employs two detection-bands for efficient target tracking under countermeasures and background noises. This paper describes a study on the detection-band selections for the two-color seeker. To select the detection-bands, we analysis infrared radiation characteristics of a target, a flare, and background noises and then other characteristics closely related with the received power, such as the atmospheric transmission, acquisition range, background noise effect, and signal-to-noises. The analysis shows that the pertinent bands of two-color IR seeker are 3 um~5 um for target detection and 1.5 um~l.7 um for counter-countermeasures. The results of our study will play a significant role in the further study of two-color seekers.

  • PDF

Application of Refractory Metal Powders to Military Material Fields (내열금속 분말의 국방소재 응용)

  • Kim, Young-Moo;Kim, Eun-Pyo;Lee, Seong;Noh, Joon-Woong
    • Journal of Powder Materials
    • /
    • v.14 no.4
    • /
    • pp.221-229
    • /
    • 2007
  • 이상에서 살펴본 바와 같이, 내열재료들은 고밀도를 이용하여 비행하는 물체의 운동에너지를 극대화 시킬 수 있기 때문에 군사적으로 각종 무기체계의 성능 향상에 매우 중요하다. 또한 유도 무기 및 항공기의 경우 고온, 고압 등의 환경에서 운용되기 때문에, 이러한 조건에서 견딜 수 있는 소재 개발이 필수적이다. 따라서 무기 선진국에서는 고밀도 재료인 텅스텐, 몰리브덴, 탄탈륨, 텅스텐-구리 감손우라늄을 활용하기 위한 연구를 활발하게 진행하고 있다. 이중, 텅스텐, 몰리브덴, 텅스텐-구리 라이너에 관한 연구는 괄목할 만한 연구 성과를 거두고 있다. 이러한 연구성과는 기존 탄의 관통 성능을 크게 증가시켜, 이에 대응하고자 하는 방어 체계 연구자들을 바쁘게 할 것으로 판단된다. 한편 내열 금속의 경우, 초고온 및 고압과 같은 극한 환경에서의 고온 강도 및 내삭마성이 우수하기 때문에, 각종 유도 무기 체계의 구성 부품, 즉 터빈, 밸브, 노즐, 제트 베인 등에 적용되고 있으나 대부분의 내열 재료들은 제조 방법이 까다롭고, 가공성이 나쁘며, 고가라는 단점들이 있어 이를 극복하는 연구들이 현재 진행 중에 있다.

Trends and Prospects of Adsorption Technology for Indoor Carbon Dioxide Reduction (실내 이산화탄소 저감을 위한 흡착 기술의 동향 및 전망)

  • Kang, Hyerin;Lee, Ye Hwan;Eom, Hanki;Kim, Sung Su
    • Prospectives of Industrial Chemistry
    • /
    • v.23 no.4
    • /
    • pp.1-12
    • /
    • 2020
  • 최근 실내 공기질(IAQ; indoor air quality)을 악화시키는 물질 중 하나인 이산화탄소 저감 연구가 다수 진행되고 있다. 현재 이산화탄소를 저감하는 방법에는 흡착법, 흡수법, 막분리법 등이 있다. 그 중 흡수법은 액체 상태의 흡수제를 분사하는 공정 특성상 실내에 적용하기 어렵고 2차 오염물 또는 폐수가 발생할 수 있다. 또한, 막분리법은 이산화탄소 분리를 위한 응집 및 침전과 같은 전처리 과정이 필요하므로 실내 이산화탄소 저감에 적합하지 않다. 반면, 흡착법은 비교적 저렴하고 운영이 간단하여 적용 사례가 증가하였으며, 유동 인구가 많고 환기가 어려운 지하철, 버스 등의 대중교통 차량 내부 및 교실, 사무실, 공공시설에서 배출되는 실내 이산화탄소를 제어할 수 있다는 장점이 있어 가장 적합한 해결책으로 알려져 있다. 흡착 공정에 사용되는 대표적인 흡착제 종류에는 활성탄, 제올라이트, 알루미나 등이 있으며, 이 흡착제들을 개질 및 성형하여 흡착제의 성능 및 기계적 강도를 증진시키는 고도화 연구가 활발히 수행되고 있다. 이처럼 적용 대상 내 설치 및 교체가 용이하도록 하는 흡착제 제조 기술 개발이 필요한 실정이며, 흡착제를 상용화 수준까지 발전시킴으로써 강화된 실내 공기질 규제 기준에 대한 대응 및 삶의 질 향상이 기대된다.

Assessment of GHG Emission Reduction Potential in Extension of Nuclear and Renewable Energy Electricity Generation (원자력과 신재생에너지 발전설비 확대에 따른 온실가스 저감 잠재량에 관한 연구)

  • Jun, Soo-Young;Park, Sang-Won;Song, Ho-Jun;Park, Jin-Won
    • Journal of Energy Engineering
    • /
    • v.18 no.3
    • /
    • pp.191-202
    • /
    • 2009
  • South Korea, ranks 10th largest emitter of carbon dioxide in the world, will probably be under the obligation to reduce GHG emission from 2013. It is very important to reduce the electrical energy consumption since 30% of GHG emission in South Korea is made during electricity generation. In this study, based on "the 1st national energy master plan", the GHG emission reduction potential and the feasibility of the scenario in the electricity generation have been analyzed using LEAP(Long-range Energy Alternative Planning system). The scenario of the mater plan contains the 41% expansion of nuclear power plant facilities and the 11% diffusion of renewable energy until 2030. In result, total $CO_2$ emission reduction rate is 28.8% in 2030. Also $CO_2$ emission of unit electricity generation of bituminous coal power plant is $0.85kgCO_2/kWh$ and its LNG power plant is $0.51kgCO_2/kWh$ in BAU scenario. Therefore when existing facilities is exchanged for nuclear or renewable energy power plant, substitute of bituminous power plant is more effective than LNG power.

Applicability of Various Biomasses to Pulverized Coal Power Plants in Terms of their Grindability (다양한 바이오매스의 분쇄도 실험을 통한 미분탄 화력발전 적용가능성 연구)

  • Kang, Byeol;Lee, Yongwoon;Ryu, Changkook;Yang, Won
    • Clean Technology
    • /
    • v.23 no.1
    • /
    • pp.73-79
    • /
    • 2017
  • Recently usage of biomass is increased in pulverized coal power plants for reduction of $CO_2$ emission. Many problems arise when thermal share of the biomass is increased, and milling of the biomasses is one of the most important problems due to their low grindability when existing coal pulverizer is used. Grindability of coal can be measured through the HGI (Hardgrove grindability index) equipment as a standard, but method of measuring biomass grindability has not been established yet. In this study, grinding experiment of coal and biomass was performed using a lab-scale ball mill. One type of coal (Adaro coal) and six biomasses (wood pellet (WP), empty fruit bunch (EFB), palm kernel shell (PKS), walnut shell (WS), torrefied wood chip (TBC) and torrefied wood pellet (TWP)) were used in the experiment. Particle size distributions of the fuels were measured after being milled in various pulverization times. Pulverization characteristics were evaluated by portion of particles under the diameter of $75{\mu}m$. As a result, about 70% of the TBC and TWP were observed to be pulverized to sizes of under $75{\mu}m$, which implies that they can be used as alternative biomass fuels without modification of the existing mill. Other biomass was observed to have low grindability compared with torrefied biomass. Power consumption of the mill for various fuels was measured as well, and the results show that lower power was consumed for torrefied biomasses. This result can be used for characterization of biomass as an alternative fuel for pulverized coal power plants.

조직적 환경에 따른 ERP 구축방법이 변화관리와 성과에 미치는 영향에 관한 연구

  • 김승윤;장윤희;손정희;이재범
    • Proceedings of the Korean Operations and Management Science Society Conference
    • /
    • 2003.05a
    • /
    • pp.63-69
    • /
    • 2003
  • 90년대부터 많은 ERP를 도입하여 회사의 전체 업무를 통합시키고 실시간으로 모든 업무를 동시에 처리함에 따라 경영환경과 정보기술의 급격한 변화에 대처하고 있다. 이러한 ERP 시스템을 도입하던 기존의 업무 수행절차와 방법대신 ERP 패키지가 제공하는 프로세스와 기능을 적용하여 기업 내 업무기능을 혁신한다는 특징을 가지고 있어 조직변화를 수반하게 된다. 따라서 효과적인 ERP 구면을 위해서는 기업의 환경에 적절한 구축방법을 정하고 변화관리 이행 프로그램을 필요로 하고 있다. 본 연구에서는 ERP를 구축하는데 어떠한 조직적 환경요인이 영향을 미지고. ERP 구축방법에 따라 변화관리의 특성이 어떻게 달라지며. 변화관리가 ERP 성과에 어떠한 영향을 미치는지 파악하기 위한 프레임워크를 제시하고 이틀 근간으로 하여 상이한 구축방법을 통하여 ERP틀 구면탄 두 기업을 대상으로 심도있게 비교 분석함으로써 ERP 구축환경의 특성과 ERP 구축방법에 따른 변화관리 특성 및 ERP성과를 살펴보았다. 연구결과 ERP 구축방법은 ERP 구축환경에 따라 차이를 보였으며, ERP 구축 방법에 따라서 변화기법이 달라진다는 사실을 알 수 있었다. 그러나 변화관리 방법 중에서도 최고 경영자의 리더십과 현업 직원의 적극적인 참여 및 전사적인 커뮤니케이션은 ERP 구축방법과 관계없이 중요한 요인으로 나타났다. 그리고 ERP 구축방법에 있어서 변화관리 활동은 ERP 성과에 긍정적인 영향을 미쳤다. 본 사례연구로 얻은 시사점은 ERP의 구현하고자 하는 국내 기업들이 ERP 구축방법을 선정하고 적합탄 변화관리 방법의 전개를 위하여 실질적인 도움을 줄 것이다.6 전문가 그룹을 통해 시범적으로 적응하는 것으로 시작해, 학교 및 연구소를 통한 정보지식 공유 그리고 기업 정보화 솔루션으로 활용 될 수 있다.을 제시한다. 이렇게 함으로써 최대한 고객 납기를 만족하도록 계획을 수립할 수 있게 된다. 본 논문에서 제시하는 계획 모델을 사용함으로써 고객 주문에 대한 대응력을 높일 수 있고, 계획의 투명성으로 인한 전체 공급망의Bullwhip effect를 감소시킬 수 있는 장점이 있다. 동시에 이것은 향후 e-Business 시스템 구축을 위한 기본 인프라 역할을 수행할 수 있게 된다. 많았고 년도에 따른 변화는 보이지 않았다. 스키손상의 발생빈도는 초기에 비하여 점차 감소하는 경향을 보였으며, 손상의 특성도 부위별, 연령별로 다양한 변화를 나타내었다.해가능성을 가진 균이 상당수 검출되므로 원료의 수송, 김치의 제조 및 유통과정에서 병원균에 대한 오염방지에 유의하여야 할 것이다. 확인할 수 있었다. 이상의 결과에 의하면 고농도의 유기물이 함유된 음식물쓰레기는 Hybrid Anaerobic Reactor (HAR)를 이용하여 HRT 30일 정도에서 충분히 직접 혐기성처리가 가능하며, 이때 발생된 $CH_{4}$를 회수하여 이용하면 대체에너지원으로 활용 가치가 높은 것으로 판단된다./207), $99.2\%$(238/240), $98.5\%$(133/135) 및 $100\%$ (313)였다. 각각 두 개의 요골동맥과 우내흉동맥에서 부분협착이나 경쟁혈류가 관찰되었다. 결론: 동맥 도관만을 이용한 Off pump CABG를 시행하여

  • PDF

Removal of tar and particulate from gasification process using pre-coating technology (바이오매스 가스화 공정의 생성가스 중 타르 및 입자 제거를 위한 pre-coating 기술 연구)

  • Kim, Joon-Yub;Choi, Byoung-Kwon;Jo, Young-Min;Kim, Sang-Bum
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.20 no.12
    • /
    • pp.804-815
    • /
    • 2019
  • Due to the depletion and environmental problems of fossil fuel, biomass has arisen as an alternative energy source. Biomass is a renewable and carbon-neutral source. However, it is moister and has lower energy density. Therefore, biomass needs thermal chemical conversion processes like gasification, and it does not only produce a flammable gas, called 'syngas', which consists of CO, H2, and CH4, but also some unwanted byproducts such as tars and some particulates. These contaminants are condensed and foul in pipelines, combustion chamber and turbine, causing a deterioration in efficiency. Thus this work attempted to find a method to remove tars and particles from syngas with a filter which adopts a pre-coating technology for preventing blockage of the filter medium. Hydrated limestone powder and activated carbon(wood char) powder were used as the pre-coat materials. The removal efficiency of the tars was 86 % and 80 % with activated carbon(wood char) coating and hydrated limestone coating, respectively.

The Bending Strength Properties and Acoustic Emissions to Sloped Finger-Jointed Pinus densiflora S. et Z. (소나무 경사핑거접합재의 휨강도성능과 AE 특성)

  • Byeon, Hee-Seop;Ahn, Sam-Keun;Kim, Jong-Man
    • Journal of the Korean Wood Science and Technology
    • /
    • v.27 no.1
    • /
    • pp.30-36
    • /
    • 1999
  • This paper describes the relationship between the bending strength properties of sloped finger-jointed woods and the acoustic emissions (AEs) generated during the test. Pinus densiflora pieces were cut in sloped-finger types and glued with four kinds of adhesives (polyvinyl acetate, polyvinyl-aeryl, oilic urethane and resorcinol-phenol resin). The results were as follows: The lower the bending strength(load) was, the earlier the generation time of AE event count got and the higher the increasing rate of AE event count became in the sloped finger-jointed specimens bonded with polyvinyl acetate and oilic urethane resin adhesives. Therefore, the slope from load-AE cumulative event count curve was very steep. The AE event count for resorcinol-phenol resin adhesive obtained even from low load level was abundant. The AE event count continuously increased as load increased and the event count was much more than one in the other conditions. The slope from load-AE cumulative event count curve was very gentle compared with other conditions. The patterns of AE event count and count were very similar. The relationship between the MOR and the AE parameter from load and AE cumulative event count in the early stage of the sloped finger-jointed specimens bonded with polyvinyl acetate, oilic urethane and resorcinol-phenol resin adhesives was much greater than that between the MOE and the MOR. Therefore, the AE signals obtained during bending test are useful for estimating the strength of sloped finger-jointed specimens.

  • PDF